Students are in a "pulley jam"...HELP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 09-10-2019, 02:00 PM

Was wondering if any of you that have upgraded to factory ac/ps may have a matching set of JUST water pump and balancer puleys, and alternator bracket for a small block that you would be willing to part with in the very near future!... We are trying to get the kids' 383's that we built on our run stand and fire off finally. They competed (and placed) with them at the MN state fair last August and waited to fire them off till beginning of this school year. All I have is ps and AC pulleys in my backyard out of my parts trucks and itd be nice to have the simpler system to keep with the run stand and use them for future kid builds! IN a perfect world, I 'm thinking a set from a 73-77 c10 with power nothing may lend itself the best. Any help is appreciated!
--Mike

**mongocanfly** · 09-10-2019, 04:16 PM

if all yuor wantin is to run on a engine stand id just grab a electric water pump drive...very simple setup...
like this...https://www.summitracing.com/parts/mor-63750

sweetk30 · 09-10-2019, 07:00 PM

and turn the green engines water pump 180* so it works better what ever setup you pick .

**tkeduk8r** · 09-10-2019, 08:04 PM

Hahaha... tgat was a running joke for us!
Mike

**tkeduk8r** · 09-10-2019, 08:18 PM

Now that i think of it, shoulda prolly put this in parts board

Mike

lowrollin70gmc · 09-10-2019, 08:45 PM

I have a set of billet water pump, crank and alternator pulleys with bracket for alternator. They are dull from storage but could likely get a shine in them again. They were on a 70 El Camino when I swapped it to a serpentine setup a few years ago. I’ll grab some pictures for you later this evening.

Oddly enough, on Friday I’ll be taking a leisurely (and hopefully dry and warmer) motorcycle ride from Fargo to Duluth and could “swing thru” Alex to drop them off if they’ll work for your students.

lowrollin70gmc · 09-10-2019, 09:40 PM

Here are some pictures of the setup. Their storage spot got damp at some time so there is more surface corrosion than I remembered. Being thick aluminum they should polish up decent with some elbow grease.

Another surprise to me is that there is also a set of power steering brackets and a matching pulley. It can also be run without the power steering (for run stand use).

Just let me know if these will work and I’m happy to donate them to the school. High School Auto Body was one of my favorite classes and through a winding path helped me land in my current occupation (Fleet / Heavy Equipment Mechanic) building hot rods on the side.

**tkeduk8r** · 09-16-2019, 06:56 PM

Holy cow! That would be awesome! Kids can clean them up and make them work!!!! Ill make them work!!!! Ill send you a PM!

KQQL IT · 09-17-2019, 10:06 PM

Quote:

Originally Posted by sweetk30

and turn the green engines water pump 180* so it works better what ever setup you pick .

Hahaha

09-10-2019, 02:00 PM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Students are in a "pulley jam"...HELP! Was wondering if any of you that have upgraded to factory ac/ps may have a matching set of JUST water pump and balancer puleys, and alternator bracket for a small block that you would be willing to part with in the very near future!... We are trying to get the kids' 383's that we built on our run stand and fire off finally. They competed (and placed) with them at the MN state fair last August and waited to fire them off till beginning of this school year. All I have is ps and AC pulleys in my backyard out of my parts trucks and itd be nice to have the simpler system to keep with the run stand and use them for future kid builds! IN a perfect world, I 'm thinking a set from a 73-77 c10 with power nothing may lend itself the best. Any help is appreciated! --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-10-2019, 04:16 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,583	Re: Students are in a "pulley jam"...HELP! if all yuor wantin is to run on a engine stand id just grab a electric water pump drive...very simple setup... like this...https://www.summitracing.com/parts/mor-63750 __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

09-10-2019, 07:00 PM	#3
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Students are in a "pulley jam"...HELP! and turn the green engines water pump 180* so it works better what ever setup you pick . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

09-10-2019, 08:04 PM	#4
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Students are in a "pulley jam"...HELP! Hahaha... tgat was a running joke for us! Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-10-2019, 08:18 PM	#5
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Students are in a "pulley jam"...HELP! Now that i think of it, shoulda prolly put this in parts board Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-10-2019, 08:45 PM	#6
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Students are in a "pulley jam"...HELP! I have a set of billet water pump, crank and alternator pulleys with bracket for alternator. They are dull from storage but could likely get a shine in them again. They were on a 70 El Camino when I swapped it to a serpentine setup a few years ago. I’ll grab some pictures for you later this evening. Oddly enough, on Friday I’ll be taking a leisurely (and hopefully dry and warmer) motorcycle ride from Fargo to Duluth and could “swing thru” Alex to drop them off if they’ll work for your students. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

09-10-2019, 09:40 PM	#7
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Students are in a "pulley jam"...HELP! Here are some pictures of the setup. Their storage spot got damp at some time so there is more surface corrosion than I remembered. Being thick aluminum they should polish up decent with some elbow grease. Another surprise to me is that there is also a set of power steering brackets and a matching pulley. It can also be run without the power steering (for run stand use). Just let me know if these will work and I’m happy to donate them to the school. High School Auto Body was one of my favorite classes and through a winding path helped me land in my current occupation (Fleet / Heavy Equipment Mechanic) building hot rods on the side. Attached Images __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

09-16-2019, 06:56 PM	#8
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Students are in a "pulley jam"...HELP! Holy cow! That would be awesome! Kids can clean them up and make them work!!!! Ill make them work!!!! Ill send you a PM! __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.