For Sale: Billet Aluminum Dash Panels - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

corn · 09-27-2007, 04:30 PM

Dont need any right now, but wanted to comment that those look awesome. Lotta work involved making both parts & a great price for the work involved...

68GMCCustom · 09-27-2007, 05:11 PM

I want a set! I need to sell some of my parts 1st though to pay for them!

**88JRFAN** · 10-11-2007, 12:10 AM

RYAN, HAVE YOU GOTTEN ANY WHERE ON THE WEBSITE. I'D LIKE A SET, BUT IT'LL BE WHILE BEFORE I CAN GET THEM. THEY LOOK GREAT!!!!

Ryan Hubbard · 10-11-2007, 12:38 AM

The website will be up next month hopefully. Been putting in 80 hour work weeks and trying to oversee the website has gotten overwhelming. But we are on track to have it up by November.

*FormerMember* · 10-11-2007, 09:08 AM

Should I be calling you for my two sets?

Ryan Hubbard · 10-11-2007, 10:53 AM

You can call me at 562-537-1348 but I have to turn off my cell phone most of the day if I am job sites because they are hazardous areas and you can't use your cell phone or you can email me at ryan.hubbard@aspencontrols.com. I take M/C, Visa and Amex and Paypal. My paypal address is the same as my email.

derrickc · 10-18-2007, 10:28 PM

I don't even own one of these trucks, but I would buy one just to have....nice job, I have a 86, ever do one of those bezels

jfalesi · 10-28-2007, 01:41 AM

Ryan,

Also emailing but posting here for FYI for other members... I have a couple of questions:

1) Are the front faces flat or curved like stock?
2) How pronounced are the "trim rings" around the holes? I have some Autometer gauges I'd like to front-mount.
3) I have a 3 1/8 tach. Are you making any gauge panels with a 3 1/8 center hole? If not I assume I will be able to drill out a 2 1/16 hole or no-hole to 3 3/8, but then the size of your "trim ring" comes into play...

Otherwise, the panels are awesome and I want one as much as humanly possible.

Thanks,
-Jamie

jfalesi · 10-29-2007, 11:34 AM

Just an idea, but the raised letter pieces are available aftermarket, so if you omitted the raised lettering maybe you could sell them cheaper?

Quote:

Originally Posted by Ryan Hubbard

Hart-Rod,

I did get your message about putting logo's on the glovebox door but I cannot do it right now. First, I have to research if CHevy still has the rights to some of the logos and the time it takes to do a logo on the glove box is too long and would add to the price. On the dash panel, the raised letters take half of the machining time of the whole piece. We have to use an endmill that is only 1/32" in diameter and you cannot use high feedrates or high rpms on these little endmills. I would love to do all the little add ons people want or different configurations but each change take at least 1 hour of programming to change and I charge $120.00 per hour for programming. So instantly you have to add $120.00 to the price for making just one change. Sorry for bad news.

Regards,

Ryan Hubbard

jfalesi · 10-29-2007, 11:37 AM

Mike,

I am interested if you still have them. Let me know,

-Jamie

Quote:

Originally Posted by Musclerodz

I have a set here as well and they are nice. If Ryan is out and someone wants this set, pay me the board price plus shipping and you can have this set. I will be running a slightly different set up in my Blazer.

Ryan Hubbard · 11-02-2007, 11:29 PM

I still have a couple left from the original run and I have three done with the center hole done for a 3 3/8" but I deleted the holes for the turn signal and high beam indicator lights. I will post 3D models of all the different layouts I will be offering. Please contact me either through my email or phone if you are interested in purchasing one. I do not have constant internet access right now because I am on a job right now but I do get my email. So I do not have the ability to regularly check for PM's on the board.

Regards,

Ryan Hubbard

fatsak · 11-07-2007, 11:40 PM

signing on for reference sake

67C10SWB · 11-13-2007, 11:29 PM

Ryan,

I'm coming in on the discussion way late but I think these are awesome looking. What is the current status of them? is is possible to buy one with the two 3 3/8 and five 2 1/16 openings. Also interested in the glove box lid as well. Thanks, Mike

rkarr · 11-21-2007, 08:32 PM

ttt

**passthebuck** · 11-22-2007, 06:17 PM

Just ordered me a set!

b&a72 · 12-13-2007, 10:29 AM

Anything on the new layouts yet?

skydiver · 12-14-2007, 04:32 PM

Add me to the list also. Prefer larger 5" gauges.

jjgmc · 12-14-2007, 05:03 PM

can you make them for the 81 gmc?????

bigo181979 · 12-15-2007, 04:30 AM

Just got mine in yesterday

, all I can Say is WOW

The pictures don't do it justice! Next I have to drop it off to have it polished and maybe chromed!

jamis · 12-15-2007, 05:00 AM

email sent

b&a72 · 12-15-2007, 06:02 AM

Quote:

Originally Posted by bigo181979

Just got mine in yesterday

, all I can Say is WOW

The pictures don't do it justice! Next I have to drop it off to have it polished and maybe chromed!

Have you installed the gauges yet? How easy do they mount from the backside?

bigo181979 · 12-15-2007, 12:12 PM

I mounted them from the front, I don't think its set up tomount them from the back.

b&a72 · 12-15-2007, 12:53 PM

Quote:

Originally Posted by bigo181979

I mounted them from the front, I don't think its set up tomount them from the back.

When you get a chance could you post a pic?

bigo181979 · 12-15-2007, 12:59 PM

Here is a pick he sent me of one with gauges I am still ateing on my spedo and tack and boost gauge to come in but I will try to take some pics for you tonight of what I have.

b&a72 · 12-15-2007, 06:10 PM

Sweet that would be great. From that picture it looks like they are mounted from the inside.

09-27-2007, 04:30 PM	#76
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: For Sale: Billet Aluminum Dash Panels Dont need any right now, but wanted to comment that those look awesome. Lotta work involved making both parts & a great price for the work involved...

09-27-2007, 05:11 PM	#77
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: For Sale: Billet Aluminum Dash Panels I want a set! I need to sell some of my parts 1st though to pay for them! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-11-2007, 12:10 AM	#78
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: For Sale: Billet Aluminum Dash Panels RYAN, HAVE YOU GOTTEN ANY WHERE ON THE WEBSITE. I'D LIKE A SET, BUT IT'LL BE WHILE BEFORE I CAN GET THEM. THEY LOOK GREAT!!!!

10-11-2007, 12:38 AM	#79
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels The website will be up next month hopefully. Been putting in 80 hour work weeks and trying to oversee the website has gotten overwhelming. But we are on track to have it up by November.

10-11-2007, 09:08 AM	#80
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: For Sale: Billet Aluminum Dash Panels Should I be calling you for my two sets?

10-11-2007, 10:53 AM	#81
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels You can call me at 562-537-1348 but I have to turn off my cell phone most of the day if I am job sites because they are hazardous areas and you can't use your cell phone or you can email me at ryan.hubbard@aspencontrols.com. I take M/C, Visa and Amex and Paypal. My paypal address is the same as my email.

10-18-2007, 10:28 PM	#82
derrickc Registered User Join Date: Oct 2007 Location: Newfoundland, Canada Posts: 51	Re: For Sale: Billet Aluminum Dash Panels I don't even own one of these trucks, but I would buy one just to have....nice job, I have a 86, ever do one of those bezels

10-28-2007, 01:41 AM	#83
jfalesi Junior Member Join Date: Jul 2006 Location: Delran, NJ Posts: 458	Re: For Sale: Billet Aluminum Dash Panels Ryan, Also emailing but posting here for FYI for other members... I have a couple of questions: 1) Are the front faces flat or curved like stock? 2) How pronounced are the "trim rings" around the holes? I have some Autometer gauges I'd like to front-mount. 3) I have a 3 1/8 tach. Are you making any gauge panels with a 3 1/8 center hole? If not I assume I will be able to drill out a 2 1/16 hole or no-hole to 3 3/8, but then the size of your "trim ring" comes into play... Otherwise, the panels are awesome and I want one as much as humanly possible. Thanks, -Jamie

11-02-2007, 11:29 PM	#86
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels I still have a couple left from the original run and I have three done with the center hole done for a 3 3/8" but I deleted the holes for the turn signal and high beam indicator lights. I will post 3D models of all the different layouts I will be offering. Please contact me either through my email or phone if you are interested in purchasing one. I do not have constant internet access right now because I am on a job right now but I do get my email. So I do not have the ability to regularly check for PM's on the board. Regards, Ryan Hubbard

11-07-2007, 11:40 PM	#87
fatsak Registered User Join Date: Jan 2006 Location: gape girartdeau, mo Posts: 1	Re: For Sale: Billet Aluminum Dash Panels signing on for reference sake

11-13-2007, 11:29 PM	#88
67C10SWB Registered User Join Date: Aug 2007 Location: Meridian, Idaho Posts: 27	Re: For Sale: Billet Aluminum Dash Panels Ryan, I'm coming in on the discussion way late but I think these are awesome looking. What is the current status of them? is is possible to buy one with the two 3 3/8 and five 2 1/16 openings. Also interested in the glove box lid as well. Thanks, Mike

11-21-2007, 08:32 PM	#89
rkarr Registered User Join Date: Sep 2005 Location: Roseville, CA Posts: 152	Re: For Sale: Billet Aluminum Dash Panels ttt __________________ Avatar is a pic of "Before"... Just wait.. ---------------- 1969 Fleetside: Shortened frame for SWB, ECE 4-6 drop. ECE SS tank. All new ECE suspension. Rebuilt 12 bolt 3:73 with Eaton Posi. Front and rear disc brakes. Ramjet 350 and 700r-4 trans. 20" Centerline wheels with Kumho 295/45/20 tires (I hope they fit). Progress pics: http://s44.photobucket.com/albums/f2...uck/?start=all ---------------- Seriously... It's nothing a large dose of cash can't fix... Right? After all, I can't take it with me when I go... Just gotta have enough to get there!!!

11-22-2007, 06:17 PM	#90
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: For Sale: Billet Aluminum Dash Panels Just ordered me a set! __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

12-13-2007, 10:29 AM	#91
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: For Sale: Billet Aluminum Dash Panels Anything on the new layouts yet?

12-14-2007, 04:32 PM	#92
skydiver Just a fan. Join Date: Dec 2007 Location: Royal Oak, MI Posts: 39	Re: For Sale: Billet Aluminum Dash Panels Add me to the list also. Prefer larger 5" gauges.



Register or Log In To remove these advertisements.

12-14-2007, 05:03 PM	#93
jjgmc Registered User Join Date: Nov 2007 Location: Longview,texas Posts: 119	Re: For Sale: Billet Aluminum Dash Panels can you make them for the 81 gmc?????

12-15-2007, 04:30 AM	#94
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: For Sale: Billet Aluminum Dash Panels Just got mine in yesterday , all I can Say is WOW The pictures don't do it justice! Next I have to drop it off to have it polished and maybe chromed!

12-15-2007, 05:00 AM	#95
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	Re: For Sale: Billet Aluminum Dash Panels email sent __________________ F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis"

12-15-2007, 12:12 PM	#97
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: For Sale: Billet Aluminum Dash Panels I mounted them from the front, I don't think its set up tomount them from the back. Last edited by bigo181979; 12-15-2007 at 12:13 PM.

12-15-2007, 12:59 PM	#99
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: For Sale: Billet Aluminum Dash Panels Here is a pick he sent me of one with gauges I am still ateing on my spedo and tack and boost gauge to come in but I will try to take some pics for you tonight of what I have.

12-15-2007, 06:10 PM	#100
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: For Sale: Billet Aluminum Dash Panels Sweet that would be great. From that picture it looks like they are mounted from the inside.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.