The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > General Discussion

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-30-2018, 08:54 PM   #1
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Thumbs up OCC Chopper build

Here is my latest other toy adventure.

I started out with just one to build for me to ride at the beach. Well that soon got followed by another then another and then 1 for my grandson too!

Mine I have raked it and added 40" forks to it, disc brakes to both wheels. I put the biggest rotor I could find on it.
I bought handle bars and nice grips, along with a banana seat and had the sissy bar made at work. I just swapped out the rear wheel assembly for a 7 speed assembly and bought a old school shifter for it. I hope to have it ready to ride by my son's wedding in September at the beach.
I bought a Mongoose a few weeks ago for $40.00 that had the 7 speed back assembly. I robbed it all off that bike for mine.
You can see how much rake I put in mine compared to the other one, they both have the same length forks just no rake in the one on the left.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-30-2018, 08:55 PM   #2
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

My next step will be this for the rear tire on the other chopper. Not the girl guys the wheel set up!

__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-30-2018, 08:58 PM   #3
mongocanfly
Senior Member
 
Join Date: May 2015
Location: Alabama
Posts: 6,826
Re: OCC Chopper build

I bet that big tire won't be any fun to pedal...
__________________
Mongo...aka Greg

1981 c30 lq9 nv4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
1955.1 ls3 tr6060...(under construction)(on hold)
2013 gmc z71. (daily driver)
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
mongocanfly is offline   Reply With Quote
Old 07-30-2018, 09:23 PM   #4
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

Quote:
Originally Posted by mongocanfly View Post
I bet that big tire won't be any fun to pedal...
With the right sprocket it will be ok at the beach. I want be pulling no hills that' for sure!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-31-2018, 09:05 AM   #5
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Thumbs up Re: OCC Chopper build

Talking to friend at work today and he has a set of v rod motor cycle wheels he wants $200.00 for them. Brand new never been on the street. Says they are perfect condition.
He is going to get pictures this weekend for me. I maybe getting a real fat tire build going sooner than I thought!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 07-31-2018, 09:01 PM   #6
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Re: OCC Chopper build

I got the rear derailer on and the shifter mounted. I have to get a master link to add more chain though. It's getting there.

Oh I found another bike today also. Going to look at it this weekend while at the beach. It's a PHAT CYCLE with 7 speeds.
If I buy it I'll use the spring forks for a pattern to make ones for the OCC bike.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-01-2018, 02:07 AM   #7
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 2,226
Re: OCC Chopper build

I guess function follows form today.
franken is offline   Reply With Quote
Old 08-03-2018, 06:23 PM   #8
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

Well I finally got time to finish it. I got 6 speeds out of the 5 speed shifter. It has a 7 speed gear set. I happy though I can actually ride it up my drive way now. It really going to be nice at the beach!
Attached Images
    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-04-2018, 12:09 AM   #9
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 21,695
Re: OCC Chopper build

Dang Andy! You're worse than me, you have like 3 hobbies!
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 08-04-2018, 02:57 PM   #10
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

Quote:
Originally Posted by 67ChevyRedneck View Post
Dang Andy! You're worse than me, you have like 3 hobbies!
Three! Trucks, cars, golf carts, pedal cars, bikes, hot wheels, model cars rc cars & trucks. If it has wheels I'm into it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-05-2018, 12:30 PM   #11
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

I made a hydrate bottle holder for the bike and tweaked on the rear disc brakes. The rear brakes where rubbing and stopping the rear tire when coasting. It's free now.
Attached Images
   
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Last edited by Andy4639; 08-05-2018 at 12:41 PM.
Andy4639 is offline   Reply With Quote
Old 08-10-2018, 04:45 PM   #12
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

I ordered a set of polished triple tree hangers for the bike. These are 4" wide so the fat tire want scrub no more up front. Going to look good on the OCC!

Got them from Sutter Street Custom in old town Folsom!

The picture shows the forks also but I only ordered the mounts.
Attached Images
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-13-2018, 09:03 PM   #13
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Thumbs up Re: OCC Chopper build

I got the tree today and the old stingray 5 speed shifter should be here Friday.
Going to take the shifter a part and cut it and add to it so it looks like a Suicide Shifter!
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-15-2018, 06:30 AM   #14
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

I installed the billet tree last night. Got to do some tweaking on it but it's a lot heavier now and more stable.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-18-2018, 06:15 PM   #15
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

I drilled the front left fork and hid the front brake cable inside the fork then mounted the front fender, then I took it all back a part and painted the forks.
I redid the tree's also. I put new bearing and seals in them made it steer a whole lot better.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 08-26-2018, 03:09 PM   #16
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Thumbs up Re: OCC Chopper build

Been busy. Got both bikes running 7 speeds with 5 speed shifters installed. Got both bikes kickstands done as well. These bikes are so much better with the gears added.
Attached Images
     
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-14-2018, 05:30 PM   #17
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

7 speed chopper mod!

Waiting on the storm to hit.
Attached Images
  
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-15-2018, 06:54 PM   #18
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Talking Re: OCC Chopper build

I had stickers made for the gear shifter. The schwinn turned out to big but the 7 speed was perfect!
Going to have the Schwinn redone.
Attached Images
   
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-16-2018, 08:57 PM   #19
Stormin08
Registered User
 
Stormin08's Avatar
 
Join Date: Sep 2018
Location: Moss Bluff, LA
Posts: 93
Re: OCC Chopper build

Cool build, i have a West Coast Chopper bicycle...will be converting to a gas motor
Attached Images
 
Stormin08 is offline   Reply With Quote
Old 09-16-2018, 11:13 PM   #20
Andy4639
Orignal Goof member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 16,671
Thumbs up Re: OCC Chopper build

Quote:
Originally Posted by Stormin08 View Post
Cool build, i have a West Coast Chopper bicycle...will be converting to a gas motor
I'm thinking about doing mine as well. I've been talking to Jim Wilson at pedal choppers.


https://www.pedalchopper.com/customer-builds/
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com