55.2-59 329354 RH spindle question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MALIBLOC · 05-19-2020, 08:57 PM

To achieve the slammer look I like in my truck I’ve had to bottom out my coil overs and let’s just say the ride is ok and I get a loud knock when I hit a pot hole , so I called CPP and I’m looking for a 2-2.5” drop spindle so I get get the lowered look but get some bump out of my suspension! So the numbers come back as a G-body spindle or a camaro spindle , so I’m assuming I just buy drop spindles for either and theyll work right or would the spindles off a factory c10 work minus the fact that I need a 5x4.75 bolt pattern
Curious as too what some of you are running .

MALIBLOC · 05-20-2020, 09:29 AM

bump

mr48chev · 05-20-2020, 07:56 PM

C 10 is an entirely different spindle than the G body.S-10. Camaro never used the Metric spindle or that G body and S 10 use. They used the same as B body though 81 and then went to struts in 82 and ran metric rotors and calipers.

**joedoh** · 05-21-2020, 12:25 AM

thats not g body its gm intermediate which does share with the second gen camaro. it probably came back as monte carlo which is g body in later form but intermediate early.

mr48chev · 05-21-2020, 01:52 AM

Dang, I knew that tool 73/77 Chevelle, Regal, Cutlass and Tempest. I've swapped front end parts from those to the second gen Camaros more than once when we had to use wrecking yard parts rather than new parts.

Camaros never went to the G body/S-10 A arms or spindles.

The dirt track brigade mixes and matches some pieces to use the B body 12 inch rotors on G bodies but it isn't viable for a street rig.

MALIBLOC · 05-21-2020, 10:07 PM

Joedoh, so that means I can use these right , I can't get my hands or eyes on them due to covid, but I can will call them and Im pretty confident they will work

https://www.classicindustries.com/product/7078ds.html

**joedoh** · 05-22-2020, 12:23 AM

if 329354 is the number on your spindle, those should work.

05-19-2020, 08:57 PM	#1
MALIBLOC Registered User Join Date: Oct 2019 Location: Tustin CA Posts: 89	Drop spindles for 1955 2nd series To achieve the slammer look I like in my truck I’ve had to bottom out my coil overs and let’s just say the ride is ok and I get a loud knock when I hit a pot hole , so I called CPP and I’m looking for a 2-2.5” drop spindle so I get get the lowered look but get some bump out of my suspension! So the numbers come back as a G-body spindle or a camaro spindle , so I’m assuming I just buy drop spindles for either and theyll work right or would the spindles off a factory c10 work minus the fact that I need a 5x4.75 bolt pattern Curious as too what some of you are running . Attached Images Last edited by MALIBLOC; 05-20-2020 at 09:30 AM. Reason: Spelling error

05-20-2020, 09:29 AM	#2
MALIBLOC Registered User Join Date: Oct 2019 Location: Tustin CA Posts: 89	Drop Spindle for 1955 2nd series IFS bump

05-20-2020, 07:56 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,265	Re: 329354 RH spindle question C 10 is an entirely different spindle than the G body.S-10. Camaro never used the Metric spindle or that G body and S 10 use. They used the same as B body though 81 and then went to struts in 82 and ran metric rotors and calipers. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-21-2020, 12:25 AM	#4
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,746	Re: 329354 RH spindle question thats not g body its gm intermediate which does share with the second gen camaro. it probably came back as monte carlo which is g body in later form but intermediate early. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

05-21-2020, 01:52 AM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,265	Re: 329354 RH spindle question Dang, I knew that tool 73/77 Chevelle, Regal, Cutlass and Tempest. I've swapped front end parts from those to the second gen Camaros more than once when we had to use wrecking yard parts rather than new parts. Camaros never went to the G body/S-10 A arms or spindles. The dirt track brigade mixes and matches some pieces to use the B body 12 inch rotors on G bodies but it isn't viable for a street rig. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-21-2020, 10:07 PM	#6
MALIBLOC Registered User Join Date: Oct 2019 Location: Tustin CA Posts: 89	Re: 329354 RH spindle question Joedoh, so that means I can use these right , I can't get my hands or eyes on them due to covid, but I can will call them and Im pretty confident they will work https://www.classicindustries.com/product/7078ds.html Last edited by MALIBLOC; 05-21-2020 at 10:07 PM. Reason: added link

05-22-2020, 12:23 AM	#7
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,746	Re: 329354 RH spindle question if 329354 is the number on your spindle, those should work. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.