post your 67-72 4x4 - Page 43 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 03-27-2014, 08:53 PM

Beautiful Sub, nice axle's besides the cool engine.

JasonLS1 · 03-28-2014, 03:31 AM

that is one awesome burban !

C10Again · 04-03-2014, 01:55 PM

My new toy.

mud.man.rj · 04-03-2014, 11:21 PM

Good toy choice, whats the plans for it, 6" lift..35's..LS..

C10Again · 04-05-2014, 12:23 PM

Quote:

Originally Posted by mud.man.rj

Good toy choice, whats the plans for it, 6" lift..35's..LS..

No lift yet. Need to sort everything out and get it back on the road this summer first.

mud.man.rj · 04-05-2014, 01:51 PM

Always stuff to sort out isn't there, good truck to start with. What are the specs on it, small block, auto. Any more pic's of it, under hood and cab.

ryanroo · 04-05-2014, 03:55 PM

Quote:

Originally Posted by RLONG

When I bought it and what it looks like now!

very clean blazer, your improvements are great. that roll bar looks a little oil patch-esque....

69SWB4X4 · 04-05-2014, 04:08 PM

67 Cab? Didn`t think small back window was an option in 68.

ryanroo · 04-05-2014, 04:15 PM

i may be wrong, but i think some 68s had the small window. early in the year as they used up the stock. or it could be a mutt. either way a cool truck.

72_K10_Vegas · 04-05-2014, 07:21 PM

Barn find from North Eastern Oregon.

No rust,

Stripped to the frame now

C10Again · 04-06-2014, 08:59 PM

Quote:

Originally Posted by 72_K10_Vegas

Barn find from North Eastern Oregon.

No rust,

Stripped to the frame now

Nice! I like the slots too!

**JIMs70GMC** · 04-14-2014, 08:53 PM

My 70:

mud.man.rj · 04-14-2014, 11:36 PM

ok, busted. If your back you have to post multiple pic's till everyone is happy.

Maxxd07 · 04-15-2014, 12:42 AM

Quote:

Originally Posted by 69SWB4X4

67 Cab? Didn`t think small back window was an option in 68.

Big window was an option in 68. My spid has it listed as an option.

jamesjones · 04-15-2014, 04:47 AM

This is what mine looked like before I blew up the engine and it sat for six years...

BigRed76 · 04-15-2014, 10:41 PM

Quote:

Originally Posted by Maxxd07

Big window was an option in 68. My spid has it listed as an option.

The big back window, also called panoramic, was an option in 67. In 68 the big back window was standard and the only window available.

SS Tim · 04-15-2014, 11:04 PM

While I haven't looked much into it, there are reputed very early 68 small window trucks. Since the inital FMVSS regulations cited for the many changes in 68 did not become effective until Jan 68 it is possible, in theory, some were made.

But that said, I would also be interested in seeing this 68 SPID listing the A10. Even more so of a 68 (light duty) with a small back window.
Having the big window RPO A10 Panoramic or a variation listed on the SPID is probable during transitions like this. It may have also be a "mandatory option" during the standardization process.

Instrumentboy · 04-24-2014, 08:58 AM

I recently picked this truck up. I bought it locally in Canada but it came from Oregon a few years ago. It is titled as a 1968 but has a small back window. I've exhausted every avenue trying to figure out if it is real. The SPID is missing which would tell me it is not real. It has had an extensive amount of work done to it at some point. (Lift, motor, complete repaint in and out). I am going to remove the swampers and install 33"x12.5" on rally rims.

glimmertwin01 · 04-24-2014, 10:41 AM

nice find..welcome to truck heaven

**elpound** · 04-28-2014, 05:47 PM

I have a couple trucks. One is a 68 that I traded for a year ago. It is original except for the 350 crate motor I put in it. My other one is as 70 short bed that my Dad gave me 30 years ago. Started out as a 2wd. I'm having it totally rebuilt with 3/4 running gear with a 572 big block with a 67 front clip and wide bed.. It has been going on for 3 years. Hope to have it finished this summer.

randyhummel · 04-30-2014, 07:52 AM

1970 Chevy before and in progress I changed it to a period correct bed and added Chevy rallies

mud.man.rj · 04-30-2014, 09:01 PM

Nice to see the proper bed and the ralley's look a lot better too.

**JIMs70GMC** · 04-30-2014, 10:24 PM

Here's what my GMC looked like before I sold it:

Before the step side bed:

BLAZERMAN · 05-07-2014, 10:04 PM

Quote:

Originally Posted by JIMs70GMC

My 70:

That's a Tuff looking long step you have there, wish it were in my driveway!

**JIMs70GMC** · 05-09-2014, 09:42 PM

Quote:

Originally Posted by BLAZERMAN

That's a Tuff looking long step you have there, wish it were in my driveway!

It took me almost 9 years to buy it back, I think I will keep it for awhile.

03-27-2014, 08:53 PM	#1051
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 Beautiful Sub, nice axle's besides the cool engine. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

03-28-2014, 03:31 AM	#1052
JasonLS1 Registered User Join Date: Jul 2013 Location: Gallup, NM Posts: 102	Re: post your 67-72 4x4 that is one awesome burban ! __________________ 70 Chevelle \| 71 Camaro RS/SS \| 71 K20 \| 98 TransAm \| 10 Ducati 848

04-03-2014, 01:55 PM	#1053
C10Again Registered User Join Date: Apr 2014 Location: NC Posts: 13	Re: post your 67-72 4x4 My new toy. Attached Images

04-03-2014, 11:21 PM	#1054
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 Good toy choice, whats the plans for it, 6" lift..35's..LS.. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

04-05-2014, 01:51 PM	#1056
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 Always stuff to sort out isn't there, good truck to start with. What are the specs on it, small block, auto. Any more pic's of it, under hood and cab. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

04-05-2014, 04:08 PM	#1058
69SWB4X4 Registered User Join Date: Oct 2013 Location: Oklahoma Posts: 54	Re: post your 67-72 4x4 67 Cab? Didn`t think small back window was an option in 68. __________________ If you think you can... Or think you can`t.. You are right.

04-05-2014, 04:15 PM	#1059
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: post your 67-72 4x4 i may be wrong, but i think some 68s had the small window. early in the year as they used up the stock. or it could be a mutt. either way a cool truck. __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-05-2014, 07:21 PM	#1060
72_K10_Vegas Registered User Join Date: Mar 2014 Location: Las Vegas Nevada Posts: 93	Re: post your 67-72 4x4 Barn find from North Eastern Oregon. No rust, Stripped to the frame now Attached Images

04-14-2014, 08:53 PM	#1062
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: post your 67-72 4x4 My 70: Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

04-14-2014, 11:36 PM	#1063
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 ok, busted. If your back you have to post multiple pic's till everyone is happy. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

04-15-2014, 04:47 AM	#1065
jamesjones Freakin Awesome! Join Date: Jul 2003 Location: San Diego Posts: 482	Re: post your 67-72 4x4 This is what mine looked like before I blew up the engine and it sat for six years... __________________ 1972 K5 Blazer - LQ4/TH350/NP205 - Long Travel Suspension - Hooptee

04-15-2014, 11:04 PM	#1067
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: post your 67-72 4x4 While I haven't looked much into it, there are reputed very early 68 small window trucks. Since the inital FMVSS regulations cited for the many changes in 68 did not become effective until Jan 68 it is possible, in theory, some were made. But that said, I would also be interested in seeing this 68 SPID listing the A10. Even more so of a 68 (light duty) with a small back window. Having the big window RPO A10 Panoramic or a variation listed on the SPID is probable during transitions like this. It may have also be a "mandatory option" during the standardization process. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 04-15-2014 at 11:18 PM.

04-24-2014, 08:58 AM	#1068
Instrumentboy Registered User Join Date: Jul 2013 Location: Lloydminster, Alberta Posts: 4	Re: post your 67-72 4x4 I recently picked this truck up. I bought it locally in Canada but it came from Oregon a few years ago. It is titled as a 1968 but has a small back window. I've exhausted every avenue trying to figure out if it is real. The SPID is missing which would tell me it is not real. It has had an extensive amount of work done to it at some point. (Lift, motor, complete repaint in and out). I am going to remove the swampers and install 33"x12.5" on rally rims. Attached Images

04-24-2014, 10:41 AM	#1069
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 nice find..welcome to truck heaven __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

04-28-2014, 05:47 PM	#1070
elpound Active Member Join Date: Dec 2009 Location: Killdeer ND Posts: 118	Re: post your 67-72 4x4 I have a couple trucks. One is a 68 that I traded for a year ago. It is original except for the 350 crate motor I put in it. My other one is as 70 short bed that my Dad gave me 30 years ago. Started out as a 2wd. I'm having it totally rebuilt with 3/4 running gear with a 572 big block with a 67 front clip and wide bed.. It has been going on for 3 years. Hope to have it finished this summer. Attached Images



Register or Log In To remove these advertisements.

04-30-2014, 07:52 AM	#1071
randyhummel Registered User Join Date: Aug 2009 Location: Tiffin ohio Posts: 29	Re: post your 67-72 4x4 1970 Chevy before and in progress I changed it to a period correct bed and added Chevy rallies Attached Images

04-30-2014, 09:01 PM	#1072
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 Nice to see the proper bed and the ralley's look a lot better too. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

04-30-2014, 10:24 PM	#1073
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: post your 67-72 4x4 Here's what my GMC looked like before I sold it: Before the step side bed: __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Register or Log In To remove these advertisements.