I know throttle cable end?? what I need, I just don't know what it's called.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jcblue · 10-24-2015, 07:52 PM

The carpet and mat in my truck has restricted some of my throttle travel.. I'm wanting a "shim" of sorts between my pedal and end of the cable, so as to choke up on the cable and pull the peddle up off the carpet some. I'm just not sure what to look for.. Will attach pic

jcblue · 10-24-2015, 07:55 PM

How much I want the peddle off the floor

firedemon · 10-24-2015, 08:01 PM

I have never seen a spacer on the cable not that there isn't such a thing but I have seen an adjustable cable bracket on the engine that could move the cable back maybe summit or jegs

chipflyer · 10-24-2015, 08:16 PM

Cut the current clamp off and get a cable "knarp" at a bike shop.

Jeff

swamp rat · 10-24-2015, 08:22 PM

I cut the end off of my cable and used an adjustable cable stop.

http://www.oreillyauto.com/site/c/se...0263/C0142.oap

Google it for more pictures. Pass the cable thru the holes on the side then screw it tight.

chipflyer · 10-24-2015, 08:26 PM

That is technically a knarp! Lot of hardware stores will have them too.

Sklptrljay · 10-24-2015, 09:08 PM

Go to the hardware store to the area where they have chain, rope, cable, etc....
They should have crimp-able connectors for small cable that will allow you to shorten yours up.

**Boog** · 10-24-2015, 09:15 PM

A fishing line split shot would be easy enough to use. No special tool needed. Or just bend the pedal end upward a little bit. Grab hold of the top end and pull up on the bottom end to bend it. Or remove it and put it in a vise to hold it while you bend it.

A knarp huh? I've never heard of that.

swamp rat · 10-24-2015, 09:42 PM

Quote:

Originally Posted by chipflyer

That is technically a knarp! Lot of hardware stores will have them too.

I was typing the reply and finding links when you posted..

10-24-2015, 07:52 PM	#1
jcblue Registered User Join Date: Aug 2007 Location: Elkton, ky Posts: 385	I know throttle cable end?? what I need, I just don't know what it's called.. The carpet and mat in my truck has restricted some of my throttle travel.. I'm wanting a "shim" of sorts between my pedal and end of the cable, so as to choke up on the cable and pull the peddle up off the carpet some. I'm just not sure what to look for.. Will attach pic Attached Images

10-24-2015, 07:55 PM	#2
jcblue Registered User Join Date: Aug 2007 Location: Elkton, ky Posts: 385	Re: I know throttle cable end?? what I need, I just don't know what it's called.. How much I want the peddle off the floor Attached Images

10-24-2015, 08:01 PM	#3
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: I know throttle cable end?? what I need, I just don't know what it's called.. I have never seen a spacer on the cable not that there isn't such a thing but I have seen an adjustable cable bracket on the engine that could move the cable back maybe summit or jegs

10-24-2015, 08:16 PM	#4
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: I know throttle cable end?? what I need, I just don't know what it's called.. Cut the current clamp off and get a cable "knarp" at a bike shop. Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

10-24-2015, 08:22 PM	#5
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: I know throttle cable end?? what I need, I just don't know what it's called.. I cut the end off of my cable and used an adjustable cable stop. http://www.oreillyauto.com/site/c/se...0263/C0142.oap Google it for more pictures. Pass the cable thru the holes on the side then screw it tight. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

10-24-2015, 08:26 PM	#6
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: I know throttle cable end?? what I need, I just don't know what it's called.. That is technically a knarp! Lot of hardware stores will have them too. __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

10-24-2015, 09:08 PM	#7
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: I know throttle cable end?? what I need, I just don't know what it's called.. Go to the hardware store to the area where they have chain, rope, cable, etc.... They should have crimp-able connectors for small cable that will allow you to shorten yours up. __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy

10-24-2015, 09:15 PM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 12,957	Re: I know throttle cable end?? what I need, I just don't know what it's called.. A fishing line split shot would be easy enough to use. No special tool needed. Or just bend the pedal end upward a little bit. Grab hold of the top end and pull up on the bottom end to bend it. Or remove it and put it in a vise to hold it while you bend it. A knarp huh? I've never heard of that. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.