Do you need '64-'66 Chevy Truck Parts?

[madaca]

I am needing some part to convert back to column shift. I have a 65 fleetside. I need the spring, shim and pin for the shifter. Here is a diagram. You can see the parts that I am needing. Pm me if you got it. Thanks

[LILRED66]

Originally Posted by madaca

I am needing some part to convert back to column shift. I have a 65 fleetside. I need the spring, shim and pin for the shifter. Here is a diagram. You can see the parts that I am needing. Pm me if you got it. Thanks

I have these parts, if you still need them. $20.00 shipped.

[Muleman100]

I need headlight bezels for a 1966, steel not stainless

[LILRED66]

Originally Posted by Muleman100

I need headlight bezels for a 1966, steel not stainless

Thanks for the inquiry and per your description, it appears you are looking for the factory painted headlight bezels that went on a factory painted grille...if so, I have a few sets in good, used condition.

They are $25.00 a pair, shipped, via UPS, Ground. I will pull the best set I have and they are very nice, ready to be installed, painted white.

FYI, the factory "chrome" grilles were not chromed steel or stainless steel, they were anodized aluminum.

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

[badblu97]

I know you listed 4-5-6 parts, but I would REALLY like to throw a 60-63 Dash in my square body...know where I could find one?

[LILRED66]

Originally Posted by badblu97

I know you listed 4-5-6 parts, but I would REALLY like to throw a 60-63 Dash in my square body...know where I could find one?

badblu97:

Thanks for the inquiry. I am fresh-out of '60-'63 specific stuff, so I don't have any dashes at this time. If you need one, post a new topic under this forum, Parts for Sale, and you will get some replies.

If you can't find what you need on this great site (not joking when I say great), you may also try a fellow named RJ at www.stovebolt.com. He is out of Denver, CO. He specializes in '60-'66 Chevy truck/Suburban/panel stuff. Also a fellow named colettesbro on the stovebolt, out of Minneapolis, MN sells a lot of '60-'66 Chevy truck stuff, as well.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts in the future.

[LinkbeltOE]

I need a 66 c10 hood can you help me out?

[LILRED66]

Originally Posted by LinkbeltOE

I need a 66 c10 hood can you help me out?

Good morning and thanks for the inquiry. I have 3 or 4 good, used, rust-free, dent-free 4-5-6 Chevy truck hoods, however, packaging & shipping will be a bit painful, I guess-timate $125.00-$150.00, via common carrier.

[283 Man]

Tony do you have any good 350 turbo 3 speed transmisions short tails.. price??? maybe picture thanks buddy..

[duallyjams]

pm sent

[LILRED66]

Originally Posted by duallyjams

pm sent

I received your PM and payment. Thanks for your business.

[Bob'sK10CHEVY]

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

Thanks for the inquiry. I don't have any factory 4-barrel carb/intake setups. I have sold two 4-barrel breathers in the past few weeks, so I am out of these, as well.

Thanks for the opportunity and please keep me in mind for other good, used 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

Bob:

I do have a few good, used factory Harrison 4-core radiators. I just had one re-cored, but it was $400.00, to do so. It looks like new and has the factory tranny line connections on the bottom tank for an automatic transmission. Also, I just purchased a 3-core from O'Reillys for around $200.00. This was after checking the offerings from LMC Truck and Classic Parts, since both are in the Kansas City area and I could visually inspect them before purchasing one. Needless to say, they say they are factory replacements, but the tanks are not even close, plus the cost was about double what I paid for the radiator from O'Reillys. If you are interested, please let me know and I will reply accordingly. Thanks for the opportunity.

[ironhorse1973]

I need a Flow Control Valve Spring for a power steering pump. Anybody have one?

Thanks,

Chris V
ironhorse1973@comcast.net

[LILRED66]

Originally Posted by ironhorse1973

I need a Flow Control Valve Spring for a power steering pump. Anybody have one?

Thanks,

Chris V
ironhorse1973@comcast.net

I don't have one of these. Sorry I couldn't help.

[nbrfd007]

Tony,
Do you have the custom windshield trim for my 62 suburban.
Thanks,
Tim

[z24god]

Hey im looking for a speaker and bracket setup that hold the speaker and radio could you send me a PM if you have any of those parts

[LILRED66]

Originally Posted by z24god

Hey im looking for a speaker and bracket setup that hold the speaker and radio could you send me a PM if you have any of those parts

I have both, but the speaker will need to be refit, because it is 45+ years old and the paper cone and speaker fish cloth is dry, brittle and deterioated. The factory speaker had soldered connections at the speaker with a factory connector at the head unit. Do you need this, as well?

Please let me know if this suits your needs and I will reply accordingly. Thanks for the opportunity.

[chev-obsession]

Do you have any doors with no rust? If so how much for the them and shipped to 99337? If you would consider shipping them?

[LILRED66]

Originally Posted by chev-obsession

Do you have any doors with no rust? If so how much for the them and shipped to 99337? If you would consider shipping them?

Hey chev-obsession. Thanks for the inquiry. I sell good, used door shells for $200.00, plus shipping, via UPS-Ground, estimated to be $60.00-$85.00, depending on location and whether it is a business or residence. They are virtually rust-free and dent-free with only minor blemishes. I alway weld-up/smooth any random, non-factory mirror holes.

If there is any minor rust-thru, I cut-out and repair the area, including smoothing the welds. I don't do any skimming, primer or paint, so the repaird area, if any, can be seen.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

[chev-obsession]

Originally Posted by LILRED66

Hey chev-obsession. Thanks for the inquiry. I sell good, used door shells for $200.00, plus shipping, via UPS-Ground, estimated to be $60.00-$85.00, depending on location and whether it is a business or residence. They are virtually rust-free and dent-free with only minor blemishes. I alway weld-up/smooth any random, non-factory mirror holes.

If there is any minor rust-thru, I cut-out and repair the area, including smoothing the welds. I don't do any skimming, primer or paint, so the repaird area, if any, can be seen.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

allrighty thanks a bunch!

[gulfcoast66]

Ttt

[LILRED66]

ron19:

Send me your GMC horn button and I will send you a good Chevy bowtie horn button. Let me know.

Also, I have a complete underdash harness or the ignition connection with pigtails, so you can splice the wires and the firewall connector with pigtails, so you can splice the wires.

I will send you a PM with prices.

[joe231]

Hey Tony,
I have a gmc horn button also, want to swap me for a chevy? need pics?