Help with tire/lift fitment q78 tires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Madipie03 · 10-10-2012, 10:34 PM

Im looking at a set of q78 buckshots for my suburban I just bought. However im not sure what they will require for lift. They are a taller skinnier tire and with the right offset im hoping they will fit. The PO of my 70 k20 burb said hes pretty sure it was a 4" lift he put on it some years ago. Ive gotten mixed readings from measurements as far as hub to fender. Maybe the trucks and burbs were somehow slightly different. I dont think so. When I measure from the center of my front hub to bottom of fender I get 25 3/4 inches. The rear sits almost 2 inches lower than the front from the ground. So it sags and it already has a 2 inch block under the rear. Maybe it was a 4" and is wore out or? If anyone has a 67-72 with simliar size tires or buckshots please post a pic too.! Thanks

**special-K** · 10-10-2012, 11:18 PM

If you have a 4" lift,they will fit for sure.

Madipie03 · 10-10-2012, 11:20 PM

Thinking about running them on steel fords, or k2500 rims. So Im sure offest will be fine. I just need to figure out the lift so I can buy them before theyre gone! Thanks for the feedback.

OLDCHEV4X4 · 10-11-2012, 01:52 PM

Quote:

Originally Posted by Madipie03

Im looking at a set of q78 buckshots

Good luck, They quit making the old school Buckshots a couple years ago.
I wish they did, cause I need some P's.

Madipie03 · 08-14-2013, 06:14 PM

You can look on fleabay. They have some new ones on there that were mislabeled. They are under blem tires. Brand new tho!

10-10-2012, 10:34 PM	#1
Madipie03 Registered User Join Date: Oct 2011 Location: Postfalls ID Posts: 205	Help with tire/lift fitment q78 tires Im looking at a set of q78 buckshots for my suburban I just bought. However im not sure what they will require for lift. They are a taller skinnier tire and with the right offset im hoping they will fit. The PO of my 70 k20 burb said hes pretty sure it was a 4" lift he put on it some years ago. Ive gotten mixed readings from measurements as far as hub to fender. Maybe the trucks and burbs were somehow slightly different. I dont think so. When I measure from the center of my front hub to bottom of fender I get 25 3/4 inches. The rear sits almost 2 inches lower than the front from the ground. So it sags and it already has a 2 inch block under the rear. Maybe it was a 4" and is wore out or? If anyone has a 67-72 with simliar size tires or buckshots please post a pic too.! Thanks

10-10-2012, 11:18 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Help with tire/lift fitment q78 tires If you have a 4" lift,they will fit for sure. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-10-2012, 11:20 PM	#3
Madipie03 Registered User Join Date: Oct 2011 Location: Postfalls ID Posts: 205	Re: Help with tire/lift fitment q78 tires Thinking about running them on steel fords, or k2500 rims. So Im sure offest will be fine. I just need to figure out the lift so I can buy them before theyre gone! Thanks for the feedback.

08-14-2013, 06:14 PM	#5
Madipie03 Registered User Join Date: Oct 2011 Location: Postfalls ID Posts: 205	Re: Help with tire/lift fitment q78 tires You can look on fleabay. They have some new ones on there that were mislabeled. They are under blem tires. Brand new tho!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.