BBC with A/C Radiator brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biohazardbill · 03-08-2013, 06:44 PM

So I have a stock 4 core radiator to go into the 67. I purchased a set of used wider brackets to accomodate this radiator. The original core support had rot underneath the battery tray as most do so I have replaced that. Now as I go to put in the lower mounts it hits the front lip of the core support. So I took them and test fit them in the factory core support. Same thing. Quick fix would be to just notch the lip however since it doesnt fit the after market core support and the original core support just making sure I am not missing something as it would be a shame to notch a brand new piece.

Thanks in advance.

**john** · 03-08-2013, 07:30 PM

I used a crescent wrench and bent the lip a bit.

vidman · 03-08-2013, 08:14 PM

My 4 core brackets fit OK. but I had to notch the bottom of my support for the 4 core radiator tanks to fit. just used my angle grinder with a cut-off wheel

PanelDeland · 03-08-2013, 09:50 PM

I've never heard of one not needing to be notched,unless equiped with a 4 core originally.

03-08-2013, 06:44 PM	#1
biohazardbill Registered User Join Date: Jan 2010 Location: Forsyth, Ga Posts: 1,012	BBC with A/C Radiator brackets So I have a stock 4 core radiator to go into the 67. I purchased a set of used wider brackets to accomodate this radiator. The original core support had rot underneath the battery tray as most do so I have replaced that. Now as I go to put in the lower mounts it hits the front lip of the core support. So I took them and test fit them in the factory core support. Same thing. Quick fix would be to just notch the lip however since it doesnt fit the after market core support and the original core support just making sure I am not missing something as it would be a shame to notch a brand new piece. Thanks in advance.

03-08-2013, 07:30 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: BBC with A/C Radiator brackets I used a crescent wrench and bent the lip a bit. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

03-08-2013, 08:14 PM	#3
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: BBC with A/C Radiator brackets My 4 core brackets fit OK. but I had to notch the bottom of my support for the 4 core radiator tanks to fit. just used my angle grinder with a cut-off wheel __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

03-08-2013, 09:50 PM	#4
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: BBC with A/C Radiator brackets I've never heard of one not needing to be notched,unless equiped with a 4 core originally. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.