NY Parting a '72 Blazer 4x4 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*mrdana60* · 12-23-2011, 05:35 PM

not alot riht now. about sold all my extra stuff. i m shopping for a complete 4wd frame right now. if that dont work out. i will buy these from you

ORANGBLAZ · 12-23-2011, 06:36 PM

Quote:

Originally Posted by mrdana60

not alot riht now. about sold all my extra stuff. i m shopping for a complete 4wd frame right now. if that dont work out. i will buy these from you

Ok, LMK
Happy Holidays!

Skram · 01-20-2012, 09:40 PM

Hi, I'm looking for front left and right inner door panels? Front left and right seat backs? And 2 K5 Blazer emblems? Any possibilities? Thanks

ORANGBLAZ · 01-20-2012, 09:58 PM

Quote:

Originally Posted by Skram

Hi, I'm looking for front left and right inner door panels? Front left and right seat backs? And 2 K5 Blazer emblems? Any possibilities? Thanks

Sorry - no gots. : (

sam302psu · 01-21-2012, 09:35 AM

Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

**Ironhorse** · 01-21-2012, 10:13 AM

Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4.

ORANGBLAZ · 01-21-2012, 01:20 PM

Quote:

Originally Posted by sam302psu

Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

I do have a D44 out of another '72 Blazer. What do you need? Knuckles, caliper brackets, hubs?

ORANGBLAZ · 01-21-2012, 01:23 PM

Quote:

Originally Posted by Ironhorse

Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4.

Blazer was a 4-spd., but I do have some auto linkage sets, and a hi-hump for a 4x4 with a TH350/NP205.

**DeadheadNM** · 01-21-2012, 01:23 PM

Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete

ORANGBLAZ · 01-21-2012, 01:27 PM

Quote:

Originally Posted by DeadheadNM

Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete

Hey Pete! I may, but it will take some digging.

**DeadheadNM** · 01-21-2012, 01:30 PM

Quote:

Originally Posted by ORANGBLAZ

Hey Pete! I may, but it will take some digging.

Keep me in mind and if you happen to turn a set up LMK. No rush. Plenty other stuff to work on at the moment. Thanks. Pete

huntfishride · 01-21-2012, 02:03 PM

How about front leaf springs? Price?
Posted via Mobile Device

ORANGBLAZ · 01-21-2012, 02:07 PM

Quote:

Originally Posted by huntfishride

How about front leaf springs? Price?
Posted via Mobile Device

Sorry, no springs.

**Ironhorse** · 01-21-2012, 04:35 PM

May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything?

ORANGBLAZ · 01-22-2012, 02:01 PM

Quote:

Originally Posted by Ironhorse

May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything?

Let me dig them out and make sure all the pieces are there.
Looking for a decent set of rear wheel tubs. If not, LMK what else you have.

**Ironhorse** · 01-22-2012, 06:18 PM

Can't help on a pair of decent rear wheel well tubs. Parting out a '70 3/4 ton 2wd CustomCamper but the tubs are pretty well beat. Factory a/c, most parts are there but engine side a/c housing has a chunk missing. Nice looking control unit, have to look if any arms broken. Are you looking for Blazer only or pickup parts also? Let me know on the 4x4 auto shift linkage. Thanks.

sam302psu · 01-23-2012, 08:46 AM

Quote:

Originally Posted by ORANGBLAZ

I do have a D44 out of another '72 Blazer. What do you need? Knuckles, caliper brackets, hubs?

Yes! I would be interested in everything. What would you want for the all of that hardware?

ORANGBLAZ · 01-23-2012, 12:18 PM

Quote:

Originally Posted by sam302psu

Yes! I would be interested in everything. What would you want for the all of that hardware?

Let me get it apart and check the condition, and then we can deal.

**Ironhorse** · 01-24-2012, 06:07 PM

ORANGEBLAZ, Just checking with you to see if you had any luck in locating all the necessary pieces for 4x4 auto column linkage. If you do have it, up for any trades? Truck or Blazer only? Have a couple NICE Blazer dealer brochures if interested, really nice open 6 lug 4x4 rally caps, nice a/c control with all three cable and one broken arm, other items ...... what trips your trigger?

ORANGBLAZ · 01-24-2012, 07:05 PM

Quote:

Originally Posted by Ironhorse

ORANGEBLAZ, Just checking with you to see if you had any luck in locating all the necessary pieces for 4x4 auto column linkage. If you do have it, up for any trades? Truck or Blazer only? Have a couple NICE Blazer dealer brochures if interested, really nice open 6 lug 4x4 rally caps, nice a/c control with all three cable and one broken arm, other items ...... what trips your trigger?

I will dig through the shed tonight.
Truck or Blazer, always looking for stuff. What else ya got?

**Ironhorse** · 01-25-2012, 03:10 PM

Digging thru the parts stash found:
2 pair of 67-68 steel head light trim
'70 3/4 ton 2wd front sway bar, on the truck, all brkts, will need bushings
Aluminum bell housing GM #460486

Any luck finding the 4x4 linkage complete?

ORANGBLAZ · 01-25-2012, 04:51 PM

Quote:

Originally Posted by ironhorse

digging thru the parts stash found:
2 pair of 67-68 steel head light trim
'70 3/4 ton 2wd front sway bar, on the truck, all brkts, will need bushings
aluminum bell housing gm #460486

any luck finding the 4x4 linkage complete?

I found the rod and lever, and the bracket that bolts to the frame. Do you have the gear selector on the trans?
How many Blazer dealer brochures do you have?

Name: 001.jpg
Views: 154
Size: 47.8 KB

ORANGBLAZ · 01-25-2012, 04:53 PM

Quote:

Originally Posted by sam302psu

Yes! I would be interested in everything. What would you want for the all of that hardware?

I removed one side today and noticed that the dust shields are MIA. They were spot welded to the caliper brackets, but have rusted off. Do you still want them?

**Ironhorse** · 01-25-2012, 05:19 PM

ORANGEBLAZ, I need the complete setup to include the trans gear selector as starting from scratch and have nothing at all. Have two differant dealer brochures, one is for the '70 model, 8 pages, Blazer specific only, engine & frame & chassis pics, also interior options. The other is also '70, covers from Blazer, El Camino, 'Burbs and panels, van and big truck tilts, several truck/camper & 'Burb/travel trailer combination pics on back page. Both brochures are August, 69 print. Have several of the '70 Blazer specific brochure, 1 only of the Blazer to big truck brochure.

ORANGBLAZ · 01-25-2012, 05:33 PM

No prob, I will take it off the trans. How 'bout we swap for 1 Blazer brochure and the Blazer/ truck brochure?

12-23-2011, 05:35 PM	#126
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: Parting a '72 Blazer 4x4 not alot riht now. about sold all my extra stuff. i m shopping for a complete 4wd frame right now. if that dont work out. i will buy these from you

01-20-2012, 09:40 PM	#128
Skram Registered User Join Date: Sep 2011 Location: Minnesota Posts: 8	Re: Parting a '72 Blazer 4x4 Hi, I'm looking for front left and right inner door panels? Front left and right seat backs? And 2 K5 Blazer emblems? Any possibilities? Thanks

01-21-2012, 09:35 AM	#130
sam302psu Registered User Join Date: Nov 2011 Location: Chambersburg, PA Posts: 12	Re: Parting a '72 Blazer 4x4 Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

01-21-2012, 10:13 AM	#131
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-21-2012, 01:23 PM	#134
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,297	Re: Parting a '72 Blazer 4x4 Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-21-2012, 02:03 PM	#137
huntfishride Registered User Join Date: Nov 2011 Location: Cedar City, Utah Posts: 19	Re: Parting a '72 Blazer 4x4 How about front leaf springs? Price? Posted via Mobile Device

01-21-2012, 04:35 PM	#139
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-22-2012, 06:18 PM	#141
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 Can't help on a pair of decent rear wheel well tubs. Parting out a '70 3/4 ton 2wd CustomCamper but the tubs are pretty well beat. Factory a/c, most parts are there but engine side a/c housing has a chunk missing. Nice looking control unit, have to look if any arms broken. Are you looking for Blazer only or pickup parts also? Let me know on the 4x4 auto shift linkage. Thanks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-24-2012, 06:07 PM	#144
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 ORANGEBLAZ, Just checking with you to see if you had any luck in locating all the necessary pieces for 4x4 auto column linkage. If you do have it, up for any trades? Truck or Blazer only? Have a couple NICE Blazer dealer brochures if interested, really nice open 6 lug 4x4 rally caps, nice a/c control with all three cable and one broken arm, other items ...... what trips your trigger? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-25-2012, 03:10 PM	#146
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 Digging thru the parts stash found: 2 pair of 67-68 steel head light trim '70 3/4 ton 2wd front sway bar, on the truck, all brkts, will need bushings Aluminum bell housing GM #460486 Any luck finding the 4x4 linkage complete? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-25-2012, 05:19 PM	#149
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,057	Re: Parting a '72 Blazer 4x4 ORANGEBLAZ, I need the complete setup to include the trans gear selector as starting from scratch and have nothing at all. Have two differant dealer brochures, one is for the '70 model, 8 pages, Blazer specific only, engine & frame & chassis pics, also interior options. The other is also '70, covers from Blazer, El Camino, 'Burbs and panels, van and big truck tilts, several truck/camper & 'Burb/travel trailer combination pics on back page. Both brochures are August, 69 print. Have several of the '70 Blazer specific brochure, 1 only of the Blazer to big truck brochure. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-25-2012, 05:33 PM	#150
ORANGBLAZ Registered User Join Date: Jun 2010 Location: Cairo,NY Posts: 353	Re: Parting a '72 Blazer 4x4 No prob, I will take it off the trans. How 'bout we swap for 1 Blazer brochure and the Blazer/ truck brochure?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.