The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 07-11-2014, 09:21 PM   #1
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Bucket seat conversion using bench seat brackets how to

I've always liked the look of factory buckets so I decided to gut the bench seat interior in favor of bucket seats. After no luck trying to track down a decent set of 1970 buckets seats $$$$, I decided to go another route by using my old 1970 bench seat brackets for the drivers seat and some old beat up bucket seats from a 73 and up truck which are cheaper and easier to find. I was pretty happy with the results.

Before & After 1970 C10

Name:  1120.jpg
Views: 6314
Size:  40.6 KB

Name:  IMG_4374.jpg
Views: 13243
Size:  51.7 KB
Name:  IMG_4401.jpg
Views: 6076
Size:  54.7 KB

Here's what I started with:
Name:  IMG_3472.jpg
Views: 5852
Size:  43.6 KB

I found a local guy who had around 10 of these 73 and up seats lying around.
Pretty sure they were out of a 1975 truck. Once the brown seat had the nasty cover off there was the little chrome square in the center.

Here is the key to making bench seat brackets work on the drivers side bucket seat. 2 simple easy to make brackets
Name:  IMG_3909.jpg
Views: 5401
Size:  27.6 KB
Beaumont@ is offline  
Old 07-11-2014, 09:45 PM   #2
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Here's what the seat frames looked liked after tear down. I doubt GM painted these back in the day judging by the amount of rust that came off of mine. I had to get new back rest springs, they had completely rusted and broke.
Name:  IMG_3508.jpg
Views: 5396
Size:  55.4 KB

and after being sandblasted and powder coated, mocked up in the truck:
Name:  IMG_3769.jpg
Views: 6213
Size:  86.5 KB

The passenger side seat brackets I just ordered from ECE (Early Classic Enterprises) They are direct bolt in.

Here's a good link for bolt hole locations:
http://67-72chevytrucks.com/vboard/s...d.php?t=516328

Restored pic after using the best parts from the 2 consoles I had.
Name:  IMG_3513.jpg
Views: 6148
Size:  36.9 KB
Beaumont@ is offline  
Old 07-11-2014, 09:47 PM   #3
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

More to follow....
Beaumont@ is offline  
Old 07-12-2014, 12:21 AM   #4
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Now for the driver' side. As you can see from the pic, the original 1970 bench seat brackets both required some light modification in order to work with the new bracket adaptors. The rear mounts were shortened and flipped "forward" and welded in place. Just use the original bench seat floor bolt holes for the driver's side seat bracket (one closest to the door) New floor holes will have to be drilled for the other bracket (closest to the console).
Name:  IMG_3779.jpg
Views: 6712
Size:  49.4 KB

Pic of what a stock 1970 bench seat bracket looks like:
Name:  69-70.jpg
Views: 5363
Size:  36.4 KB

Pretty good write up of the different types of bench seat brackets by year:
http://67-72chevytrucks.com/vboard/s....php?p=5374820

This what the bracket adaptors look like once bolted to the drivers seat:
Name:  IMG_3912.jpg
Views: 5338
Size:  46.5 KB

I had to mess around to get the right height that's what the wood blocks are for and notched the rear bench seat bracket mounts for clearance issues. I also drilled a new bolt hole on the bench seat bracket mount closest to the center console, again for clearance issues.
Name:  IMG_4363.jpg
Views: 6832
Size:  51.8 KB

and what it looks like once everything is bolted in place. 5/16 holes were drilled and tapped into the bracket adaptors:
Attachment 1276817
Attached Images
 
Beaumont@ is offline  
Old 07-12-2014, 01:31 AM   #5
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

For my seat foam I contacted a board member Tim aka "Truckseats" awesome guy to deal with. Good' ol made in the USA seat foam:
Name:  IMG_3711.jpg
Views: 5343
Size:  32.0 KB

I should have got my Truckworld seat covers from Truckseats as well but I made the mistake of going with Classic Parts of America. They assured me that they were sending Truckworld covers but they sent me PUI covers instead . Anyways after they tried to deny it I provided them a transcript of the conversation I had with the salesman when I ordered them online. So they finally agreed to take them back and send me the correct Truckworld seats covers. It took 4 months all said to finally get them but it was worth it. It also allowed me to compare both the PUI cover and Truckworld covers. Glad I held out.

PUI Covers (left side) Truckworld Covers (right side)
Name:  IMG_3621.jpg
Views: 5450
Size:  68.7 KBName:  IMG_4292.jpg
Views: 5476
Size:  85.0 KB
Name:  IMG_3629.jpg
Views: 5419
Size:  57.2 KBName:  IMG_4289.jpg
Views: 5271
Size:  55.6 KB

As far as I can tell the scrolling on the Truckworld seat cover is more crisp and they use more stitching where needed.
Beaumont@ is offline  
Old 07-12-2014, 01:36 AM   #6
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Final product, clean buckets with no hidden rust on seat frames
Name:  IMG_4369.jpg
Views: 5268
Size:  35.2 KB
Name:  IMG_4367.jpg
Views: 5409
Size:  35.8 KB
Beaumont@ is offline  
Old 07-12-2014, 01:52 AM   #7
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Bucket seat conversion using bench seat brackets how to

nice work!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline  
Old 07-12-2014, 02:00 AM   #8
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Thanks VA72C10! After this little project I understand why buckets seats and consoles bring in the prices they do.
Beaumont@ is offline  
Old 07-12-2014, 09:19 AM   #9
Lee H
Registered User
 
Lee H's Avatar
 
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,138
Re: Bucket seat conversion using bench seat brackets how to

Looks very nice.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner.

1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components.

My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703
Lee H is offline  
Old 07-13-2014, 12:25 AM   #10
1969stepside
Registered User
 
1969stepside's Avatar
 
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,176
Re: Bucket seat conversion using bench seat brackets how to

can you tell me how and where you decided to drill your holes in the floor to go from bench to buckets? did u use the existing holes on the outside and then drill where the other ones would go?
__________________
Greater love hath no man than to lay down his life for a friend.
Members i Have met
Earl Slick68
1969 Stepside Build thread
http://67-72chevytrucks.com/vboard/s...=1#post4253546
Chevy Trucks the longest lasting most dependable trucks on the road
1969stepside is offline  
Old 07-13-2014, 01:02 AM   #11
CCCC
Registered User
 
CCCC's Avatar
 
Join Date: Mar 2007
Location: San Pedro River, SE Arizona
Posts: 733
Re: Bucket seat conversion using bench seat brackets how to

Lot of planning - lot of work - well done. Looks very nice.
__________________
CCCC
67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison
Moved but still in the family
70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350
Recently sent to new homes
72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp
CCCC is offline  
Old 07-13-2014, 05:55 PM   #12
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Quote:
Originally Posted by 1969stepside View Post
can you tell me how and where you decided to drill your holes in the floor to go from bench to buckets? did u use the existing holes on the outside and then drill where the other ones would go?
It wasn't bad at all. I just used the existing driver's side bench seat bracket holes. I had to drill 4 new holes for the drivers side bracket closest to the console. It was easy enough with the other bracket to reference from.
For the passenger side just a little correction, it was not direct bolt in. 3 new holes had to be drilled. Only the existing outside front could be used.

Here's a good link for bolt hole locations:
http://67-72chevytrucks.com/vboard/s...d.php?t=516328
Beaumont@ is offline  
Old 07-14-2014, 10:22 AM   #13
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,709
Re: Bucket seat conversion using bench seat brackets how to

You've done something I have only pondered. Thanks for getting out there and doing it so I can see it can be done! That came out great
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline  
Old 07-15-2014, 10:45 PM   #14
Beaumont@
Registered User
 
Join Date: Jul 2011
Location: Western Canada
Posts: 239
Re: Bucket seat conversion using bench seat brackets how to

Hey no worries special K, thought I'd give back a little since this site has helped me out so much already with my truck. Paying $200 for 2 used buckets and 2 consoles was a lot cheaper than the $600 + for used factory originals I was coming across.
Beaumont@ is offline  
Old 07-16-2014, 12:32 AM   #15
tommyd241
Registered User
 
tommyd241's Avatar
 
Join Date: May 2008
Location: 505
Posts: 447
Re: Bucket seat conversion using bench seat brackets how to

Looks great!
__________________
'68 SWB Fleetside
'98 K1500 Silverado
tommyd241 is offline  
Old 07-17-2014, 11:11 PM   #16
JonnyC10
Account Suspended
 
Join Date: Jul 2014
Location: NH
Posts: 280
Re: Bucket seat conversion using bench seat brackets how to

That is sweet!
JonnyC10 is offline  
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com