fender emblem mounting without removing the fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70 shorty · 02-18-2019, 08:13 PM

I've got some C10 emblems to mount and honestly, I'm too lazy to remove the fenders just to install them. I don't really want to use emblem tape, and have ordered 2 different size barrel clips, one for a 7/32 hole, which my 7/32 drill bit fit in the existing hole perfect, and so does the emblem, but those clips are too big. Then I ordered 3/16 barrel clips and they fall through the hole. I can't find anything local, so I've been ordering off of Amazon, and it's not worth sending them back even though I"ll never use what I have. (they were only $10 each order). Can anyone help with something they know works, or if someone has some clips they've successfully used, I'd gladly pay you for some.

custom10nut · 02-18-2019, 08:35 PM

Barrel clips from NAPA, but get the bigger ones

70 shorty · 02-18-2019, 08:40 PM

tried my local Napa, and they didn't have anything, and they're usually really good. You wouldn't happen to have a part number would you?

SavageC20 · 02-19-2019, 03:34 AM

You can get to the backside by pulling out the inner fender/wheel well. Take tire off and remove 10 ish bolts then the wheel well drops out. No need to mess with taking whole fender off.

panhead59 · 02-19-2019, 07:42 AM

I've got some extras. Let me confirm when i get home wed. Morning. No charge. The ones i have did come from napa. They fit perfectly. I'll get back to ya wed. Or do a search here for napa part # if you don't want to wait.

panhead59 · 02-20-2019, 10:20 AM

I can't put my hands on my extras right now but LocDoc has a good post on this install in the advance search option. Your Napa part # 665-1457 are the ones you want. Cheap to !

custom10nut · 02-20-2019, 10:37 AM

Panhead beat me to it

**LockDoc** · 02-20-2019, 10:54 AM

Quote:

Originally Posted by panhead59

I can't put my hands on my extras right now but LocDoc has a good post on this install in the advance search option. Your Napa part # 665-1457 are the ones you want. Cheap to !

Here is the thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=312162

Man that was a long time ago....

I wonder if the ones shorty is getting are actually metric... Dunno.

LockDoc

70 shorty · 02-20-2019, 05:38 PM

Thanks guys, I got it taken care of.

02-18-2019, 08:13 PM	#1
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	fender emblem mounting without removing the fender I've got some C10 emblems to mount and honestly, I'm too lazy to remove the fenders just to install them. I don't really want to use emblem tape, and have ordered 2 different size barrel clips, one for a 7/32 hole, which my 7/32 drill bit fit in the existing hole perfect, and so does the emblem, but those clips are too big. Then I ordered 3/16 barrel clips and they fall through the hole. I can't find anything local, so I've been ordering off of Amazon, and it's not worth sending them back even though I"ll never use what I have. (they were only $10 each order). Can anyone help with something they know works, or if someone has some clips they've successfully used, I'd gladly pay you for some. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

02-18-2019, 08:35 PM	#2
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,846	Re: fender emblem mounting without removing the fender Barrel clips from NAPA, but get the bigger ones

02-18-2019, 08:40 PM	#3
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: fender emblem mounting without removing the fender tried my local Napa, and they didn't have anything, and they're usually really good. You wouldn't happen to have a part number would you? __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

02-19-2019, 03:34 AM	#4
SavageC20 Registered User Join Date: Sep 2018 Location: California Posts: 151	Re: fender emblem mounting without removing the fender You can get to the backside by pulling out the inner fender/wheel well. Take tire off and remove 10 ish bolts then the wheel well drops out. No need to mess with taking whole fender off.

02-19-2019, 07:42 AM	#5
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 473	Re: fender emblem mounting without removing the fender I've got some extras. Let me confirm when i get home wed. Morning. No charge. The ones i have did come from napa. They fit perfectly. I'll get back to ya wed. Or do a search here for napa part # if you don't want to wait. __________________ "You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive !

02-20-2019, 10:20 AM	#6
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 473	Re: fender emblem mounting without removing the fender I can't put my hands on my extras right now but LocDoc has a good post on this install in the advance search option. Your Napa part # 665-1457 are the ones you want. Cheap to ! __________________ "You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive !

02-20-2019, 10:37 AM	#7
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,846	Re: fender emblem mounting without removing the fender Panhead beat me to it

02-20-2019, 05:38 PM	#9
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: fender emblem mounting without removing the fender Thanks guys, I got it taken care of. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.