|
01-13-2002, 11:36 AM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: comox, british columbia
Posts: 110
|
77 chev hp?
Does anyone know what or where I can find out the original stock hp of the 1977 chevy 3/4 ton trucks with the 350?
__________________
70 C-10 350 with weind intake,eldelbrock carb,HEI,305 heads,a mild cam. also a blazer tank w/bed fill,shaved stake pockets and tailgate |
|
|
|
01-13-2002, 08:02 PM
|
#2 |
|
Vortec 350's Suck
Join Date: Nov 2000
Location: Pickardville Alberta Canada
Posts: 544
|
I assume its a 4 bbl, which means its 165hp@3800 rpm
260 lb ft torque@2400 rpm ------------------ 69 CST 10, 402, steel crank, heavy rods, Federal Mogul Forged Pistons, 9.9:1 compression, polished ported 781 heads 2.19/1.88 manley stainless valves, Crane Powermax Hydraulic roller 288/296 and .587,.610 lift, hardened pushrods, Crane Roller Rockers, Weiand Action Plus, 750CFM Rochester QJET, MSD HEI, MSD 8MM Wires, Dynomax Ceramic coated headers, should be about 500 H.P. 700R4 2500 stall, pretty nasty shift kit, 373 Auburn Pro Series Posi, buckets/console air/tilt/tach 4wheel discs Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, loaded, 350 Accel filter/cap/rotor/coil/MSD wires/AC Delco RapidFire plugs, Edelbrock intake and headers, 180 degree thermostat, Hypertech Thermomaster Chip, true duals 700R4 with B@M Shift Kit for now!
__________________
69 Chev CST 10 reg cab lwb Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, K.I.A 7:51 AM 04/22/03 Will be resurrected |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
