LS1 into a 73 cheyenne - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokedat · 06-11-2010, 12:34 AM

Update started on the body work, took this down to bare metal, will shoot Valspar direct to metal and rage extreme for body filler

68 TT · 06-11-2010, 11:29 AM

Quote:

Originally Posted by smokedat

Update started on the body work, took this down to bare metal, will shoot Valspar direct to metal and rage extreme for body filler

It's about time you got back to work

Great progress. Keep up the good work. That engine bay is looking great.

smokedat · 06-16-2010, 08:05 PM

Here are a few pics of the progress. The bottom belly and the frame where painted using valspar self etch primer then a pass with PCL then shot with a single stage valspar vivid blue purl. Frame was dusty when pics were taken

smokedat · 06-16-2010, 08:09 PM

Body is 100% rust free and all extrior trim holes have been plugd, here are some pics of the body. I used a a 40 grit first to chew the paint offf then hit it with an 80.

smokedat · 06-16-2010, 08:18 PM

finally spreaded sum mud. For the body filler i used rage extreme.My bad for the phone pics all i had

**nlped** · 06-16-2010, 09:50 PM

Nice!!!

kvn1011 · 06-16-2010, 09:50 PM

Lookin good!

jonsy · 06-23-2010, 04:19 PM

Any more progress ?

mcbassin · 06-23-2010, 07:39 PM

Very nice progress! I like the frame paint! SweeT!

smokedat · 06-25-2010, 01:36 AM

Quote:

Originally Posted by jonsy

Any more progress ?

Still stuck on the bed blocking to perfection, and in the bed floor and sides I am taking it down to metal getting rid of the texture. Il post pics of this later

smokedat · 06-25-2010, 01:37 AM

Quote:

Originally Posted by mcbassin

Very nice progress! I like the frame paint! SweeT!

thanks

smokedat · 07-04-2010, 01:25 PM

Finally got to spray the fenders

smokedat · 07-04-2010, 01:27 PM

got some mudd on the fire wall

smokedat · 07-04-2010, 01:28 PM

progress on the bed

mcbassin · 07-04-2010, 02:29 PM

Awww, the sweet smell body filler! good progress!

menace121978 · 07-04-2010, 05:12 PM

nice progress buddy! keep it up!!

87chevy.com · 07-05-2010, 12:38 AM

man i wish i had the time and place to do what your doing to your square. heck i would just settle for a good paint job

nice job... but seriously after taking photos with the d700... the cell phone pix just dont work for me.. lol

smokedat · 07-05-2010, 04:54 PM

I second that the power of the D700 is awsome

Quote:

Originally Posted by 87chevy.com

man i wish i had the time and place to do what your doing to your square. heck i would just settle for a good paint job

nice job... but seriously after taking photos with the d700... the cell phone pix just dont work for me.. lol

justpball · 07-06-2010, 10:40 AM

looking good!

smokedat · 07-18-2010, 11:49 PM

Update.. The fire wall and the outside of the bed are just about finished, the inside of the bed and cab are just sprayd but i still need more work.

**nlped** · 07-19-2010, 12:00 AM

Sweet!!! It's comin' along!

kvn1011 · 07-19-2010, 12:52 AM

Quote:

Originally Posted by nlped

Sweet!!! It's comin' along!

yes it is!! and that firewall looks good too!!!

menace121978 · 07-19-2010, 07:34 AM

firewall looks sweet! nice progress man

Jonboy · 07-19-2010, 09:40 AM

It's really looking good. Are you going to shave the cab seam too?

mcbassin · 07-19-2010, 11:13 AM

Very nice work on the body! I can understand what it takes to get it to this point. I just finished my son's paint and it took forever.

06-11-2010, 12:34 AM	#251
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Update started on the body work, took this down to bare metal, will shoot Valspar direct to metal and rage extreme for body filler

06-16-2010, 08:05 PM	#253
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Here are a few pics of the progress. The bottom belly and the frame where painted using valspar self etch primer then a pass with PCL then shot with a single stage valspar vivid blue purl. Frame was dusty when pics were taken Attached Images Last edited by smokedat; 06-16-2010 at 08:21 PM.

06-16-2010, 08:09 PM	#254
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Body is 100% rust free and all extrior trim holes have been plugd, here are some pics of the body. I used a a 40 grit first to chew the paint offf then hit it with an 80. Attached Images

06-16-2010, 08:18 PM	#255
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne finally spreaded sum mud. For the body filler i used rage extreme.My bad for the phone pics all i had Attached Images Last edited by smokedat; 06-16-2010 at 08:20 PM.

06-16-2010, 09:50 PM	#256
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: LS1 into a 73 cheyenne Nice!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

06-16-2010, 09:50 PM	#257
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: LS1 into a 73 cheyenne Lookin good!

06-23-2010, 04:19 PM	#258
jonsy Registered User Join Date: May 2010 Location: albany n.y. Posts: 16	Re: LS1 into a 73 cheyenne Any more progress ?

06-23-2010, 07:39 PM	#259
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Very nice progress! I like the frame paint! SweeT! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-04-2010, 01:25 PM	#262
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Finally got to spray the fenders Attached Images

07-04-2010, 01:27 PM	#263
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne got some mudd on the fire wall Attached Images

07-04-2010, 01:28 PM	#264
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne progress on the bed Attached Images Last edited by smokedat; 07-04-2010 at 01:30 PM.

07-04-2010, 02:29 PM	#265
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Awww, the sweet smell body filler! good progress! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-04-2010, 05:12 PM	#266
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne nice progress buddy! keep it up!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-05-2010, 12:38 AM	#267
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,255	Re: LS1 into a 73 cheyenne man i wish i had the time and place to do what your doing to your square. heck i would just settle for a good paint job nice job... but seriously after taking photos with the d700... the cell phone pix just dont work for me.. lol __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

07-06-2010, 10:40 AM	#269
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: LS1 into a 73 cheyenne looking good! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055



Register or Log In To remove these advertisements.

07-18-2010, 11:49 PM	#270
smokedat Registered User Join Date: Nov 2009 Location: santa paula Ca Posts: 772	Re: LS1 into a 73 cheyenne Update.. The fire wall and the outside of the bed are just about finished, the inside of the bed and cab are just sprayd but i still need more work. Attached Images

07-19-2010, 12:00 AM	#271
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: LS1 into a 73 cheyenne Sweet!!! It's comin' along! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-19-2010, 07:34 AM	#273
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: LS1 into a 73 cheyenne firewall looks sweet! nice progress man __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

07-19-2010, 09:40 AM	#274
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: LS1 into a 73 cheyenne It's really looking good. Are you going to shave the cab seam too? __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-19-2010, 11:13 AM	#275
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: LS1 into a 73 cheyenne Very nice work on the body! I can understand what it takes to get it to this point. I just finished my son's paint and it took forever. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.