The Boss 72 Chevy 4x4 Cummins Dually - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrBeast · 03-26-2011, 01:28 AM

Quote:

Originally Posted by Maxxd07

Wow, nice work. I cant believe I missed the "rebirth" of this thread. Running and driving by next weekend?

I wish! But I am hoping in a month or so to have it up and running. not driving, but at a point where I can lite it off and make diesel noises.

MrBeast · 03-26-2011, 01:33 AM

Oh and if you havent yet, subscribe to my you tube channel!

MrBeast · 03-26-2011, 01:35 AM

Quote:

Originally Posted by watahyahknow

are you still planning on a doghouse behind the cab , you where mentioning it when it was still a gasolinepowered 2 wheeldrive

btw someone told me Little shop of Horror is building some 10 lug 8,5 adapters on their facebook page!
might be worth investigating

I am going to build a dog house, but it will be portable, I am going to set it up so it can plug into an accessory plug on the bed, and that will power a gage that tells me how warm/cold it is inside, I will be able to reach through the vent window and open or close his vent.

Doing a flat bed now instead of the western hauler bed it had.

watahyahknow · 03-26-2011, 11:34 AM

the truck is sitting high enough .... you might allso make the doghouse like a toolbox hanging under the flatbed between the cab and rearwheels , would make it eazier for the dog to get in it as whell .
doing it this way you can put a smal toiletblower type device behind the seat with a pipe to the box to suck the cooled or warmed air out of the cab intoo the dogbox and rufly keep the temperature in the box the same as the cab
just dont drive trough deep water

MrBeast · 03-26-2011, 12:27 PM

Quote:

Originally Posted by watahyahknow

the truck is sitting high enough .... you might allso make the doghouse like a toolbox hanging under the flatbed between the cab and rearwheels , would make it eazier for the dog to get in it as whell .
doing it this way you can put a smal toiletblower type device behind the seat with a pipe to the box to suck the cooled or warmed air out of the cab intoo the dogbox and rufly keep the temperature in the box the same as the cab
just dont drive trough deep water

I am just going to insulate the box well, have the vent setup, and I am probably going to build it out of aluminum.

It is going to have to be fairly large because my dog aint exactly small.

I am only going to use the doghouse on long trips, on short trips I will have him ride up front with me.

Loading him is not a problem, I have him trained to put his front paws up and I will lift up his back legs to get him in, easy on his hips and easy on my back.

Have I mentioned German Shepherds are just awesome dogs?

thirdstreettito · 03-26-2011, 01:41 PM

Why is your YouTube channel called "RichardsMetalWorks?" Are you working for Richard now? Or did you two join together?

MrBeast · 03-26-2011, 02:08 PM

Quote:

Originally Posted by thirdstreettito

Why is your YouTube channel called "RichardsMetalWorks?" Are you working for Richard now? Or did you two join together?

Richard was working for me for a while, he decided he wanted to go back to Houston though, he is living there now. I cant say I blame him, I am ready to get out of this town, have to wait till I graduate though.

thirdstreettito · 03-26-2011, 02:10 PM

Ah ok, how is the murdered out 3500HD doing in your hands? Working hard or hardly working?

MrBeast · 03-26-2011, 02:12 PM

Quote:

Originally Posted by thirdstreettito

Ah ok, how is the murdered out 3500HD doing in your hands? Working hard or hardly working?

Impounded 24 cars in 3 days over spring break. I have been working the snot out of it.

thirdstreettito · 03-26-2011, 02:19 PM

NICE! Glad she's earning her keep! We need pics of her!

MrBeast · 03-26-2011, 02:34 PM

Quote:

Originally Posted by thirdstreettito

NICE! Glad she's earning her keep! We need pics of her!

I wont be posting any because the truck has my address and phone number plastered all over the side of it.

thirdstreettito · 03-26-2011, 02:55 PM

It's good advertising though isn't it?

MrBeast · 03-26-2011, 03:05 PM

Quote:

Originally Posted by thirdstreettito

It's good advertising though isn't it?

no, advertising online for what I do doesnt really work, more so I dont like anyone who doesnt need it having my address for obvious reasons.

And I dont need to be getting into an arguement online with some one then having them calling my business and harassing me or something.

thirdstreettito · 03-26-2011, 04:21 PM

Good point.

MrBeast · 03-26-2011, 04:48 PM

Just a small update, I found and ordered some emblems for the truck.

Putting these on the front fenders where the 8-396 emblems would go:

Putting these on the fender in the appropriate position:

This is the color I have decided on.

I think its going to look pretty damn sharp!

watahyahknow · 03-26-2011, 05:19 PM

looks a lot like the 2001 prowler orange ..... wish is my favorite

MrBeast · 03-26-2011, 05:22 PM

Updated flat bed rendering:

MrBeast · 03-26-2011, 05:27 PM

Quote:

Originally Posted by watahyahknow

looks a lot like the 2001 prowler orange ..... wish is my favorite

There is a 2011 caliber parked at the HEB over here, I was bad, I wrote down thier vin so I could find out the paint code.

thirdstreettito · 03-26-2011, 06:54 PM

Nice rendering, emblems, and paint choice. Where did you get the Cummins emblem?

MrBeast · 03-26-2011, 07:28 PM

Quote:

Originally Posted by thirdstreettito

Nice rendering, emblems, and paint choice. Where did you get the Cummins emblem?

Found it on Amazon.com of all places.

MrBeast · 03-26-2011, 08:31 PM

Got the front clip on!

Here is the video:

http://www.youtube.com/watch?v=1mx-7DuJdRY

thirdstreettito · 03-27-2011, 12:40 AM

Oh my God. Shibby! Glad it's in. I'm with you on the Visor, ew. And the hood...

I didn't know you bought the calico truck from Richard, too bad he didn't finish it.

Also, the website in the video isn't up, didn't know if you knew or not.

MrBeast · 03-27-2011, 02:00 AM

Quote:

Originally Posted by thirdstreettito

Oh my God. Shibby! Glad it's in. I'm with you on the Visor, ew. And the hood...

I didn't know you bought the calico truck from Richard, too bad he didn't finish it.

Also, the website in the video isn't up, didn't know if you knew or not.

I am still building the website, just bought the domain yesterday.

**Palf70Step** · 03-27-2011, 08:33 AM

Nick, Title change will show on all future replies.

MrBeast · 03-27-2011, 11:02 AM

Quote:

Originally Posted by Palf70Step

Nick, Title change will show on all future replies.

Thank you sir, greatly appriciated.

03-26-2011, 01:33 AM	#177
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Oh and if you havent yet, subscribe to my you tube channel! __________________ "He used to be a pretty nice feller, now he's a welder!"

03-26-2011, 11:34 AM	#179
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: The Boss Hoss, 72 C/30, 454, DUALLY! the truck is sitting high enough .... you might allso make the doghouse like a toolbox hanging under the flatbed between the cab and rearwheels , would make it eazier for the dog to get in it as whell . doing it this way you can put a smal toiletblower type device behind the seat with a pipe to the box to suck the cooled or warmed air out of the cab intoo the dogbox and rufly keep the temperature in the box the same as the cab just dont drive trough deep water __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-26-2011, 01:41 PM	#181
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Why is your YouTube channel called "RichardsMetalWorks?" Are you working for Richard now? Or did you two join together? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-26-2011, 02:10 PM	#183
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Ah ok, how is the murdered out 3500HD doing in your hands? Working hard or hardly working? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-26-2011, 02:19 PM	#185
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! NICE! Glad she's earning her keep! We need pics of her! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-26-2011, 02:55 PM	#187
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! It's good advertising though isn't it? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-26-2011, 04:21 PM	#189
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Good point. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-26-2011, 04:48 PM	#190
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Just a small update, I found and ordered some emblems for the truck. Putting these on the front fenders where the 8-396 emblems would go: Putting these on the fender in the appropriate position: This is the color I have decided on. I think its going to look pretty damn sharp! __________________ "He used to be a pretty nice feller, now he's a welder!"

03-26-2011, 05:19 PM	#191
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: The Boss Hoss, 72 C/30, 454, DUALLY! looks a lot like the 2001 prowler orange ..... wish is my favorite __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-26-2011, 05:22 PM	#192
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Updated flat bed rendering: __________________ "He used to be a pretty nice feller, now he's a welder!"

03-26-2011, 06:54 PM	#194
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Nice rendering, emblems, and paint choice. Where did you get the Cummins emblem? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-27-2011, 12:40 AM	#197
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: The Boss Hoss, 72 C/30, 454, DUALLY! Oh my God. Shibby! Glad it's in. I'm with you on the Visor, ew. And the hood... I didn't know you bought the calico truck from Richard, too bad he didn't finish it. Also, the website in the video isn't up, didn't know if you knew or not. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-27-2011, 08:33 AM	#199
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,754	Re: The Boss 72 Chevy 4x4 Cummins Dually Nick, Title change will show on all future replies. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.