Is this a good welder? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972K20 · 04-02-2013, 01:10 AM

CAMPBELL HAUSFELD FLUX 80

I found one for sale and was wondering if it was a decent welder.

midniteblues · 04-02-2013, 08:29 AM

I had one of these its really no good for doing sheetmetal you'll just burn/chase holes with it an get frustrated.

it was best suited for welding heavier stuff but at 80 amps it really was good for that either.

if you plan on doing sheetmetal save up for a decent mig you'll be much better off.

I give the one i had credit for one thing IT WAS BEAT TOO HELL BUT KEPT ON WORKING

word of caution if its grounded becarefull cause the wire is hot an you'll get flashed if it touches the work this also makes it very difficult to get setup

04-02-2013, 01:10 AM	#1
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Is this a good welder? CAMPBELL HAUSFELD FLUX 80 I found one for sale and was wondering if it was a decent welder.

04-02-2013, 08:29 AM	#2
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: Is this a good welder? I had one of these its really no good for doing sheetmetal you'll just burn/chase holes with it an get frustrated. it was best suited for welding heavier stuff but at 80 amps it really was good for that either. if you plan on doing sheetmetal save up for a decent mig you'll be much better off. I give the one i had credit for one thing IT WAS BEAT TOO HELL BUT KEPT ON WORKING word of caution if its grounded becarefull cause the wire is hot an you'll get flashed if it touches the work this also makes it very difficult to get setup __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.