AL Cab for parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c20pickup · 12-12-2013, 02:57 PM

Quote:

Originally Posted by NPilot1975

C20,

Went to UPS today, shipping is $23.

will you take 40$ for the patch and shipping?

badazmalibu · 12-12-2013, 03:55 PM

Npilot, did you have a chance to get me a quote on the area I asked about in the photo behind the dash? Thanks!

NPilot1975 · 12-15-2013, 10:07 PM

Badazmalibu,

Sorry, just got it cut out and boxed today. I will do my best to get you a shipping quote tomorrow.

c20pickup · 12-16-2013, 03:28 PM

50$? do you accept money orders?

NPilot1975 · 12-16-2013, 03:43 PM

I have never receive a money order but don't have an issue with doing one. $25 + $23 shipping. $48

PM me if you need personal info to complete

NPilot1975 · 12-16-2013, 05:36 PM

Badazmalibu, UPS quote was $26.75, she said it could be +/- a few dollars with a whole address (I used 34952 zip). If you have a commercial address she said it would be a few dollars cheaper. $25 + $26.75 shipping $51.75

Let me know,
Jamison

rich67 · 12-16-2013, 05:51 PM

did you say you are using the outer cab floor that connects to inner rockers? bout anywhere from 6-12 inches wide by full length of rockers. both sides. including the gutters.

NPilot1975 · 12-16-2013, 05:55 PM

Most if it is cut. Needed the area over the cab supports. I can get you pix of what is left.

badazmalibu · 12-19-2013, 09:57 PM

Quote:

Originally Posted by NPilot1975

Badazmalibu, UPS quote was $26.75, she said it could be +/- a few dollars with a whole address (I used 34952 zip). If you have a commercial address she said it would be a few dollars cheaper. $25 + $26.75 shipping $51.75

Let me know,
Jamison

Do you have a picture of the panel please?

NPilot1975 · 12-19-2013, 10:05 PM

I cut it big enough to cover the area and drilled out the spot welds.

NPilot1975 · 12-19-2013, 10:09 PM

Another. I sanded the corner with all the spot weld holes with a flap disc and it is solid. Any rust you see is surface and easily cleaned off. The cab came from New Mexico.

ajgriffin · 12-20-2013, 12:59 AM

Any chance the gas pedal and cable are still in it?

NPilot1975 · 12-20-2013, 01:00 AM

Gas pedal was gone before I got it, sorry

badazmalibu · 12-20-2013, 09:04 AM

Quote:

Originally Posted by NPilot1975

Another. I sanded the corner with all the spot weld holes with a flap disc and it is solid. Any rust you see is surface and easily cleaned off. The cab came from New Mexico.

Looks good...send me a PM with your paypal info and i will send the payment...Thanks,Brett

NPilot1975 · 01-03-2014, 07:24 PM

Ttt

chevyguy_72 · 01-04-2014, 01:15 PM

what did you decide about the A-pillar?

NPilot1975 · 01-06-2014, 02:00 PM

Chevyguy, I don't need the A pillar for my truck. Is just above the hinge bolts enough and how much of the corner of the roof do you need?

68C20 · 01-08-2014, 07:50 PM

Do you have a high hump transmission tunnel?
Thanks

chevyguy_72 · 01-09-2014, 12:07 PM

let me double check tonight and i will get back to you..

NPilot1975 · 01-09-2014, 02:01 PM

68C20, I do have 2 high hump transmission covers. One with no holes and the other has holes for stick and transfer case shifter. You will have to give me some time, but I will get pix of both and post them.

doghousecustoms · 01-09-2014, 08:32 PM

do you still have the back of the cab lower 4 inchs up

**jmader** · 01-09-2014, 10:32 PM

Do you still have the piece Youey highlighted in post #3? I am looking for the same section.

NPilot1975 · 01-09-2014, 10:40 PM

Jmader, Yes, see posts 12 and 13. Still looks the same.

NPilot1975 · 01-09-2014, 10:45 PM

Doghousecustoms, I will try and get you some pix the weekend. The cab corners to around the back has been cut out. Post #42 is how both sides look.

**jmader** · 01-09-2014, 11:37 PM

Here is the area I need. How much would it be shipped to 68803?

12-12-2013, 03:55 PM	#52
badazmalibu Registered User Join Date: May 2013 Location: Palm City, Fl Posts: 86	Re: Cab for parts Npilot, did you have a chance to get me a quote on the area I asked about in the photo behind the dash? Thanks!

12-15-2013, 10:07 PM	#53
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Badazmalibu, Sorry, just got it cut out and boxed today. I will do my best to get you a shipping quote tomorrow. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-16-2013, 03:28 PM	#54
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: Cab for parts 50$? do you accept money orders?

12-16-2013, 03:43 PM	#55
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts I have never receive a money order but don't have an issue with doing one. $25 + $23 shipping. $48 PM me if you need personal info to complete __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-16-2013, 05:36 PM	#56
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Badazmalibu, UPS quote was $26.75, she said it could be +/- a few dollars with a whole address (I used 34952 zip). If you have a commercial address she said it would be a few dollars cheaper. $25 + $26.75 shipping $51.75 Let me know, Jamison __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-16-2013, 05:51 PM	#57
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Cab for parts did you say you are using the outer cab floor that connects to inner rockers? bout anywhere from 6-12 inches wide by full length of rockers. both sides. including the gutters.

12-16-2013, 05:55 PM	#58
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Most if it is cut. Needed the area over the cab supports. I can get you pix of what is left. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-19-2013, 10:05 PM	#60
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts I cut it big enough to cover the area and drilled out the spot welds. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-19-2013, 10:09 PM	#61
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Another. I sanded the corner with all the spot weld holes with a flap disc and it is solid. Any rust you see is surface and easily cleaned off. The cab came from New Mexico. Attached Images __________________ 1972 Blazer body...need to get a thread started for the rest of the story

12-20-2013, 12:59 AM	#62
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: Cab for parts Any chance the gas pedal and cable are still in it? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

12-20-2013, 01:00 AM	#63
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Gas pedal was gone before I got it, sorry __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-03-2014, 07:24 PM	#65
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Ttt __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-04-2014, 01:15 PM	#66
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Cab for parts what did you decide about the A-pillar?

01-06-2014, 02:00 PM	#67
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Chevyguy, I don't need the A pillar for my truck. Is just above the hinge bolts enough and how much of the corner of the roof do you need? __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-08-2014, 07:50 PM	#68
68C20 Registered User Join Date: May 2009 Location: Helena, AL Posts: 86	Re: Cab for parts Do you have a high hump transmission tunnel? Thanks __________________ Russ 68 C20 long bed Stepside Daily Driver 64 Oldsmobile Dynamic 88



Register or Log In To remove these advertisements.

01-09-2014, 12:07 PM	#69
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Cab for parts let me double check tonight and i will get back to you..

01-09-2014, 02:01 PM	#70
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts 68C20, I do have 2 high hump transmission covers. One with no holes and the other has holes for stick and transfer case shifter. You will have to give me some time, but I will get pix of both and post them. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-09-2014, 08:32 PM	#71
doghousecustoms Registered User Join Date: Mar 2013 Location: boca raton fl Posts: 153	Re: Cab for parts do you still have the back of the cab lower 4 inchs up

01-09-2014, 10:32 PM	#72
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Cab for parts Do you still have the piece Youey highlighted in post #3? I am looking for the same section. __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

01-09-2014, 10:40 PM	#73
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Jmader, Yes, see posts 12 and 13. Still looks the same. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-09-2014, 10:45 PM	#74
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Cab for parts Doghousecustoms, I will try and get you some pix the weekend. The cab corners to around the back has been cut out. Post #42 is how both sides look. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

01-09-2014, 11:37 PM	#75
jmader Senior Member Join Date: Aug 2013 Location: Grand Island, NE Posts: 1,483	Re: Cab for parts Here is the area I need. How much would it be shipped to 68803? __________________ 1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy)

Register or Log In To remove these advertisements.