AZ Cab & frame cuts 67 2 wheel drive - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 03-06-2019, 10:20 PM

67rat Rear cab Mount is ok, left floor support is ok, right side is rusted out $50+ shipping

Smmf $35 ea on frame horns + shipping

Kcmoto I have that on another cab in good shape, $50 for as much as need + shipping

Michael $45 ea + shipping on those
Hope I got everybody

Thanks
Tom

67 Blue Truck · 03-06-2019, 10:32 PM

Did you get my pictures through email?

Thanks,
Joel

kxmotox247 · 03-06-2019, 10:54 PM

Sounds good. Does the top half of that section physically match the bottom? If it's the same shape/contour it may be a lot easier to cut out since there is no floor or floor brackets in the way.
I'll measure tomorrow morning for how much I need.

**t korinek** · 03-07-2019, 12:08 AM

Kxmoto I believe it does , here’s a pic of what I have on that particular cab right now, not sure if there’s enough on that cab or not? If not I have another one I can hack up��

Blue truck I have those pieces $45 ea + shipping

kxmotox247 · 03-07-2019, 12:11 AM

I don't see much left on that one. I guess the center rib is still there. Did you say you have another cab with that area?

kxmotox247 · 03-07-2019, 12:16 AM

I'm wondering if the opposite end can be used to patch in the bottom. I think the shape is the same. So maybe off another cab?

projectking · 03-07-2019, 12:20 PM

Quote:

Originally Posted by kxmotox247

I'm wondering if the opposite end can be used to patch in the bottom. I think the shape is the same. So maybe off another cab?

I believe it does minus the bend at the bottom

**michael bustamante** · 03-07-2019, 01:11 PM

can I get pics of those floor patches?

**t korinek** · 03-07-2019, 01:49 PM

The other cab back

Michael floor pans are rusty

kxmotox247 · 03-08-2019, 12:04 AM

Quote:

Originally Posted by t korinek

The other cab back

So how do we work out getting a few pieces from that cab back? I need to be able to repair 5 of the vertical strips. I'm thinking around 12-16" tall and then I can cut to fit once I have them in my hands? Maybe three sections out of the top or the bottom if they are the same. Two sections is fine also. Whatever ships the easiest.

DarkKnightWong · 03-08-2019, 03:13 PM

Hi Sir

Not sure if you saw my last post...

Just a bump :-)

Quote:

Originally Posted by DarkKnightWong

Hi

How is that Bracket I have circled?

Price to GA 30338

Thanks
Allen

**t korinek** · 03-08-2019, 04:58 PM

Darknight $25 shipped

**Getter-Done** · 03-08-2019, 10:28 PM

I received my parts Today.
Those will help so much.
Thank you so much for
the Great communication also.

davreich · 03-11-2019, 06:27 PM

Hi,
How much for the front sway bar and mounts? Also, are trailing arms in great shape? If so how much. Shipping to 37807 Thanks, Dave

**t korinek** · 03-11-2019, 10:24 PM

$75+ shipping for the sway bar & brackets + shipping.
These trailing arms are no good, I probably do have a good set $150 + shipping

**t korinek** · 03-12-2019, 11:27 AM

Pics for d passmore

**D.PASSMORE** · 03-12-2019, 11:47 AM

Ok Tom, hit you tomorrow morning with payment. I'll include shipping address in the notes in payment transaction. Thanks D/

davreich · 03-13-2019, 02:47 PM

Hi Tom,
I'll take the front sway bar and mounts for now. I will PM my email address. PayPal?? Thanks

davreich · 03-15-2019, 10:05 PM

Hi,
Did you get my PM?

SVFK5 · 03-16-2019, 09:18 AM

I'll take the entire driver's side frame rail, if it isn't cracked or damaged? Cost with shipping to 49544?

SVFK5 · 03-16-2019, 09:24 AM

Sorry I didn't realize this was a C10, looking for Blazer/Jimmy. Please disregard

KMC3420 · 03-24-2019, 11:27 PM

Any luck in finding a passenger side front fender cup? Thanks.

**t korinek** · 03-25-2019, 12:47 AM

Here’s the pics

KMC3420 · 03-25-2019, 09:40 AM

I will take it. PM me some payment info and total, thanks.

kiwikid · 04-05-2019, 11:15 PM

i need some roof cuts with good drip rails would you have ? thanks

03-06-2019, 10:20 PM	#26
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive 67rat Rear cab Mount is ok, left floor support is ok, right side is rusted out $50+ shipping Smmf $35 ea on frame horns + shipping Kcmoto I have that on another cab in good shape, $50 for as much as need + shipping Michael $45 ea + shipping on those Hope I got everybody Thanks Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-06-2019, 10:32 PM	#27
67 Blue Truck Registered User Join Date: Jan 2019 Location: Madison, AL Posts: 41	Re: Cab & frame cuts 67 2 wheel drive Did you get my pictures through email? Thanks, Joel

03-06-2019, 10:54 PM	#28
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,396	Re: Cab & frame cuts 67 2 wheel drive Sounds good. Does the top half of that section physically match the bottom? If it's the same shape/contour it may be a lot easier to cut out since there is no floor or floor brackets in the way. I'll measure tomorrow morning for how much I need. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

03-07-2019, 12:08 AM	#29
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive Kxmoto I believe it does , here’s a pic of what I have on that particular cab right now, not sure if there’s enough on that cab or not? If not I have another one I can hack up�� Blue truck I have those pieces $45 ea + shipping Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-07-2019, 12:11 AM	#30
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,396	Re: Cab & frame cuts 67 2 wheel drive I don't see much left on that one. I guess the center rib is still there. Did you say you have another cab with that area? __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

03-07-2019, 12:16 AM	#31
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,396	Re: Cab & frame cuts 67 2 wheel drive I'm wondering if the opposite end can be used to patch in the bottom. I think the shape is the same. So maybe off another cab? Attached Images __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

03-07-2019, 01:11 PM	#33
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: Cab & frame cuts 67 2 wheel drive can I get pics of those floor patches? __________________ 1967custom

03-07-2019, 01:49 PM	#34
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive The other cab back Michael floor pans are rusty Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 03-07-2019 at 01:56 PM.

03-08-2019, 04:58 PM	#37
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive Darknight $25 shipped Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-08-2019, 10:28 PM	#38
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,724	Re: Cab & frame cuts 67 2 wheel drive I received my parts Today. Those will help so much. Thank you so much for the Great communication also. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-11-2019, 06:27 PM	#39
davreich Registered User Join Date: Dec 2014 Location: Maynardville, TN Posts: 4	Re: Cab & frame cuts 67 2 wheel drive Hi, How much for the front sway bar and mounts? Also, are trailing arms in great shape? If so how much. Shipping to 37807 Thanks, Dave

03-11-2019, 10:24 PM	#40
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive $75+ shipping for the sway bar & brackets + shipping. These trailing arms are no good, I probably do have a good set $150 + shipping __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-12-2019, 11:27 AM	#41
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive Pics for d passmore Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-12-2019, 11:47 AM	#42
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: Cab & frame cuts 67 2 wheel drive Ok Tom, hit you tomorrow morning with payment. I'll include shipping address in the notes in payment transaction. Thanks D/ __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

03-13-2019, 02:47 PM	#43
davreich Registered User Join Date: Dec 2014 Location: Maynardville, TN Posts: 4	Re: Cab & frame cuts 67 2 wheel drive Hi Tom, I'll take the front sway bar and mounts for now. I will PM my email address. PayPal?? Thanks



Register or Log In To remove these advertisements.

03-15-2019, 10:05 PM	#44
davreich Registered User Join Date: Dec 2014 Location: Maynardville, TN Posts: 4	Re: Cab & frame cuts 67 2 wheel drive Hi, Did you get my PM?

03-16-2019, 09:18 AM	#45
SVFK5 Registered User Join Date: Mar 2019 Location: Grand Rapids Posts: 13	Re: Cab & frame cuts 67 2 wheel drive I'll take the entire driver's side frame rail, if it isn't cracked or damaged? Cost with shipping to 49544?

03-16-2019, 09:24 AM	#46
SVFK5 Registered User Join Date: Mar 2019 Location: Grand Rapids Posts: 13	Re: Cab & frame cuts 67 2 wheel drive Sorry I didn't realize this was a C10, looking for Blazer/Jimmy. Please disregard

03-24-2019, 11:27 PM	#47
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: Cab & frame cuts 67 2 wheel drive Any luck in finding a passenger side front fender cup? Thanks. __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

03-25-2019, 12:47 AM	#48
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Cab & frame cuts 67 2 wheel drive Here’s the pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-25-2019, 09:40 AM	#49
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,069	Re: Cab & frame cuts 67 2 wheel drive I will take it. PM me some payment info and total, thanks. __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

04-05-2019, 11:15 PM	#50
kiwikid Registered User Join Date: Oct 2017 Location: los angeles Ca Posts: 84	Re: Cab & frame cuts 67 2 wheel drive i need some roof cuts with good drip rails would you have ? thanks

Register or Log In To remove these advertisements.