Wiper arm and blades P/N's that work, FYI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

earl84 · 02-17-2016, 10:46 AM

My truck had no wiper arms when I bought it, so I purchased some stainless steel arms from LMC. Not great, to say the least. The quality was so-so, but more important, the top 2 inches or so of the blade was never in contact with the windshield, and the center of the blade contact was not very good, either, making them almost worthless.

Somewhere I ran across a part number for wiper arms that are adjustable in length and wiper blade angle, and they work great, the full blade is clearing the window, they park perfectly, the length is perfect. Just thought I'd pass this along, I've been looking for a good solution off and on for over a year.

Trico part number 51-151 for the wiper arm. They are a dull silver finish. About $12 apiece at O'Reilly Auto Parts.
Anco part number 31-13 for the wiper blades. These are the winter blades, not sure on a part number for summer blades.

**MikeN** · 02-17-2016, 11:38 AM

Thank you!

sanford66 · 02-17-2016, 12:34 PM

Thanks for the tip, I've been fighting this for the last month or so, can't find anything that works. Joseph

**undertaker72** · 02-17-2016, 12:35 PM

Thanks for the help

oakstcustomz · 02-17-2016, 03:45 PM

Yes thanks!! I bought the same but my wipers are the same color as the arms... I got taken for over $100 for the set by my friendly local napa auto parts

motaboata · 02-17-2016, 04:18 PM

Thanks!! Same issue truck has no arms... lots of rain-x was used! this will help

**Palf70Step** · 02-17-2016, 08:51 PM

Thank you for the info, VERY useful.

60chevyjim · 02-17-2016, 10:54 PM

I found these on ebay today ,
after the ones from lmc for my friend's truck got here today.
these look way better than the ones he got today

http://www.ebay.com/itm/1960-1966-Ch...B_iR-WwEdpWc1g

**LostMy65** · 03-06-2016, 12:24 PM

Quote:

Originally Posted by 60chevyjim

I found these on ebay today ,
after the ones from lmc for my friend's truck got here today.
these look way better than the ones he got today

http://www.ebay.com/itm/1960-1966-Ch...B_iR-WwEdpWc1g

How are they working out for you?

frankslagoon · 03-06-2016, 01:01 PM

Earl. what year is your truck?

60chevyjim · 03-06-2016, 01:38 PM

Quote:

Originally Posted by LostMy65

How are they working out for you?

I didn't buy them yet but I use similar ones on my
59 and 60 chevy cars and they work pretty good .

WOLFMANmike · 03-06-2016, 10:30 PM

im not sure if they are the same as the LMC ones or not but i ordered the ones from Orange truckshop.com for our trucks and have no problems at all with them and they are Stainless Steel

C40 · 09-20-2019, 06:26 PM

The truck I bought has no wiper blades. Will someone please let me know what is the correct size blades for the 60-63? Thanks

**Palf70Step** · 09-21-2019, 07:48 AM

13" is the standard size

C40 · 09-21-2019, 12:38 PM

Quote:

Originally Posted by Palf70Step

13" is the standard size

Will 15” fit ?
Posted via Mobile Device

**Palf70Step** · 09-21-2019, 02:29 PM

I think they will hit in the middle, but I have never tried them.

vince1 · 09-21-2019, 04:35 PM

For the RH side I have the one from the back of a Jeep Cherokee. I haven't found one yet to modify for the LH side.

scottofksu · 09-22-2019, 10:01 AM

Are these the blades you tried? If not, has anyone tried these?

**Palf70Step** · 09-22-2019, 04:43 PM

If you can find them, yes those are the good ones. Normally, NAPA or other parts places do not keep them in stock, least that is the way it is around here.

**rideblue00** · 09-29-2019, 04:48 PM

Subscribed

norcalcap · 09-29-2019, 06:24 PM

Quote:

Originally Posted by vince1

For the RH side I have the one from the back of a Jeep Cherokee. I haven't found one yet to modify for the LH side.

I used the same one, just drilled out the rivet, flipped the arm and new rivet. Works great. Just a little tough removing and replacing the tension spring.

02-17-2016, 10:46 AM	#1
earl84 Registered User Join Date: Aug 2011 Location: Montrose, CO Posts: 972	Wiper arm and blades P/N's that work, FYI My truck had no wiper arms when I bought it, so I purchased some stainless steel arms from LMC. Not great, to say the least. The quality was so-so, but more important, the top 2 inches or so of the blade was never in contact with the windshield, and the center of the blade contact was not very good, either, making them almost worthless. Somewhere I ran across a part number for wiper arms that are adjustable in length and wiper blade angle, and they work great, the full blade is clearing the window, they park perfectly, the length is perfect. Just thought I'd pass this along, I've been looking for a good solution off and on for over a year. Trico part number 51-151 for the wiper arm. They are a dull silver finish. About $12 apiece at O'Reilly Auto Parts. Anco part number 31-13 for the wiper blades. These are the winter blades, not sure on a part number for summer blades. Attached Images

02-17-2016, 11:38 AM	#2
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 776	Re: Wiper arm and blades P/N's that work, FYI Thank you!

02-17-2016, 12:34 PM	#3
sanford66 Registered User Join Date: Jun 2007 Location: Everest Ks Posts: 749	Re: Wiper arm and blades P/N's that work, FYI Thanks for the tip, I've been fighting this for the last month or so, can't find anything that works. Joseph __________________ 1970 Chevelle Nomad station wagon 1966 C-10 lwb,250-six,granny 4speed 1966 C-10 lwb,factory A/C,Custom Cab 1954 Delray 2-door sedan [rat rod project]

02-17-2016, 12:35 PM	#4
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Wiper arm and blades P/N's that work, FYI Thanks for the help __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

02-17-2016, 03:45 PM	#5
oakstcustomz Registered User Join Date: Apr 2010 Location: Willits Ca Posts: 132	Re: Wiper arm and blades P/N's that work, FYI Yes thanks!! I bought the same but my wipers are the same color as the arms... I got taken for over $100 for the set by my friendly local napa auto parts __________________ 1965 Chevy C-20 slammed 292 L6 TH400 1967 Chevy C-20 on 91 suburban frame project(wife's) 1972 Chevy K-20 Mild 350/th350/np2o5 dd 1952 Ford Customline 2door kustom project 1967 Cadillac Superior Hearse (wife's) 1998 GMC Saffari (wife's dd)

02-17-2016, 04:18 PM	#6
motaboata Registered User Join Date: Dec 2015 Location: PAWTUCKET RI Posts: 3	Re: Wiper arm and blades P/N's that work, FYI Thanks!! Same issue truck has no arms... lots of rain-x was used! this will help

02-17-2016, 08:51 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Wiper arm and blades P/N's that work, FYI Thank you for the info, VERY useful. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-17-2016, 10:54 PM	#8
60chevyjim Registered User Join Date: Dec 2015 Location: tarboro nc. Posts: 400	Re: Wiper arm and blades P/N's that work, FYI I found these on ebay today , after the ones from lmc for my friend's truck got here today. these look way better than the ones he got today http://www.ebay.com/itm/1960-1966-Ch...B_iR-WwEdpWc1g

03-06-2016, 01:01 PM	#10
frankslagoon Registered User Join Date: Jan 2014 Location: Wasilla Alaska Posts: 537	Re: Wiper arm and blades P/N's that work, FYI Earl. what year is your truck?

03-06-2016, 10:30 PM	#12
WOLFMANmike Registered User Join Date: Sep 2012 Location: oceanside CA Posts: 706	Re: Wiper arm and blades P/N's that work, FYI im not sure if they are the same as the LMC ones or not but i ordered the ones from Orange truckshop.com for our trucks and have no problems at all with them and they are Stainless Steel

09-20-2019, 06:26 PM	#13
C40 Registered User Join Date: Jul 2016 Location: Las Vegas NV Posts: 24	Re: Wiper arm and blades P/N's that work, FYI The truck I bought has no wiper blades. Will someone please let me know what is the correct size blades for the 60-63? Thanks

09-21-2019, 07:48 AM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Wiper arm and blades P/N's that work, FYI 13" is the standard size __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-21-2019, 02:29 PM	#16
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Wiper arm and blades P/N's that work, FYI I think they will hit in the middle, but I have never tried them. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 09-21-2019 at 05:07 PM.

09-21-2019, 04:35 PM	#17
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,164	Re: Wiper arm and blades P/N's that work, FYI For the RH side I have the one from the back of a Jeep Cherokee. I haven't found one yet to modify for the LH side.

09-22-2019, 10:01 AM	#18
scottofksu Registered User Join Date: Nov 2011 Location: Omaha, Nebraska Posts: 431	Re: Wiper arm and blades P/N's that work, FYI Are these the blades you tried? If not, has anyone tried these? Attached Images __________________ Travis' Tribute Truck - 65 C10 Frame Up Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=495073



Register or Log In To remove these advertisements.

09-22-2019, 04:43 PM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,634	Re: Wiper arm and blades P/N's that work, FYI If you can find them, yes those are the good ones. Normally, NAPA or other parts places do not keep them in stock, least that is the way it is around here. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-29-2019, 04:48 PM	#20
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,854	Re: Wiper arm and blades P/N's that work, FYI Subscribed

Register or Log In To remove these advertisements.