How about some pics of bagged C-10's - Page 36 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 10-06-2010, 10:41 AM

Quote:

Originally Posted by PLANETGETLOW

If you weren't running the bags on the trailing arms would there be a reason to keep them?

Couldn't you just run the 3-link and do a bag over axle and eliminate the trailing arms?

Just thinkin here because we're getting ready to do my sons and am trying to decide if a 3 link or 4 link is better.

When you put the air bag over the axle your ride isn't as good. Plus when mounted on the trailing arm you will get more lift.
Nice job Bill

PLANETGETLOW · 10-06-2010, 10:45 AM

Quote:

Originally Posted by Strodder

When you put the air bag over the axle your ride isn't as good. Plus when mounted on the trailing arm you will get more lift.
Nice job Bill

Thanks for the reply. With the bags on the trailing arms can you still pull a payload and lay LOW?

c10layinlow · 10-08-2010, 02:19 AM

you can still lay frame in the rear with this set up right?

68 Quad C10 · 09-30-2010, 05:53 PM

Nice

*project 67 sub* · 09-30-2010, 06:54 PM

x2

draggin70 · 10-03-2010, 12:28 AM

Here are a few of the engine... I just picked up a polished TPI " THANKS CRAIGSLIST "

VA72C10 · 10-03-2010, 01:03 AM

Very nice!!! That TPI looks great!

**67cheby** · 10-04-2010, 10:08 AM

i have always loved those tpi, i had one once and had it chrome plated but never got to run it... looks great

Lightnin2699 · 10-05-2010, 08:40 PM

Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped.

djw32 · 10-09-2010, 11:27 PM

Quote:

Originally Posted by Lightnin2699

Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped.

What does the rear suspension consist of? Stock truck arms and bags?

Very nice looking truck.

Lightnin2699 · 10-10-2010, 09:32 PM

Quote:

Originally Posted by djw32

What does the rear suspension consist of? Stock truck arms and bags?

Very nice looking truck.

Thank you man.. and yes it is stock trailing arms, bags, 2" block spacers, and a standard c-notc in the frame.
Posted via Mobile Device

bcutt · 11-14-2010, 10:05 AM

Quote:

Originally Posted by Lightnin2699

Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped.

what's the back spacing on those wheels? They look great.

Lightnin2699 · 10-05-2010, 09:15 PM

VA72C10 Here a pic of the bed frame ....

VA72C10 · 10-05-2010, 08:46 PM

looks good. Is that a repop bedside? If so, how's the fit for you? I've heard they're pretty good.

Lightnin2699 · 10-05-2010, 08:58 PM

Quote:

Originally Posted by VA72C10

looks good. Is that a repop bedside? If so, how's the fit for you? I've heard they're pretty good.

Yes its a repop, got the sides front panel and tailgate from LMC as for the fit its not to bad... I made my own bed floor so i could bring the gas tank up, hide the tanks and compresor, and allow the pot to not hit the bed floor. Right now the front panels a little low on the pass side by about 1/4" and the tailgate sits maybe an 1/8 to 1/16" to high but im happy, when im ready ill start messing with fitment. And thanks for the compliment!

Michael Hill · 10-05-2010, 09:01 PM

nice truck are those wheels from raceline? how much did you pay for them?

Lightnin2699 · 10-05-2010, 09:10 PM

Quote:

Originally Posted by Michael Hill

nice truck are those wheels from raceline? how much did you pay for them?

PM'd u... thanks man

menace121978 · 10-05-2010, 09:12 PM

Quote:

Originally Posted by Michael Hill

nice truck are those wheels from raceline? how much did you pay for them?

x2... racelines??

Lightnin2699 · 10-05-2010, 09:16 PM

Quote:

Originally Posted by menace121978

x2... racelines??

207 speedsters raceline

menace121978 · 10-05-2010, 09:17 PM

doh... i just noticed your sig

Lightnin2699 · 10-05-2010, 09:18 PM

Quote:

Originally Posted by menace121978

doh... i just noticed your sig

ha ha no prob man!

jasonhall · 10-05-2010, 09:29 PM

Great looking truck!

c10layinlow · 10-08-2010, 02:23 AM

never mind i just answered my own question.. i guess it helps if you look at the pages before this one.

jasonhall · 10-08-2010, 01:05 PM

Mine is starting to get there

ksbrktracer · 10-08-2010, 01:35 PM

I wish I was that far along ..... still got a long ways to go . Jason what bags are you using on your truck ?

10-08-2010, 02:19 AM	#3
c10layinlow Registered User Join Date: Apr 2010 Location: livermore Posts: 58	Re: How about some pics of bagged C-10's you can still lay frame in the rear with this set up right? Last edited by c10layinlow; 10-08-2010 at 02:20 AM. Reason: mess up

09-30-2010, 05:53 PM	#4
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: How about some pics of bagged C-10's Nice __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

09-30-2010, 06:54 PM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: How about some pics of bagged C-10's x2

10-03-2010, 12:28 AM	#6
draggin70 Registered User Join Date: Jun 2009 Location: Murrieta California Posts: 43	Re: How about some pics of bagged C-10's Here are a few of the engine... I just picked up a polished TPI " THANKS CRAIGSLIST " Attached Images

10-03-2010, 01:03 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of bagged C-10's Very nice!!! That TPI looks great! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-04-2010, 10:08 AM	#8
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's i have always loved those tpi, i had one once and had it chrome plated but never got to run it... looks great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2010, 08:40 PM	#9
Lightnin2699 Registered User Join Date: Jun 2009 Location: Easton, MD Posts: 13	Re: How about some pics of bagged C-10's Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped. Attached Images __________________ 72' C10 Short Bed Fleetside 350, 4L80E, bagged UNDER CONSTRUCTION 22's .207 Speedsters /BLACK/ 11' Silverado 1500 Crew Cab w/ Escalade 22's /BLACK/ 00' Silverado Ext. Cab Step Side 5.3l SS Silverado 20's /BLACK/(Sold) 00' Yukon XL 3" Skyjacker lift 20's w/ 275 65 /BLACK/

10-05-2010, 09:15 PM	#13
Lightnin2699 Registered User Join Date: Jun 2009 Location: Easton, MD Posts: 13	Re: How about some pics of bagged C-10's VA72C10 Here a pic of the bed frame .... Attached Images __________________ 72' C10 Short Bed Fleetside 350, 4L80E, bagged UNDER CONSTRUCTION 22's .207 Speedsters /BLACK/ 11' Silverado 1500 Crew Cab w/ Escalade 22's /BLACK/ 00' Silverado Ext. Cab Step Side 5.3l SS Silverado 20's /BLACK/(Sold) 00' Yukon XL 3" Skyjacker lift 20's w/ 275 65 /BLACK/

10-05-2010, 08:46 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of bagged C-10's looks good. Is that a repop bedside? If so, how's the fit for you? I've heard they're pretty good. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-05-2010, 09:01 PM	#16
Michael Hill Registered User Join Date: Feb 2008 Location: Avondale, Arizona Posts: 54	Re: How about some pics of bagged C-10's nice truck are those wheels from raceline? how much did you pay for them?

10-05-2010, 09:17 PM	#20
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: How about some pics of bagged C-10's doh... i just noticed your sig __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

10-05-2010, 09:29 PM	#22
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: How about some pics of bagged C-10's Great looking truck!

10-08-2010, 02:23 AM	#23
c10layinlow Registered User Join Date: Apr 2010 Location: livermore Posts: 58	Re: How about some pics of bagged C-10's never mind i just answered my own question.. i guess it helps if you look at the pages before this one.

10-08-2010, 01:05 PM	#24
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: How about some pics of bagged C-10's Mine is starting to get there Attached Images

10-08-2010, 01:35 PM	#25
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: How about some pics of bagged C-10's I wish I was that far along ..... still got a long ways to go . Jason what bags are you using on your truck ? Last edited by ksbrktracer; 10-08-2010 at 01:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.