02-17-2005, 10:42 AM | #126 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
I found this on another site. Thought you guys might enjoy it....
The owner says- I went "truck hunting" in morgan minnesota with a couple friends and we picked up a green '51 Ford F-6 Dually with a hydraulic dump bed for FREE. You read that right, free. Hadn't been on the roads since 1986 but all the tires still held air, I had the engine running in a week and the only things actually wrong with the truck were a broken drivers side window and some wiring issues. Truck is abso-****in-lutely rust free. And a clear title. |
02-17-2005, 11:13 AM | #127 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Did you correct him? Throw the old BS flag?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
02-17-2005, 11:42 AM | #128 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Wow, that's nice looking Ford F-6 It is a hoss of a GMC C6500!!!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
02-17-2005, 05:24 PM | #129 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
you guys are missing it! he started talking about the ford, and low and behold...... this BIG GMC came and ate it! just look at it .....would you tell it any different?
__________________
1972 GMC Sierra Grande |
02-18-2005, 11:02 AM | #130 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
gotcha now, I thought that was the pic the guy posted of his "find" while truck hunting.
I hope it didn't get gas from eating the ford!
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm |
02-19-2005, 08:11 PM | #131 |
Registered User
Join Date: Dec 2004
Posts: 7
|
Hey 67 C-30
Is that Long Horn a 4x4 and where is it located cause i live in Al Redneck 72 |
02-20-2005, 01:52 AM | #132 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Redneck 72,
I do not know where its from. Its just a pic I found on the net.
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
02-27-2005, 12:44 AM | #133 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Got a great bed for my '67!!
I bought a very decent '69 C-10 yesterday to use for my dually project. This bed has no rust, no major dents or dings and is very nice.I will have to fill the marker light holes, but that's not a big deal. Actually the whole truck very solid. There is a scratch dent in the bottom of the passenger door, but is otherwise very straight. I am going to keep this cab, doors, and front clip for a SWB chassis. Its got a running 307 with a 3 speed.
Its almost the same color!! Here's some pics of the truck...
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 02-27-2005 at 04:43 PM. |
02-28-2005, 07:17 PM | #134 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
hey 67_c-30 that is a great find.....the truck looks to be in pretty good shape! so the plans are to tub the bed or do fender ext. on the bed ? sorta like the green one you posted in a set of earlier pictures. it has the black dually fenders on it or the red one as well .....also did you say you were going to turn the rest of the truck into a shorty!..... sounds like you have some rather big plans....it will be alot of work but it will be cool when done! keep us posted!
__________________
1972 GMC Sierra Grande |
02-28-2005, 08:00 PM | #135 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
I am going with am '81 14 bolt rearend which will is wider than the original Eaton rearend, and it will require fender extensions. I am going to shorten the wheelbase. It will look a lot like the white one below, except it will be a small window cab, and '67 front clip. It is going to be black on black w/ a chrome grille, headlight bezels, vent windows, windshield trim, hood trim, and tailgate trim. It will basically look like a cross between the white and black truck below. It will have the fender extensions but will basically look like the black truck. I want it to look a factory dually if they had built them in '67. I am not going to go with roll pans and I am not shaving anything door handles or anything. It is going to a lot of work, but it will definitely be well worth it if it looks half as good as I'm visualizing it.
Here's another easy way to visualize the look I want. Imagine Joesjunk's black C-30 below with the painted part of grille black instead of grey, no side markers, and with a bed like the white one, and different rims. What are some your thoughts on this look? I'm pretty much decided on how its going to be, but I would like from you guys. Thanks!!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 05-14-2006 at 01:45 AM. |
03-01-2005, 03:46 AM | #136 |
Senior Member
Join Date: May 2001
Location: Independence MO.
Posts: 7,698
|
Sounds like you do have big plans!! I would like to figure out the best way to make a dually bed look factory. I would like to build a stock 133"wb dually with a correct looking longhorn bed. Keep us posted on your progress and good luck.
__________________
72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale |
03-01-2005, 10:37 AM | #137 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Joe,
Going with a Lornhorn bed was my initial plan, but I only know of one anywhere near me, and its trashed. I had pretty much decided a few months back that I would shorten the frame to 127" and use a std 8' bed, and when I found the '69 C-10 in the posts above this, it made up my mind for me. Its rare to find a bed around here that solid and straight. These trucks are normally pretty used up, especially the LWB ones. What do you have in mind to make the fender extensions look factory?? The bed on the truck below looks more authentic than any of the others I have seen. I don't know if its the color or what, but the wheel offset looks good, and it all flows. That is the look I'm going to try to achieve. What do you think??
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 05-14-2006 at 01:44 AM. |
03-01-2005, 12:39 PM | #138 |
Registered User
Join Date: Feb 2004
Location: Fenelon Falls, ON Canada
Posts: 1,455
|
The truck above is virtually what mine is going to look like in a couple of months I hope. Almost there now, except for the box being completed.
|
03-01-2005, 05:42 PM | #139 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
67_c-30 i don't see how you could miss with the look you are going after. all these examples are great trucks. the only thing i would do different would be to keep the side markers. i like the look on joes black one, plus just the safety aspect as well. this is just an opinion though. it should be a nice truck!the only thing else i can say is man you better get started! 68gmcdually your truck looks to be coming along nicely as well. i hope to see both as a post here this summer. keep up the great work guys!
__________________
1972 GMC Sierra Grande |
03-01-2005, 07:25 PM | #140 | |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Quote:
Well, the reason I'm not going with the side markers is I'm keeping eveything like a '67 came. I would actually have to add them to my '67 fenders or get a set of '68 fenders. And the fact that they look cleaner without them to me, but its like you, its different opinions. 68gmcdually, Wow! Nice project you got going there. I prefer to have the look of reg cab on my truck, but the extended and 4 door cabs are different, and they catch your attention. What kind of bed and what color are planning to go with?? Also, what engine/drivetrain are going to run?? I can't wait to see it when your finished. Keep us posted!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
|
03-01-2005, 08:03 PM | #141 |
Registered User
Join Date: Feb 2004
Location: Fenelon Falls, ON Canada
Posts: 1,455
|
The truck is going inferno red pearl metallic, a very nice rich red. The drivetrain is going to be a 1992 3500 chassis, sporting a 5.7l with a 5 speed (overdirve) manual transmission. I removed the original dual rear end and put one in out of a cube van to get a better ratio and to widen it out a bit as the original rear end was very narrow.
I kinda like the regular cab as well, but as you can tell from my signature I am getting married in the spring and hopefully with luck will have couple of kids coming to the shows and cruises with me, hence the need for a back seat. Some of my best memories from my childhood was from the back seat of my dad's custom built extended ramp truck, we toured all of the eastern sea board in that rig, picking up classic cars for our business. |
03-01-2005, 08:08 PM | #142 |
Registered User
Join Date: Feb 2004
Location: Fenelon Falls, ON Canada
Posts: 1,455
|
67 c-30
I see that you are from Alabama.
We broke down in Alabama one year in my dad's hauler. There was a pretty big flood and the truck died out from the water splashing up on the ignition. That was fun, fully loaded with two cars and my mom dad, brother # 2 and me, waiting for the stupid truck to dry out. Oh the memories, that it the type of stuff I want my kids to remember. BTW: in the background of my second picture above is my dads new hauler, a '52 IHC super-stretch cab over mounted on a low pro IHC chassis with a DT466 power plant with a 5 speed tranny coupled to a 3 speed aux. My truck and his truck are going to be close in colour. I hope to hit some of the larger truck shows "down south" (hey from Canada everything is south to us) with mine on the back and his doing the hauling with our friends '60 on the wagon. Also that is his first load on the truck a '57 chev belair, just being stored while the truck is being finished. Last edited by 68gmcdually; 03-01-2005 at 08:14 PM. |
03-01-2005, 10:38 PM | #143 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Very cool. I was going to put my '67 on the '81 chassis that front suspension and rearend is coming from, but either way I went I was going to have to shorten the frame to achieve the WB I needed. I figured since the cab mounts were all there that it would ultimately be easier to leave my it on the '67 frame and shorten it 6 inches. I going with 6.2 diesel (probably gonna be turbocharged), the original SM420 4 speed, and a 3.42 geared 14 bolt out of the '81. I had an '85 C-30 years ago with the 6.2L/SM465/3.73 gears and I always remembered how good that truck ran, and the awesome mileage it got. It had a 10ft flatbed and got around 20 MPG. It would run 75-80 fine out on the highway, and low first gear of the 4 speed was great when pulling heavy loads. . The 6.2L runs much better with a manual transmission. Not a lot of people know that b/c most of them came autos.
I can relate to having fond memories of an old ramp truck. My dad had one that he used to haul his dirt cars to the races in the late 70's and early 80's. It was a '71 C-30, and looked a lot like mine (below). I actually thought when I first found my truck that it might be the same one, but after a closer look I found it wasn't. Several of the guys I deal with razz my a little bit because they all have rollbacks, but I love my old truck. I'd like to build a 67-72 Rollback eventually. I thought I might do you did and find a newer rollback that may have a rusty body or even a little collision damage, and replace the cab with an older one.
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
03-01-2005, 10:48 PM | #144 |
Registered User
Join Date: Dec 2002
Location: Hills of Western Mass
Posts: 626
|
I know it is a little late but here is mine. Don't stop by this forum much since it started but will more now, some nice pics on here.
__________________
86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club! |
03-02-2005, 12:52 AM | #145 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Wow! Great looking '67. I have a set of those mirrors that I took off of an 84 C-20. They look pretty good on there. I may use them on my car hauler. Sometimes if I have something pretty wide on the back of the truck, while I'm pulling the trailor, I can't well with the mirrors I have. As far as they swing out, they might do the trick. Also, are those cab lights original? Are they listed on the glove box tag, or are they aftermarket? Thanks!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 03-02-2005 at 12:54 AM. |
03-02-2005, 03:49 AM | #146 |
Senior Member
Join Date: May 2001
Location: Independence MO.
Posts: 7,698
|
I really like the look of the green and white one. There is a local truck that has the dually fenders from a 88-98 truck moulded to the 72 bed and it looks real good. I am not to sure what way i would go????
__________________
72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale |
03-02-2005, 10:23 AM | #147 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Joe,
The 88-98 fenders look ok to me, but I don't like that wheelwells are so differently shaped. There are some good looking trucks like that on the thread, but for mine I want to go with the modified stepside fenders. I found a few more 1 tons (below). That is a really clean motorhome. Here are more pics of it: http://www.imagestation.com/album/pi...25&mode=invite The wrecker is for sale on Ebay. Those 19.5" wheels look pretty tough on there. Looks like an earlier model 3500HD. C-30HD I guess! Here's the link to auction: http://cgi.ebay.com/ebaymotors/ws/eB...&category=6173
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
03-02-2005, 07:36 PM | #148 |
Registered User
Join Date: Jun 2004
Location: Rockville Va.
Posts: 260
|
man 86SILVERADO that is a nice one! i am real glad to see you post that one. that picture is a nice one as well. it would look right at home just like that with the back full of crate peaches don't you think? i think it would make a nice matted picture like that for sure! sorta like the ones you would see in a magazine......as always thanks for the new pictures 67_c-30. that bright yellow wrecker looks ready for duty! the gmc camper conversion looks almost new. thanks guys!
__________________
1972 GMC Sierra Grande |
03-02-2005, 10:20 PM | #149 | |
Registered User
Join Date: Dec 2002
Location: Hills of Western Mass
Posts: 626
|
Quote:
Don't get too many compliments on it. Don't think it is flashy enough for alot of the folks on here but it doesn't matter to me. it gets driven and WORKED almost every day. The Cab lights are the teardrop style which are correct for the 67 (Saw your other post) but they are not factory installed. Thanks also for the Compliment 7GMC2. Thanks also for starting this thread. The truck has those sideboards for a reason and it does feel right at home hauling stonedust, crushed stone,processed, flagstone, riprap, you name it. I will try to remember to take some pics this year. I just don't really think to jump out at the gravel pit and take snapshots while I am working 80 hours a week during the season. I did have a few cords of ash hickory and oak in it with my JD 855 in tow a couple months back. She gets a little respite during the winter and I take care of a few new rust spots every year. It is a never ending battle up here.
__________________
86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club! |
|
03-03-2005, 12:18 AM | #150 | |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Quote:
Every now and then and get a compliment on my '69 Car Hauler, but I usually get "I figgered you'da got a rollback by now!" Most of the guys I deal with around here have Rollbacks, and I've seen popped rollers, hydraulic pumps and cylinders fail and/or pour hyd. oil, and I've seen worn out beds that bounce around when they hit bumps. I've also seen aluminum body rollbacks with the bed ripped to shreds and the catches on the front crunched because they brought the bed all the way to cab without having it all the way down. I've had to put a rearend and gas in mine, so who really has the inferior truck? Don't get me wrong, I know Rollbacks have a lot of advantages, but even when I buy or build one, I am going to keep this truck around to do all the nasty stuff like pulling junk cars w/ no wheels or spindles and using to push stuff out of the way with the rear "bumper". This truck has 4" channel iron extending off of the frame going to a 4" piece of 1/2" wall tubing with a 3/16" plate deck. The bed is built like a tank! Do that with a Rollback!!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
|
Bookmarks |
|
|