1965 c10 cuztom dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nhgonzo · 07-11-2016, 11:10 AM

Hi guys ,I've always been a lurker on this site .It's been about 15 years and finally the truck has seen day light.This is a extremely LOW budget getting divorced

build with son.questions & comments welcomed. picture heavy .

About 15 years ago ,age 3

Same 350 HO v8 from a 90 9c1.

Present day 16 years later ,pulled it out with wagon awaiting drive shaft.

Going on 18

nhgonzo · 07-11-2016, 11:52 PM

Rear air bags setup in action.

https://youtu.be/TeIHH0xtemE

lumpy63 · 07-15-2016, 08:57 PM

glad to see your back at it . i think its very important to pass our skills onto the younger generation vocational skills seems to be a dying art

nhgonzo · 07-16-2016, 08:59 PM

Quote:

Originally Posted by lumpy63

glad to see your back at it . i think its very important to pass our skills onto the younger generation vocational skills seems to be a dying art

Thank you

nhgonzo · 07-16-2016, 10:08 PM

Playing around with 8 lug Single wheels before the steel Duallys came into play. Drop spindles was the reason why we went with the dually setup.

Front dually setup with drop spindles and cut springs for now, awaiting airbag setup.

1st attempt on a rear dually set up. This rear was completely rotted out backing plates extremely rusted.The 2 ND rear was two thumbs up .

Cleaning scraping the rear ,the old school way .

nhgonzo · 07-16-2016, 10:33 PM

1st rear we learned our lesson.

2nd rear

Buffing/polishing the fuel cell.

**aerotruk63** · 07-17-2016, 08:24 AM

Perhaps not the right thread to comment in, but, the picture with the brake drum and hub facing vertical looks like the cast iron planters my girlfriend ogles over.

Great project, following.

**chevy2tom** · 07-17-2016, 09:11 AM

Looking good, love the forward tilt hood, nice to see the younger generation getting their hands dirty. Great job

nhgonzo · 07-19-2016, 09:47 PM

Quote:

Originally Posted by chevy2tom

Looking good, love the forward tilt hood, nice to see the younger generation getting their hands dirty. Great job

Thanks Tom

nhgonzo · 07-19-2016, 10:19 PM

Back in May I picked up a set of 19.5 for my son, to surprise him on his birthday.This Saturday 7/16/16 he received his birthday gift.

Picking up the 19.5 on top of the Shaved Woody back in May 2016

Happy Birthday ,picking 19.5 from a top secret hiding spot.(momz house)

Good old fashion elbow grease and S.O.S pads cleaned up extremely well.

[URL=http://s76.photobucket.com/user/nhgonzo/media/65%20c10/20160716_192628_zpson9huopw.jpg.html]

[/URL

]

**DPowers** · 07-19-2016, 10:32 PM

Wow. Looks great

**Gary V** · 07-20-2016, 05:39 AM

Bad ass build! Lots of hard work there

Bomp · 07-20-2016, 12:23 PM

Count me IN

tinydb84 · 07-20-2016, 12:36 PM

Very cool. Love the father son project. What are your plans for rear fenders?

**66ChevyMax** · 07-20-2016, 02:34 PM

Duals look awesome.

rusty76 · 09-05-2016, 12:14 PM

Cool truck. I know I'm late to the party but I hope there's more. I'm in for low budget builds.

cooperhw · 09-06-2016, 01:42 PM

Very cool.
I built a 68 1 ton dually shortbed last year. Widened the short bed 6 inches and it covered the duals perfectly.
What are you planning for a bed?
Great to see your son in the middle of it. That's how most of us all started. "One day your son will thank you for it. His wife, not soo much". Ha.

Be following this one.

07-11-2016, 11:10 AM	#1
nhgonzo Registered User Join Date: Apr 2016 Location: dirtywater, CT Posts: 9	1965 c10 cuztom dually Hi guys ,I've always been a lurker on this site .It's been about 15 years and finally the truck has seen day light.This is a extremely LOW budget getting divorced build with son.questions & comments welcomed. picture heavy . About 15 years ago ,age 3 Same 350 HO v8 from a 90 9c1. Present day 16 years later ,pulled it out with wagon awaiting drive shaft. Going on 18

07-11-2016, 11:52 PM	#2
nhgonzo Registered User Join Date: Apr 2016 Location: dirtywater, CT Posts: 9	Re: 1965 c10 cuztom dually Rear air bags setup in action. https://youtu.be/TeIHH0xtemE

07-15-2016, 08:57 PM	#3
lumpy63 Registered User Join Date: Apr 2016 Location: san diego ça Posts: 121	Re: 1965 c10 cuztom dually glad to see your back at it . i think its very important to pass our skills onto the younger generation vocational skills seems to be a dying art

07-16-2016, 10:08 PM	#5
nhgonzo Registered User Join Date: Apr 2016 Location: dirtywater, CT Posts: 9	Re: 1965 c10 cuztom dually Playing around with 8 lug Single wheels before the steel Duallys came into play. Drop spindles was the reason why we went with the dually setup. Front dually setup with drop spindles and cut springs for now, awaiting airbag setup. 1st attempt on a rear dually set up. This rear was completely rotted out backing plates extremely rusted.The 2 ND rear was two thumbs up . Cleaning scraping the rear ,the old school way . __________________ 1965 c10 cuztom dually build

07-16-2016, 10:33 PM	#6
nhgonzo Registered User Join Date: Apr 2016 Location: dirtywater, CT Posts: 9	Re: 1965 c10 cuztom dually 1st rear we learned our lesson. 2nd rear Buffing/polishing the fuel cell. __________________ 1965 c10 cuztom dually build

07-17-2016, 08:24 AM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: 1965 c10 cuztom dually Perhaps not the right thread to comment in, but, the picture with the brake drum and hub facing vertical looks like the cast iron planters my girlfriend ogles over. Great project, following. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-17-2016, 09:11 AM	#8
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: 1965 c10 cuztom dually Looking good, love the forward tilt hood, nice to see the younger generation getting their hands dirty. Great job

07-19-2016, 10:19 PM	#10
nhgonzo Registered User Join Date: Apr 2016 Location: dirtywater, CT Posts: 9	Re: 1965 c10 cuztom dually Back in May I picked up a set of 19.5 for my son, to surprise him on his birthday.This Saturday 7/16/16 he received his birthday gift. Picking up the 19.5 on top of the Shaved Woody back in May 2016 Happy Birthday ,picking 19.5 from a top secret hiding spot.(momz house) Good old fashion elbow grease and S.O.S pads cleaned up extremely well. [URL=http://s76.photobucket.com/user/nhgonzo/media/65%20c10/20160716_192628_zpson9huopw.jpg.html][/URL] __________________ 1965 c10 cuztom dually build

07-19-2016, 10:32 PM	#11
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: 1965 c10 cuztom dually Wow. Looks great __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

07-20-2016, 05:39 AM	#12
Gary V Active Member Join Date: Aug 2012 Location: East Hartford, CT Posts: 159	Re: 1965 c10 cuztom dually Bad ass build! Lots of hard work there __________________ Best regards, Gary DOMERINGER BUILD

07-20-2016, 12:23 PM	#13
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 1965 c10 cuztom dually Count me IN

07-20-2016, 12:36 PM	#14
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: 1965 c10 cuztom dually Very cool. Love the father son project. What are your plans for rear fenders? __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

07-20-2016, 02:34 PM	#15
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 1965 c10 cuztom dually Duals look awesome. __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

09-05-2016, 12:14 PM	#16
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: 1965 c10 cuztom dually Cool truck. I know I'm late to the party but I hope there's more. I'm in for low budget builds. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

09-06-2016, 01:42 PM	#17
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: 1965 c10 cuztom dually Very cool. I built a 68 1 ton dually shortbed last year. Widened the short bed 6 inches and it covered the duals perfectly. What are you planning for a bed? Great to see your son in the middle of it. That's how most of us all started. "One day your son will thank you for it. His wife, not soo much". Ha. Be following this one. __________________ "Life is too short to drive a boring vehicle". Later, Wayne



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.