Canada window frames, doors and hoods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

padresag · 05-29-2018, 02:01 AM

rear suburban slider frames and weather strip sets for 4 of each
400.00us for all plus shipping. good shape plus painted

ron

padresag · 05-29-2018, 02:08 AM

2 64- 66 doors, there is a little rust on the bottom not bad. took these off a truck that I parted out about 10 years ago. looking closer i see that they have both been worked on
150.00each us + shipping

ron

padresag · 05-29-2018, 02:13 AM

upper hatch door. little rust on the folded over seam on the bottom inner edge of door
225.00 us = shipping

ron

padresag · 05-29-2018, 02:15 AM

1 64- 66 pass door bare passenger side
125 us + shipping

ron

padresag · 05-29-2018, 02:33 AM

1 64 -66 drivers side door with a few mirror holes a bit of rust on the bottom
125.00 + shipping

ron

**pimpston65** · 05-29-2018, 07:19 AM

i'll take the 4 slider frame combo.

**pimpston65** · 05-29-2018, 07:29 AM

any suburban rear wheel arches around?

padresag · 05-29-2018, 11:58 AM

Quote:

Originally Posted by pimpston65

i'll take the 4 slider frame combo.

thank you will check for shipping. see that you edited out the doors is that correct, no problem with that. will post the rear wheel arches in a bit
ron

padresag · 05-29-2018, 12:11 PM

1 pic is drivers side and tubs are good also as they were covered their whole life. from an ambulance
2 and 3 are pass side

if there is anything of any use to you i can cut out whatever you need
ron

padresag · 05-29-2018, 12:15 PM

2 gmc hoods 155.00 us each. they both need a little work

ron

**pimpston65** · 05-29-2018, 03:18 PM

Quote:

Originally Posted by padresag

thank you will check for shipping. see that you edited out the doors is that correct, no problem with that. will post the rear wheel arches in a bit
ron

yes i did the edit. i need to cool my jets!

**pimpston65** · 05-29-2018, 03:22 PM

hows the corner after the arch on the drivers side quarter?

padresag · 05-29-2018, 03:27 PM

sold the corner awhile back
ron

jonsey · 05-29-2018, 09:47 PM

Hi Ron,
I'm north of you in Campbell river.
I'm looking for a drivers side door inside panel for a 64....do you have any?
I'm also looking for a wiper transmission rod....any chance on that?
Also need a set of west coast junior mirrors....just a stab in the dark.!
Thanks
Kevin

padresag · 05-29-2018, 10:09 PM

i can help you on the first 2 and possibly the 3rd if you have a pic of what you mean for sure by jr w coast. i do have a lot of parts for sale as well as my 4 x 4 panel. everything is to go. bought an older wooden boat in campbell river start of may

lots of ads in the next week or so.
moving to saward 1st week of july

ron

jonsey · 05-29-2018, 10:33 PM

Just like these.

**southern parts** · 05-29-2018, 10:43 PM

second on the window frames.
jonsey , I believe I`ve seen that truck.

jonsey · 05-29-2018, 11:07 PM

Lol!
I need a quick example!

padresag · 05-30-2018, 10:47 AM

will these do you

ron

padresag · 05-30-2018, 11:23 AM

the rest of it

sorry grabbed the wrong one. this is the drivers side one and has a little prang on upper left edge

ron

padresag · 05-30-2018, 11:28 AM

if any of you guys need anything just ask. there are a lot of things that will not get listed and as of june 30 they will be no more. just like jonsey asked and i have them. the worst that i can say is no
thanks
ron

jonsey · 05-30-2018, 12:08 PM

That is what I need.
Thanks Ron...ill take it all.
What's the price.
PM me please.

jonsey · 05-30-2018, 12:11 PM

Do you have a deluxe steering wheel...horn ring included

padresag · 05-30-2018, 12:48 PM

like this one which i pulled out of a 65 GMC

ron

jonsey · 05-30-2018, 12:51 PM

Yes sir. You have all the treasures!

05-29-2018, 02:01 AM	#1
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	window frames, doors and hoods rear suburban slider frames and weather strip sets for 4 of each 400.00us for all plus shipping. good shape plus painted ron

05-29-2018, 02:08 AM	#2
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods 2 64- 66 doors, there is a little rust on the bottom not bad. took these off a truck that I parted out about 10 years ago. looking closer i see that they have both been worked on 150.00each us + shipping ron Last edited by padresag; 05-31-2018 at 01:08 AM.

05-29-2018, 02:13 AM	#3
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods upper hatch door. little rust on the folded over seam on the bottom inner edge of door 225.00 us = shipping ron

05-29-2018, 02:15 AM	#4
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods 1 64- 66 pass door bare passenger side 125 us + shipping ron Last edited by padresag; 05-29-2018 at 02:22 AM.

05-29-2018, 02:33 AM	#5
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods 1 64 -66 drivers side door with a few mirror holes a bit of rust on the bottom 125.00 + shipping ron

05-29-2018, 07:19 AM	#6
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: window frames, doors and hoods i'll take the 4 slider frame combo. Last edited by pimpston65; 05-29-2018 at 07:27 AM.

05-29-2018, 07:29 AM	#7
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: window frames, doors and hoods any suburban rear wheel arches around?

05-29-2018, 12:11 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods 1 pic is drivers side and tubs are good also as they were covered their whole life. from an ambulance 2 and 3 are pass side if there is anything of any use to you i can cut out whatever you need ron Last edited by padresag; 05-29-2018 at 12:18 PM.

05-29-2018, 12:15 PM	#10
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods 2 gmc hoods 155.00 us each. they both need a little work ron Last edited by padresag; 05-31-2018 at 01:10 AM.

05-29-2018, 03:22 PM	#12
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: window frames, doors and hoods hows the corner after the arch on the drivers side quarter?

05-29-2018, 03:27 PM	#13
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods sold the corner awhile back ron

05-29-2018, 09:47 PM	#14
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods Hi Ron, I'm north of you in Campbell river. I'm looking for a drivers side door inside panel for a 64....do you have any? I'm also looking for a wiper transmission rod....any chance on that? Also need a set of west coast junior mirrors....just a stab in the dark.! Thanks Kevin

05-29-2018, 10:09 PM	#15
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods i can help you on the first 2 and possibly the 3rd if you have a pic of what you mean for sure by jr w coast. i do have a lot of parts for sale as well as my 4 x 4 panel. everything is to go. bought an older wooden boat in campbell river start of may lots of ads in the next week or so. moving to saward 1st week of july ron

05-29-2018, 10:33 PM	#16
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods Just like these. Attached Images

05-29-2018, 10:43 PM	#17
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,469	Re: window frames, doors and hoods second on the window frames. jonsey , I believe I`ve seen that truck.



Register or Log In To remove these advertisements.

05-29-2018, 11:07 PM	#18
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods Lol! I need a quick example!

05-30-2018, 10:47 AM	#19
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods will these do you ron

05-30-2018, 11:23 AM	#20
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods the rest of it sorry grabbed the wrong one. this is the drivers side one and has a little prang on upper left edge ron Last edited by padresag; 05-30-2018 at 11:37 AM.

05-30-2018, 11:28 AM	#21
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods if any of you guys need anything just ask. there are a lot of things that will not get listed and as of june 30 they will be no more. just like jonsey asked and i have them. the worst that i can say is no thanks ron

05-30-2018, 12:08 PM	#22
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods That is what I need. Thanks Ron...ill take it all. What's the price. PM me please.

05-30-2018, 12:11 PM	#23
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods Do you have a deluxe steering wheel...horn ring included

05-30-2018, 12:48 PM	#24
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: window frames, doors and hoods like this one which i pulled out of a 65 GMC ron

05-30-2018, 12:51 PM	#25
jonsey Registered User Join Date: Oct 2016 Location: campbell river B.C. Posts: 10	Re: window frames, doors and hoods Yes sir. You have all the treasures!

Register or Log In To remove these advertisements.