window track inside door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elkniks · 06-30-2020, 11:56 PM

Is the short piece of track for the widow regulator spot welded onto the inside of the door? I installed a P.O.S. power window kit years ago and had to remove the piece of track on the inside of the door and cut out the stop at the bottom of the door. I now want to go back to an original style regulator. I can fab a window stop but I am not sure about the short piece of track. I am not ruling out just finding a decent set of truck doors and cutting them. My drivers door has some serious rust in the back corner. Both of the doors I have now are cut truck doors.

*randy500* · 07-01-2020, 02:06 AM

The rear track does bolt in, i have some for sale if needed, send me a PM if interested.

**bigmac73** · 07-01-2020, 07:03 AM

there is a good video on U tube for tearing down and putting the doors back together

https://no-click.mil/?https://youtu.be/RY3yXCjqkZE

Davidf · 07-01-2020, 12:19 PM

Quote:

Originally Posted by elkniks

Is the short piece of track for the widow regulator spot welded onto the inside of the door? I installed a P.O.S. power window kit years ago and had to remove the piece of track on the inside of the door and cut out the stop at the bottom of the door. I now want to go back to an original style regulator. I can fab a window stop but I am not sure about the short piece of track. I am not ruling out just finding a decent set of truck doors and cutting them. My drivers door has some serious rust in the back corner. Both of the doors I have now are cut truck doors.

The answer to your first question is yes.

elkniks · 07-01-2020, 02:43 PM

Yep, I was kind of figuring that since I could not find that piece of track online anywhere. Thanks!

06-30-2020, 11:56 PM	#1
elkniks Registered User Join Date: Mar 2015 Location: Seaside,CA Posts: 142	window track inside door Is the short piece of track for the widow regulator spot welded onto the inside of the door? I installed a P.O.S. power window kit years ago and had to remove the piece of track on the inside of the door and cut out the stop at the bottom of the door. I now want to go back to an original style regulator. I can fab a window stop but I am not sure about the short piece of track. I am not ruling out just finding a decent set of truck doors and cutting them. My drivers door has some serious rust in the back corner. Both of the doors I have now are cut truck doors.

07-01-2020, 02:06 AM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: window track inside door The rear track does bolt in, i have some for sale if needed, send me a PM if interested.

07-01-2020, 07:03 AM	#3
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: window track inside door there is a good video on U tube for tearing down and putting the doors back together https://no-click.mil/?https://youtu.be/RY3yXCjqkZE __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

07-01-2020, 02:43 PM	#5
elkniks Registered User Join Date: Mar 2015 Location: Seaside,CA Posts: 142	Re: window track inside door Yep, I was kind of figuring that since I could not find that piece of track online anywhere. Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.