Lets see your Air Management Systems. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 07-18-2019, 12:31 AM

How did you set up your air tanks and compressors?

Are they accessible through the bed?

Bed lifts?

I want to see them all, good ideas and those that you regret for whatever reason.

EVRLET · 07-18-2019, 03:26 AM

Neatly tucked under the raised floor

WB72 · 07-25-2019, 10:28 PM

Quote:

Originally Posted by EVRLET

Neatly tucked under the raised floor

Nice Idea, How did you determine where the lift rams were to be placed?

Is it just a standard hinge? is the entire bed floor removable if you need to work on the system?

EVRLET · 07-26-2019, 02:05 AM

The gas shock placement had to do with height on opening and smooth operation on closing.

The hinge system is the same as a hard tonneau cover, but modified slightly for my application.

Yes, the floor is completely removable and I have used it as a picnic table once. One end stayed on the truck and I had two makeshift legs for the other side. I slid it out to where I needed it and had a good ol time at a truck meet.

Simple10 · 07-26-2019, 07:55 AM

I wanted an air ride set up on big red, until I was quoted starting price of 9k in Australia

07-18-2019, 12:31 AM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Lets see your Air Management Systems. How did you set up your air tanks and compressors? Are they accessible through the bed? Bed lifts? I want to see them all, good ideas and those that you regret for whatever reason. __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

07-18-2019, 03:26 AM	#2
EVRLET Registered User Join Date: Aug 2015 Location: Las Vegas NV Posts: 354	Re: Lets see your Air Management Systems. Neatly tucked under the raised floor Attached Images __________________ Customization is what you want it to look like -- not what other people think it should look like

07-26-2019, 02:05 AM	#4
EVRLET Registered User Join Date: Aug 2015 Location: Las Vegas NV Posts: 354	Re: Lets see your Air Management Systems. The gas shock placement had to do with height on opening and smooth operation on closing. The hinge system is the same as a hard tonneau cover, but modified slightly for my application. Yes, the floor is completely removable and I have used it as a picnic table once. One end stayed on the truck and I had two makeshift legs for the other side. I slid it out to where I needed it and had a good ol time at a truck meet. __________________ Customization is what you want it to look like -- not what other people think it should look like

07-26-2019, 07:55 AM	#5
Simple10 Registered User Join Date: Apr 2019 Location: Australia Posts: 72	Re: Lets see your Air Management Systems. I wanted an air ride set up on big red, until I was quoted starting price of 9k in Australia Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.