OR 100's of 73/80 pick up and blazer parts F/S - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flashed · 03-16-2015, 08:56 PM

Thomas ,money order is on the way (this morning) for the 2 door striker posts and the 1 red marker light .
Thanks
John

DLTruck1973 · 03-16-2015, 10:36 PM

Quote:

Originally Posted by flashed

Thomas ,money order is on the way (this morning) for the 2 door striker posts and the 1 red marker light .
Thanks
John

Thank you John,

I have everything set aside for you and will let you k ow when the MO arrives and when the parts ship.

Thank you again,
Thomas

mattcrp1 · 03-23-2015, 02:24 PM

Just got my bezel, super happy.

Thanks,

Matt

77K10Silverado · 03-23-2015, 02:48 PM

Received the bezel and panel insert. Looks great and good shipping!

Best,
Mike B.

DLTruck1973 · 03-23-2015, 04:41 PM

Thank you guys. Glad you are happy with the parts and they made it safe.

Thomas

78stepside · 03-23-2015, 06:34 PM

PM sent

flashed · 03-23-2015, 08:00 PM

My parts arrived today and were well packaged ,I have not tore into them real well yet but the red marker light is perfect for my old truck and I found the original unbroken one I took off a couple of years back when I replaced them with the amber ones .Im sure the door strikers are fine too ,just have not dug that deep yet .
Thanks again
John

DLTruck1973 · 03-23-2015, 08:05 PM

Quote:

Originally Posted by flashed

My parts arrived today and were well packaged ,I have not tore into them real well yet but the red marker light is perfect for my old truck and I found the original unbroken one I took off a couple of years back when I replaced them with the amber ones .Im sure the door strikers are fine too ,just have not dug that deep yet .
Thanks again
John

Glad to hear John.

Please let us know if you ever need anything else.

Thank you again,
Thomas

mongoose45056 · 03-25-2015, 02:26 PM

I am interested in a complete set of the carpet hold down trim plates for a 73-75 Blazer hipped to 45056 if you have any or all please let me know. Thanks.

DLTruck1973 · 03-25-2015, 03:15 PM

Quote:

Originally Posted by mongoose45056

I am interested in a complete set of the carpet hold down trim plates for a 73-75 Blazer hipped to 45056 if you have any or all please let me know. Thanks.

Here is the best set I have for you. These are stainless so you could work on them and make them nice. The front one actually just needs a good polish. The rear one has a few dents. I tried to show in the photos.

$50.00 for the pair and you would be looking at $35.00 for shipping, so $85.00 total. Let me know.

Thank you for the interest,
Thomas

DLTruck1973 · 03-25-2015, 03:47 PM

Quote:

Originally Posted by mongoose45056

I am interested in a complete set of the carpet hold down trim plates for a 73-75 Blazer hipped to 45056 if you have any or all please let me know. Thanks.

Here are the photos

mongoose45056 · 03-26-2015, 02:38 PM

Thomas, I will take them, do you have the 90's Left and Rights too? PM me and I will send payment. Thank you!!

DLTruck1973 · 03-26-2015, 02:55 PM

Quote:

Originally Posted by mongoose45056

Thomas, I will take them, do you have the 90's Left and Rights too? PM me and I will send payment. Thank you!!

PM on the way,

Thank you,
Thomas

78stepside · 04-06-2015, 06:50 PM

Thomas,

I got my parts. Thanks so much again.

Dave

DLTruck1973 · 04-06-2015, 07:16 PM

Quote:

Originally Posted by 78stepside

Thomas,

I got my parts. Thanks so much again.

Dave

Thank you for your business Dave. Glad everything got there OK for you.

Thomas

DLTruck1973 · 04-06-2015, 07:19 PM

To our valued customers and friends, we will be off line for from the end of day Tuesday 4/7/2015 - 4/13/2015 to attend the Portland swap meet. I may be on line for a very limited time but will be sure to answer all request as soon as possible.

Thank you in advance for your business and patients,
Thomas

77shorty · 04-06-2015, 09:26 PM

Hi...I'll see you at the swap meet.....I'm needing the horshoe molding for a 77/gold stripe right side fender/passenger......hope you still have it. Thanks,
Mark

DLTruck1973 · 04-07-2015, 11:28 AM

Quote:

Originally Posted by 77shorty

Hi...I'll see you at the swap meet.....I'm needing the horshoe molding for a 77/gold stripe right side fender/passenger......hope you still have it. Thanks,
Mark

Yes I still have it but it has a nice ding in it. I have a nicer one with black trim that could use paint also.

We will be in space 5100 at the meet and the 3 before it.

See you there. Let me know if you want this.

Thank you,
Thomas

77shorty · 04-12-2015, 09:27 PM

Quote:

Originally Posted by DLTruck1973

Yes I still have it but it has a nice ding in it. I have a nicer one with black trim that could use paint also.

We will be in space 5100 at the meet and the 3 before it.

See you there. Let me know if you want this.

Thank you,
Thomas

Thomas, yes I'll take it....shipping is what it is.....let me know when you want to Paypal...Nice meeting you btw.

Mark

DLTruck1973 · 04-13-2015, 06:18 PM

Quote:

Originally Posted by 77shorty

Thomas, yes I'll take it....shipping is what it is.....let me know when you want to Paypal...Nice meeting you btw.

Mark

Yes it was nice to meet you as well. What a crazy week there. I will send you a PM with payment information.

Thank you,
Thomas

77shorty · 04-21-2015, 12:08 AM

Quote:

Originally Posted by DLTruck1973

Yes I still have it but it has a nice ding in it. I have a nicer one with black trim that could use paint also.

We will be in space 5100 at the meet and the 3 before it.

See you there. Let me know if you want this.

Thank you,
Thomas

Hi Thomas....just a heads up that I sent you the money for this molding via Paypal....thanks, Mark.

DLTruck1973 · 04-21-2015, 11:43 AM

Quote:

Originally Posted by 77shorty

Hi Thomas....just a heads up that I sent you the money for this molding via Paypal....thanks, Mark.

Hi Mark,

Yes I have your paypal and address. I will get your parts molding shipped today. Still playing catch up from a week off at the swap meet.

Thank you again,
Thomas

LeesTruk · 04-26-2015, 07:36 PM

Interested in the lh. battery tray (73-80), a 19" radiator support cover, and two park light housings. Shipping to CT 06040

Thanks

mongoose45056 · 04-09-2015, 02:11 PM

Received the carpet hold downs - thank you very much they are now on there way to straightened and polished to better than new condition and will be a real asset for my show truck that is under construction - Thanks again!!

texas4x4hoe · 04-12-2015, 08:28 PM

Converting my 85 'Burb to early style frontend. I need some grille/trim stuff shipped to 75949. Also could use the wiper arm linkage if you have it.

1x, 73/74 base grill with good tabs…$40.00
1x, 73/80 upper grill trim, minor blemishes...$10.00 each
1x, 73/80 lower grill trim, minor blemishes...$10.00 each
1 pair, 73/78 (6) pair of head light bezels…$15.00
1 lower grill valance…$30.00
1x, (3) wiper motors...$15.00 each
1 pr of vent windows soft ray tinted...$30.00 each

03-16-2015, 08:56 PM	#1
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 100's of 73/80 pick up and blazer parts F/S Thomas ,money order is on the way (this morning) for the 2 door striker posts and the 1 red marker light . Thanks John

03-23-2015, 02:24 PM	#3
mattcrp1 Registered User Join Date: May 2010 Location: Mountain House, CA Posts: 555	Re: 100's of 73/80 pick up and blazer parts F/S Just got my bezel, super happy. Thanks, Matt __________________ My Chevy habit is paid for by Ford diesels... Here is my SLOW LS install: http://67-72chevytrucks.com/vboard/s...55#post6456355 Caliper Rebuild: http://67-72chevytrucks.com/vboard/s...d.php?t=613748 Upper Control Arm Bushings: http://67-72chevytrucks.com/vboard/s...d.php?t=616974 IG mattcrp1

03-23-2015, 02:48 PM	#4
77K10Silverado Registered User Join Date: Jul 2014 Location: Winston-Salem, NC Posts: 561	Re: 100's of 73/80 pick up and blazer parts F/S Received the bezel and panel insert. Looks great and good shipping! Best, Mike B. __________________ *Mike B.* 77 K10 - http://67-72chevytrucks.com/vboard/s...=1#post6752641

03-23-2015, 04:41 PM	#5
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: 100's of 73/80 pick up and blazer parts F/S Thank you guys. Glad you are happy with the parts and they made it safe. Thomas

03-23-2015, 06:34 PM	#6
78stepside Registered User Join Date: Dec 2014 Location: Blackstone, ma. Posts: 13	Re: 100's of 73/80 pick up and blazer parts F/S PM sent

03-23-2015, 08:00 PM	#7
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 100's of 73/80 pick up and blazer parts F/S My parts arrived today and were well packaged ,I have not tore into them real well yet but the red marker light is perfect for my old truck and I found the original unbroken one I took off a couple of years back when I replaced them with the amber ones .Im sure the door strikers are fine too ,just have not dug that deep yet . Thanks again John

03-25-2015, 02:26 PM	#9
mongoose45056 Registered User Join Date: Aug 2014 Location: Oxford, Ohio Posts: 41	Re: 100's of 73/80 pick up and blazer parts F/S I am interested in a complete set of the carpet hold down trim plates for a 73-75 Blazer hipped to 45056 if you have any or all please let me know. Thanks.

03-26-2015, 02:38 PM	#12
mongoose45056 Registered User Join Date: Aug 2014 Location: Oxford, Ohio Posts: 41	Re: 100's of 73/80 pick up and blazer parts F/S Thomas, I will take them, do you have the 90's Left and Rights too? PM me and I will send payment. Thank you!!

04-06-2015, 06:50 PM	#14
78stepside Registered User Join Date: Dec 2014 Location: Blackstone, ma. Posts: 13	Re: 100's of 73/80 pick up and blazer parts F/S Thomas, I got my parts. Thanks so much again. Dave

04-06-2015, 07:19 PM	#16
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: 100's of 73/80 pick up and blazer parts F/S To our valued customers and friends, we will be off line for from the end of day Tuesday 4/7/2015 - 4/13/2015 to attend the Portland swap meet. I may be on line for a very limited time but will be sure to answer all request as soon as possible. Thank you in advance for your business and patients, Thomas

04-06-2015, 09:26 PM	#17
77shorty Registered User Join Date: Apr 2015 Location: Portland, Or Posts: 100	Re: 100's of 73/80 pick up and blazer parts F/S Hi...I'll see you at the swap meet.....I'm needing the horshoe molding for a 77/gold stripe right side fender/passenger......hope you still have it. Thanks, Mark

04-26-2015, 07:36 PM	#23
LeesTruk Registered User Join Date: Mar 2015 Location: Manchester, CT Posts: 429	Re: 100's of 73/80 pick up and blazer parts F/S Interested in the lh. battery tray (73-80), a 19" radiator support cover, and two park light housings. Shipping to CT 06040 Thanks

04-09-2015, 02:11 PM	#24
mongoose45056 Registered User Join Date: Aug 2014 Location: Oxford, Ohio Posts: 41	Re: 100's of 73/80 pick up and blazer parts F/S Received the carpet hold downs - thank you very much they are now on there way to straightened and polished to better than new condition and will be a real asset for my show truck that is under construction - Thanks again!!

04-12-2015, 08:28 PM	#25
texas4x4hoe Registered User Join Date: Jul 2011 Location: Lufkin, Texas Posts: 4	Re: 100's of 73/80 pick up and blazer parts F/S Converting my 85 'Burb to early style frontend. I need some grille/trim stuff shipped to 75949. Also could use the wiper arm linkage if you have it. 1x, 73/74 base grill with good tabs…$40.00 1x, 73/80 upper grill trim, minor blemishes...$10.00 each 1x, 73/80 lower grill trim, minor blemishes...$10.00 each 1 pair, 73/78 (6) pair of head light bezels…$15.00 1 lower grill valance…$30.00 1x, (3) wiper motors...$15.00 each 1 pr of vent windows soft ray tinted...$30.00 each



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.