The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-31-2010, 11:53 AM   #1
kikkegek
Registered User
 
kikkegek's Avatar
 
Join Date: Aug 2010
Location: Netherlands, The Hague
Posts: 1,518
Door jamb switch: how does it work

hi guys,

the door switch on my driverside does not turn on the inside lights when I open the door. Today I pulled it out and it seems OK.

now, there are two wires connected to the switch. When I hold either of them against the chassis, the inside light will turn on.

So now I am guessin, this is how the switch works:
- you open the door.
- switch makes contact with the chassis.
- inside lights turn on

I tried to clean the contacts, rubs them a little with rubbingpaper (I dont know the right word for it, I am Dutch). But it didnt help.

now the switch seems all metal.

Can you guys explain to me how this switch works. So I can check it out?

it looks like this.
kikkegek is offline   Reply With Quote
Old 12-31-2010, 12:04 PM   #2
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: Door jamb switch: how does it work

I think it grounds the light when activated or door is opened. It sounds like your switch is bad, I think it is called the courtesy switch here, under $5 from LMC, might be able to get one local.....Oh wait your not local.

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=161
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 12-31-2010, 12:09 PM   #3
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
Re: Door jamb switch: how does it work

You may be able to pull one from the rear or the other door also.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 12-31-2010, 02:32 PM   #4
kikkegek
Registered User
 
kikkegek's Avatar
 
Join Date: Aug 2010
Location: Netherlands, The Hague
Posts: 1,518
Re: Door jamb switch: how does it work

Quote:
Originally Posted by Clyde65 View Post
I think it grounds the light when activated or door is opened. It sounds like your switch is bad, I think it is called the courtesy switch here, under $5 from LMC, might be able to get one local.....Oh wait your not local.

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=161
he thanks!

what I would like to know is does it ground by connecting the one wire to the other? or by the connection the switch makes to the chassis?
kikkegek is offline   Reply With Quote
Old 12-31-2010, 02:50 PM   #5
Restrorob
The One And Only !!!
 
Restrorob's Avatar
 
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
Re: Door jamb switch: how does it work

Quote:
Originally Posted by kikkegek View Post
by the connection the switch makes to the chassis?

You got it right there ^^^^^......

Make sure the threads in the cab/door jamb are free of rust/paint.
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz !


The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.


"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!

Last edited by Restrorob; 12-31-2010 at 02:51 PM.
Restrorob is offline   Reply With Quote
Old 12-31-2010, 02:56 PM   #6
kikkegek
Registered User
 
kikkegek's Avatar
 
Join Date: Aug 2010
Location: Netherlands, The Hague
Posts: 1,518
Re: Door jamb switch: how does it work

Thanks Restrorob I'll look into that in next year!
:-)
kikkegek is offline   Reply With Quote
Old 12-31-2010, 03:01 PM   #7
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
Re: Door jamb switch: how does it work

Its just the ground point for the lights. Each wire is a ground from a different light. The headlight switch also acts as a ground in the system to turn the dome lights on. The lights always have power and its the ground that is switched.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Old 12-31-2010, 03:20 PM   #8
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Door jamb switch: how does it work

Before you buy a new switch, try loosening or tightening the locknut and turning the switch in the hole a bit. Sometimes the wires get twisted and lose a good connection.
tucsonjwt is offline   Reply With Quote
Old 12-31-2010, 06:24 PM   #9
staggerd86c-10
Squarebody Aficionado
 
staggerd86c-10's Avatar
 
Join Date: May 2008
Location: Miami, FL
Posts: 713
Re: Door jamb switch: how does it work

Just twist it around it usually has some dirt or rust that messes up the contact grab the pin in spray some wd40 and turn it a bit. There isnt anything mechanical for it to go bad, very rare to find one th hat doesnt work.
Posted via Mobile Device
staggerd86c-10 is offline   Reply With Quote
Old 01-01-2011, 11:29 PM   #10
BigMike608
Registered User
 
BigMike608's Avatar
 
Join Date: Oct 2010
Location: Dallas, TX
Posts: 432
Re: Door jamb switch: how does it work

mine is doing the same thing, glad I came across this post!
__________________
1977 SWB C10 - "Woodson": 5.3 Vortec LS Swap, 4L60e Trans, 4.5/5 drop
BigMike608 is offline   Reply With Quote
Old 01-02-2011, 12:30 AM   #11
LivNLo94
Registered User
 
LivNLo94's Avatar
 
Join Date: Jun 2010
Location: Odessa TX
Posts: 83
Re: Door jamb switch: how does it work

i ordered a pair of these for my 85swb from classic industries. they fit a little losse in the original holes. any ideas on how to tighten them up a bit?
LivNLo94 is offline   Reply With Quote
Old 01-02-2011, 12:39 AM   #12
staggerd86c-10
Squarebody Aficionado
 
staggerd86c-10's Avatar
 
Join Date: May 2008
Location: Miami, FL
Posts: 713
Re: Door jamb switch: how does it work

You could find a jamb nut to put behind it or you can try to put something to thicken up the threads but it has to conduct electricty so the switch will still see ground
Posted via Mobile Device
staggerd86c-10 is offline   Reply With Quote
Old 01-02-2011, 12:58 AM   #13
LivNLo94
Registered User
 
LivNLo94's Avatar
 
Join Date: Jun 2010
Location: Odessa TX
Posts: 83
Re: Door jamb switch: how does it work

Quote:
Originally Posted by staggerd86c-10 View Post
You could find a jamb nut to put behind it or you can try to put something to thicken up the threads but it has to conduct electricty so the switch will still see ground
Posted via Mobile Device
how would i get the nut back there? i was thinking about aluminum foil or somthing, but thats kinda ghetto.
LivNLo94 is offline   Reply With Quote
Old 01-02-2011, 01:17 AM   #14
staggerd86c-10
Squarebody Aficionado
 
staggerd86c-10's Avatar
 
Join Date: May 2008
Location: Miami, FL
Posts: 713
Re: Door jamb switch: how does it work

Not 100% sure but I think if you remove the kick panel you will have access. I would like someone to chime in on this
Posted via Mobile Device
staggerd86c-10 is offline   Reply With Quote
Old 01-02-2011, 08:13 AM   #15
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Door jamb switch: how does it work

The switches should not be loose. There are different switches for different trucks - I think later model switches are actually plastic. I would double check to make sure that you have the correct switches. Also, try reinstalling your old switches - chances are they will work with a little silicone spray or WD 40 on the plunger and some cleaning/tightening of the contact surface and nut. Wiggle and push the switch, loosen/tighten the nut, with the door open once installed and see if the light works that way. You need to hold the threads tightly when you turn the nut or the whole switch will turn in the hole and twist/loosen the wires - easy mistake to make - ask me how I know LOL.
tucsonjwt is offline   Reply With Quote
Old 01-02-2011, 09:53 AM   #16
Restrorob
The One And Only !!!
 
Restrorob's Avatar
 
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
Re: Door jamb switch: how does it work

Quote:
Originally Posted by staggerd86c-10 View Post
Not 100% sure but I think if you remove the kick panel you will have access. I would like someone to chime in on this
Posted via Mobile Device

On my 74 there's no access hole behind the kick panel for installing a nut, It's solid sheet metal. But.... One could cut a access hole if need be and re-cover it with a larger piece using small sheet metal screws and some type sealer.
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz !


The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.


"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!

Last edited by Restrorob; 01-02-2011 at 10:46 AM.
Restrorob is offline   Reply With Quote
Old 01-02-2011, 10:18 AM   #17
motornut
78K & 79C Jimmys
 
motornut's Avatar
 
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
Re: Door jamb switch: how does it work

there is a black rubber gromment (bout an inch wide)going from inside the piller to the door switch ,holding the wire it's a white wire bonded to the grommet
look left of the e brake pull off and slightly above the hood popper(same area pass side too)
@ the door switch
the white is the dome light (going to ground lites the dome)
second is the key in ,door open buzzer wire
__________________
John
1978 GMCJimmy4X4-350/203
1979 GMCJimmy4X2-305/350

Last edited by motornut; 01-02-2011 at 10:23 AM.
motornut is offline   Reply With Quote
Old 01-02-2011, 01:04 PM   #18
kikkegek
Registered User
 
kikkegek's Avatar
 
Join Date: Aug 2010
Location: Netherlands, The Hague
Posts: 1,518
Re: Door jamb switch: how does it work

Quote:
Originally Posted by motornut View Post
there is a black rubber gromment (bout an inch wide)going from inside the piller to the door switch ,holding the wire it's a white wire bonded to the grommet
look left of the e brake pull off and slightly above the hood popper(same area pass side too)
@ the door switch
the white is the dome light (going to ground lites the dome)
second is the key in ,door open buzzer wire
He Motornut, thanks for the info.

is there a door open buzzer in my burb?

I'll check it tomorrow. thanks for the info.
kikkegek is offline   Reply With Quote
Old 01-02-2011, 10:11 PM   #19
motornut
78K & 79C Jimmys
 
motornut's Avatar
 
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
Re: Door jamb switch: how does it work

should be a buzzer when the key is left in or the headlights are on,
and the drivers door is opened
I for one, will remove the buzzzzzer somehow,snip, yank tug
__________________
John
1978 GMCJimmy4X4-350/203
1979 GMCJimmy4X2-305/350
motornut is offline   Reply With Quote
Old 01-16-2011, 10:38 AM   #20
kikkegek
Registered User
 
kikkegek's Avatar
 
Join Date: Aug 2010
Location: Netherlands, The Hague
Posts: 1,518
Re: Door jamb switch: how does it work

finally found some time and tried some of the advise you guys gave me.

I don know what did the trick. But I ended up switching the rear door switch and the front door switch...I also added some WD-40 while I was busy. I thought I would end up with a rear door not working and a front door working....but both doors and switches are now working.

so thanks guys...you really helped...

now the lights always go on...and the alarm is triggered when entering through any door...before the driver side door wouldnt trip it ofcourse...because the switch was not working....
kikkegek is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com