KS 2nd thread of bunch of parts - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-17-2010, 10:41 AM

jmedero, sorry none of that right now
kacz81, I'll pm you info
Thanks Randy

ironhill · 01-17-2010, 11:13 AM

I'm looking for a automatic shift indicator pointer for a 67 68 that mates up with the little metal indicator lense not the bigger plastic ones like on the 71 72's. Thanks

teeitup · 01-17-2010, 01:01 PM

I think all I have are the 69-up ones, no 67-68's, sorry. Thanks Randy

kacz81 · 01-17-2010, 02:15 PM

payment sent

ShortStepper · 01-17-2010, 03:30 PM

Randy:
How much for the pass exterior door handle for my 68 sent to 39042?
Thanks,
Terry

yellowGT · 01-18-2010, 01:22 PM

Randy sorry I took so long to reply but I will take what I have asked for. I also would like to know if you have the part that goes on the front part of 67-68 hoods that has a pin which goes into the hood latch. Oh and auto trans linkage too. How much more?

Let me know paypal info. I dont think I saved it.

67gmcstepside · 01-18-2010, 03:54 PM

Randy, need the following for a 67"
5505 bell housing
grill support
grill extension
1 dual headlight surround
fan shroud
This is just a start.
thanks Don

teeitup · 01-18-2010, 04:55 PM

kacz81, I'll get them mailed out this week
Shortstepper, Terry, I have some out there, I'll get pic of best one $13 shipped
yellowgt, your needing 67-68 headlight buckets aren't you, sorry the only ones I have are 69-72. I have complete AT linkages. I have the other parts yours needing, headlight switch and knob, and glove box door hinge I don't have the hood piece right now. $50 shipped for all these parts I have
67gmcstepside, sorry I don't have any of that stuff right now
Thanks Randy

ShortStepper · 01-19-2010, 09:08 AM

Randy:

Give me your mailing address and I will send you the $13. I don't need a photo, just send me the best you have.

Thanks,

Terry

ShortStepper · 01-19-2010, 10:59 PM

Randy:

Your payment will be in the mail in the morning.

Thanks,

Terry

Tod Maznec · 01-20-2010, 06:23 PM

1971 C10 with a 350 ci sbc motor:

I need 4 radiator brackets for a 4 core radiator. I see your picture you have a pile of these, but they need to be WIDE ones for the 4 core. The top brackets are wide and 3-1/2" long reach.

Any idea what mods I need to make on the stock 305 fan shroud?

Shipping to zip 03820 in NH. Send price of bttm and top brackets with shipping if you have these wide long ones.

teeitup · 01-21-2010, 12:32 PM

Shortstepper, I'll let you know when I recieve it, Thanks
Tod, I have a complete set of uppers and lowers, rubbers have some wear, they all do. $27 shipped. On the shroud the only thing you may need is the lower clips, some have small clips some have bigger clips, I have the bigger ones for $8 a pair. Thanks Randy

**aboveall** · 01-21-2010, 01:47 PM

how much for the center dash with radio heater controlls i need center restoring my 69 the other owner cut radio spot out for pull out radio whant to make it originall ij that spot again

Tod Maznec · 01-21-2010, 02:19 PM

To Tee it up:
So this set is the long reach wide style for the big 4 core radiators? Your price seems good if so.

teeitup · 01-21-2010, 02:34 PM

aboveall, are you needing one with AC?
Tod, yes 4 core holders, I know exactly which ones your talking about. I can get pics in awhile
Thanks Randy

Tod Maznec · 01-21-2010, 02:40 PM

Tee it up-
I dont have ac if that last thread comment was to me- Otherwise post a picture when convenient. Post a paypal screen name I send to also.

BigRed Beast · 01-21-2010, 02:54 PM

Do you still have any driver and passenger mirror sets? Condition? Shipped to 80138?

Thanks...

teeitup · 01-21-2010, 05:11 PM

Tod here is a pic, About the AC I was talking to the other member
Big Red, I'll beack over there in awhile I'm not sure what is out there
Thanks Randy

kacz81 · 01-21-2010, 05:46 PM

Wipers received thanks again randy

Tod Maznec · 01-21-2010, 06:46 PM

Teeitup Randy-

Tod here: I will take the brackets and inserts for the $27 shipped. I need a paypal name to post to. PM me I guess to complete the sale with my mailing address. tequalsfr@comcast.net

**aboveall** · 01-22-2010, 01:31 PM

no ac

teeitup · 01-22-2010, 01:47 PM

I've got one out of a 68, same thing, $20 plus shipping. Thanks Randy

Tod Maznec · 01-22-2010, 01:59 PM

Randy - you seem to just have about everything! hahaha

68fixeruper · 01-25-2010, 08:32 PM

on 916 how much for a complete set of your auto transmission linkage in your stash

teeitup · 01-25-2010, 10:00 PM

Tod, always need more, lol
68fixerupper, $40 shipped for a complete AT linkage setup.
Thanks Randy

01-17-2010, 10:41 AM	#151
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts jmedero, sorry none of that right now kacz81, I'll pm you info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2010, 11:13 AM	#152
ironhill Registered User Join Date: Jan 2009 Location: Great Falls, MT Posts: 335	Re: 2nd thread of bunch of parts I'm looking for a automatic shift indicator pointer for a 67 68 that mates up with the little metal indicator lense not the bigger plastic ones like on the 71 72's. Thanks

01-17-2010, 01:01 PM	#153
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts I think all I have are the 69-up ones, no 67-68's, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2010, 02:15 PM	#154
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: 2nd thread of bunch of parts payment sent

01-17-2010, 03:30 PM	#155
ShortStepper Registered User Join Date: May 2009 Location: Brandon, MS Posts: 25	Re: 2nd thread of bunch of parts Randy: How much for the pass exterior door handle for my 68 sent to 39042? Thanks, Terry

01-18-2010, 01:22 PM	#156
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 2nd thread of bunch of parts Randy sorry I took so long to reply but I will take what I have asked for. I also would like to know if you have the part that goes on the front part of 67-68 hoods that has a pin which goes into the hood latch. Oh and auto trans linkage too. How much more? Let me know paypal info. I dont think I saved it. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3 Last edited by yellowGT; 01-18-2010 at 01:22 PM.

01-18-2010, 03:54 PM	#157
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: 2nd thread of bunch of parts Randy, need the following for a 67" 5505 bell housing grill support grill extension 1 dual headlight surround fan shroud This is just a start. thanks Don

01-18-2010, 04:55 PM	#158
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts kacz81, I'll get them mailed out this week Shortstepper, Terry, I have some out there, I'll get pic of best one $13 shipped yellowgt, your needing 67-68 headlight buckets aren't you, sorry the only ones I have are 69-72. I have complete AT linkages. I have the other parts yours needing, headlight switch and knob, and glove box door hinge I don't have the hood piece right now. $50 shipped for all these parts I have 67gmcstepside, sorry I don't have any of that stuff right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-18-2010 at 04:57 PM.

01-19-2010, 09:08 AM	#159
ShortStepper Registered User Join Date: May 2009 Location: Brandon, MS Posts: 25	Re: 2nd thread of bunch of parts Randy: Give me your mailing address and I will send you the $13. I don't need a photo, just send me the best you have. Thanks, Terry

01-19-2010, 10:59 PM	#160
ShortStepper Registered User Join Date: May 2009 Location: Brandon, MS Posts: 25	Re: 2nd thread of bunch of parts Randy: Your payment will be in the mail in the morning. Thanks, Terry

01-20-2010, 06:23 PM	#161
Tod Maznec Registered User Join Date: Dec 2009 Location: Dover, NH Posts: 33	Re: 2nd thread of bunch of parts 1971 C10 with a 350 ci sbc motor: I need 4 radiator brackets for a 4 core radiator. I see your picture you have a pile of these, but they need to be WIDE ones for the 4 core. The top brackets are wide and 3-1/2" long reach. Any idea what mods I need to make on the stock 305 fan shroud? Shipping to zip 03820 in NH. Send price of bttm and top brackets with shipping if you have these wide long ones.

01-21-2010, 12:32 PM	#162
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Shortstepper, I'll let you know when I recieve it, Thanks Tod, I have a complete set of uppers and lowers, rubbers have some wear, they all do. $27 shipped. On the shroud the only thing you may need is the lower clips, some have small clips some have bigger clips, I have the bigger ones for $8 a pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2010, 01:47 PM	#163
aboveall Junior Member Join Date: Oct 2002 Location: calverton NY Posts: 58	Re: 2nd thread of bunch of parts how much for the center dash with radio heater controlls i need center restoring my 69 the other owner cut radio spot out for pull out radio whant to make it originall ij that spot again

01-21-2010, 02:19 PM	#164
Tod Maznec Registered User Join Date: Dec 2009 Location: Dover, NH Posts: 33	Re: 2nd thread of bunch of parts To Tee it up: So this set is the long reach wide style for the big 4 core radiators? Your price seems good if so.

01-21-2010, 02:34 PM	#165
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts aboveall, are you needing one with AC? Tod, yes 4 core holders, I know exactly which ones your talking about. I can get pics in awhile Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

01-21-2010, 02:40 PM	#166
Tod Maznec Registered User Join Date: Dec 2009 Location: Dover, NH Posts: 33	Re: rad holders Tee it up- I dont have ac if that last thread comment was to me- Otherwise post a picture when convenient. Post a paypal screen name I send to also.

01-21-2010, 02:54 PM	#167
BigRed Beast Registered User Join Date: Aug 2007 Location: Parker, CO Posts: 140	Re: 2nd thread of bunch of parts Do you still have any driver and passenger mirror sets? Condition? Shipped to 80138? Thanks... __________________ Big Red Beast 1972 Blazer CST AC/Auto/4x4 "Project" 1997 F 350 CC Powerstroke "The Great White"

01-21-2010, 05:11 PM	#168
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Tod here is a pic, About the AC I was talking to the other member Big Red, I'll beack over there in awhile I'm not sure what is out there Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2010, 05:46 PM	#169
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: 2nd thread of bunch of parts Wipers received thanks again randy

01-21-2010, 06:46 PM	#170
Tod Maznec Registered User Join Date: Dec 2009 Location: Dover, NH Posts: 33	Re: 2nd thread of bunch of parts Teeitup Randy- Tod here: I will take the brackets and inserts for the $27 shipped. I need a paypal name to post to. PM me I guess to complete the sale with my mailing address. tequalsfr@comcast.net

01-22-2010, 01:31 PM	#171
aboveall Junior Member Join Date: Oct 2002 Location: calverton NY Posts: 58	Re: 2nd thread of bunch of parts no ac

01-22-2010, 01:47 PM	#172
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts I've got one out of a 68, same thing, $20 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2010, 01:59 PM	#173
Tod Maznec Registered User Join Date: Dec 2009 Location: Dover, NH Posts: 33	Re: 2nd thread of bunch of parts Randy - you seem to just have about everything! hahaha

01-25-2010, 08:32 PM	#174
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: 2nd thread of bunch of parts on 916 how much for a complete set of your auto transmission linkage in your stash Last edited by 68fixeruper; 01-25-2010 at 08:41 PM.

01-25-2010, 10:00 PM	#175
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 2nd thread of bunch of parts Tod, always need more, lol 68fixerupper, $40 shipped for a complete AT linkage setup. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.