Blazer half cabs - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prof · 06-16-2015, 09:46 AM

I have a metal one, made in Minnesota, for $500.00 if anyone is interested.

**invicta455** · 06-17-2015, 11:31 AM

I'll take it how much

**invicta455** · 06-17-2015, 11:32 AM

For shipping to nc

LUV2XCLR8 · 06-18-2015, 04:51 PM

Quote:

Originally Posted by Prof

I have a metal one, made in Minnesota, for $500.00 if anyone is interested.

That's a Steal. My glass one was also made in Minnesota (MTP)

MuppetMan · 06-18-2015, 10:18 PM

Is this available ? I'm interested! Shipped to Washington. Where are you located ?
Posted via Mobile Device

LUV2XCLR8 · 08-05-2014, 06:25 AM

Bringing this back from the dead cause I just scored a MTP
1/2 Top and I need a new window seal for it? She has the
rear slider in it, looks exactly like the one "Jaros44sr" has.

PS - I sold that bulkhead along with my Pacesetter top.

jaros44sr · 08-05-2014, 08:38 PM

Nice, post up some pics mounted on a 2wd.....LMK if you find a gasket, mine is separated alittle

LUV2XCLR8 · 12-12-2014, 04:00 PM

Quote:

Originally Posted by jaros44sr

Nice, post up some pics mounted on a 2wd

Well better late than never, haven't been on much

If you look closely you can see the Aluminum cheater
bar in pic #1 running across under the rear of my top.

Still need to get the minor spots on it fixed & paint it.
(Also need the bulkhead repaired, bottom is all gone)

LUV2XCLR8 · 08-06-2014, 02:00 PM

Mine's still intact, but separated in both
corners just like your one corner. Don't
have it on yet do to no visors and my
Windshield header doesn't have the
holes in center for other brackets.

Bulkhead isn't real good, but does fit
better than one I got from you. She
needs a little TLC. I just couldn't
pass her up once I saw pic's.

LUV2XCLR8 · 10-02-2014, 05:26 PM

Jim, Have yet to find a gasket, but got it mounted.

I made an Aluminum cheater bar to hold rear down
for the CTC trip until I can have bulkhead repaired.

I will try to post a few pic's this weekend on Blazer.

**DeadheadNM** · 11-17-2014, 08:18 AM

Here's one...with optional deer stand for extra passengers.

Chulisohombre · 11-17-2014, 04:11 PM

And it's for sale apparently.

**DeadheadNM** · 12-26-2014, 08:45 PM

One more:

MuppetMan · 06-17-2015, 04:00 PM

Posted via Mobile Device

MuppetMan · 06-17-2015, 04:01 PM

I'm interested....
Posted via Mobile Device
Posted via Mobile Device

bcdeutsch731 · 08-19-2015, 01:20 PM

Here is my dad's 72 with a half cab on it. We took a 06 ccsb chevy duramax and shortened the frame and put the 72 body on it. Just got it done a couple weeks ago. Paint still needs to be wet sanded and buffed but it looks good!

Chulisohombre · 08-19-2015, 03:32 PM

Nice blazermax. Looks like the drivetrain fits well.

**jav418** · 08-20-2015, 10:28 PM

Quote:

Originally Posted by bcdeutsch731

Here is my dad's 72 with a half cab on it. We took a 06 ccsb chevy duramax and shortened the frame and put the 72 body on it. Just got it done a couple weeks ago. Paint still needs to be wet sanded and buffed but it looks good!

Do you have any photos of the build? I'd love to know how it fits, and how much work was done to make it fit.

Looks amazing!

LUV2XCLR8 · 10-07-2015, 12:23 PM

Finished product (In primer)

New seal and Glass tinted

Bulkhead not done yet.

Chulisohombre · 10-07-2015, 01:04 PM

Looks great

jaros44sr · 10-07-2015, 07:42 PM

Quote:

Originally Posted by LUV2XCLR8

Finished product (In primer)

New seal and Glass tinted

Bulkhead not done yet.

Craig, looks great, can you pull back and get some pics of the whole truck

FishinOrFixin · 10-11-2015, 12:55 PM

Stumbled across this

LUV2XCLR8 · 10-15-2015, 07:25 AM

Quote:

Originally Posted by Chulisohombre

Looks great

TY

Quote:

Originally Posted by skorpioskorpio

This is an original that you redid?

Yes, it is a MTP I acquired last year

Quote:

Originally Posted by FishinOrFixin

Stumbled across this

I had one of those, sold it last year
because you have to drill into the
windshield header to attach front.

Quote:

Originally Posted by jaros44sr

Craig, looks great, can you pull back and get some pics of the whole truck

I guess

twaters24 · 07-28-2016, 02:10 PM

Does anyone know if there is somewhere that you can still purchase these half cabs or even full top?

LUV2XCLR8 · 08-19-2015, 03:58 PM

My MTP 1/2 Cab is in a buddy's shop
being reworked. I did get my glass
back today from the tint guy.

06-17-2015, 11:31 AM	#2
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 531	Re: Blazer half cabs I'll take it how much

06-17-2015, 11:32 AM	#3
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 531	Re: Blazer half cabs For shipping to nc

08-05-2014, 06:25 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazer half cabs Bringing this back from the dead cause I just scored a MTP 1/2 Top and I need a new window seal for it? She has the rear slider in it, looks exactly like the one "Jaros44sr" has. PS - I sold that bulkhead along with my Pacesetter top. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-05-2014, 08:38 PM	#7
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,446	Re: Blazer half cabs Nice, post up some pics mounted on a 2wd.....LMK if you find a gasket, mine is separated alittle __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-06-2014, 02:00 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazer half cabs Mine's still intact, but separated in both corners just like your one corner. Don't have it on yet do to no visors and my Windshield header doesn't have the holes in center for other brackets. Bulkhead isn't real good, but does fit better than one I got from you. She needs a little TLC. I just couldn't pass her up once I saw pic's. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-16-2015, 09:46 AM	#1
Prof Registered User Join Date: Sep 2002 Location: Winnipeg Canada Posts: 135	Re: Blazer half cabs I have a metal one, made in Minnesota, for $500.00 if anyone is interested.

06-18-2015, 10:18 PM	#5
MuppetMan Registered User Join Date: Nov 2012 Location: CANADA Posts: 147	Is this available ? I'm interested! Shipped to Washington. Where are you located ? Posted via Mobile Device

10-02-2014, 05:26 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazer half cabs Jim, Have yet to find a gasket, but got it mounted. I made an Aluminum cheater bar to hold rear down for the CTC trip until I can have bulkhead repaired. I will try to post a few pic's this weekend on Blazer. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-17-2014, 08:18 AM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,337	Re: Blazer half cabs Here's one...with optional deer stand for extra passengers. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

11-17-2014, 04:11 PM	#12
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs And it's for sale apparently. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

12-26-2014, 08:45 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,337	Re: Blazer half cabs One more: Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-17-2015, 04:00 PM	#14
MuppetMan Registered User Join Date: Nov 2012 Location: CANADA Posts: 147	Re: Blazer half cabs Posted via Mobile Device

06-17-2015, 04:01 PM	#15
MuppetMan Registered User Join Date: Nov 2012 Location: CANADA Posts: 147	I'm interested.... Posted via Mobile Device Posted via Mobile Device

08-19-2015, 01:20 PM	#16
bcdeutsch731 Registered User Join Date: Mar 2010 Location: West Chicago, IL Posts: 140	Re: Blazer half cabs Here is my dad's 72 with a half cab on it. We took a 06 ccsb chevy duramax and shortened the frame and put the 72 body on it. Just got it done a couple weeks ago. Paint still needs to be wet sanded and buffed but it looks good! Attached Images __________________ 1969 C10, 2005 LLY Duramax, Wagler Competition built motor, Bullseye Power triple Turbo's, Rossler th400, Neal Chance Racing Converter, Danville Performance tunning. 8.3@168mph 1700+ HP

08-19-2015, 03:32 PM	#17
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs Nice blazermax. Looks like the drivetrain fits well. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.



Register or Log In To remove these advertisements.

10-07-2015, 12:23 PM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazer half cabs Finished product (In primer) New seal and Glass tinted Bulkhead not done yet. Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-07-2015, 01:04 PM	#20
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs Looks great __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

10-11-2015, 12:55 PM	#22
FishinOrFixin Registered User Join Date: Sep 2014 Location: Biloxi, MS Posts: 92	Re: Blazer half cabs Stumbled across this Attached Images

07-28-2016, 02:10 PM	#24
twaters24 Registered User Join Date: Jul 2016 Location: Council Grove, KS Posts: 7	Re: Blazer half cabs Does anyone know if there is somewhere that you can still purchase these half cabs or even full top?

08-19-2015, 03:58 PM	#25
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Blazer half cabs My MTP 1/2 Cab is in a buddy's shop being reworked. I did get my glass back today from the tint guy. Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Register or Log In To remove these advertisements.