The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-21-2016, 02:00 PM   #51
Ta2Don
Registered User
 
Ta2Don's Avatar
 
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
Re: 1962 stepside project by realvc

Here are those part #'s and prices Brother!!! Merry Christmas!!!
Attached Images
 
__________________
DON
Proverbs 27:17
US Air Force Retarded errr Retired
My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920
My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266
My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD
Ta2Don is offline   Reply With Quote
Old 12-22-2016, 07:23 PM   #52
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Quote:
Originally Posted by Ta2Don View Post
Here are those part #'s and prices Brother!!! Merry Christmas!!!
Thanks Don, Some time down the road I'll be needing these.

The trans. is still sitting right where we put it the other day. I have made progress on getting ready to get ready to tear into the 82.

My welding table is back up right and on casters with the sides and back in place. I still have to get the shelf in it for storage.

I post a picture later.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 12-23-2016, 01:41 AM   #53
Grizz1963
Registered User
 
Grizz1963's Avatar
 
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,444
Re: 1962 stepside project by realvc

Quote:
Originally Posted by realvc View Post
Great having you and your wife come by for a while. Thanks for the transmission.

I got the welding table turned back upright and ready for the casters and called it a day.

Thanks too for the pics. Nothing like two grey beards and a shop full of projects.

Morning from Insomnialand Vince.

Great to see your little slice of Heaven.

Loved to see the lake.

Hard work certainly does not go unrewarded.

Have yourself a blessed Christmas and festive period.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside
MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.
Grizz1963 is offline   Reply With Quote
Old 12-25-2016, 08:34 PM   #54
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Quote:
Originally Posted by Grizz1963 View Post
Morning from Insomnialand Vince.

Great to see your little slice of Heaven.

Loved to see the lake.

Hard work certainly does not go unrewarded.

Have yourself a blessed Christmas and festive period.
Thanks Rian, have yourself a blessed Christmas as well.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 12-27-2016, 08:58 PM   #55
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Started tearing down the 82 today. Got the hood off, the radiator and fan shroud out and some other little nick nack things.

I'll get some pics. of the progress at another time.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 12-28-2016, 10:39 PM   #56
Ta2Don
Registered User
 
Ta2Don's Avatar
 
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
Re: 1962 stepside project by realvc

Where are the pics...
__________________
DON
Proverbs 27:17
US Air Force Retarded errr Retired
My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920
My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266
My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD
Ta2Don is offline   Reply With Quote
Old 12-29-2016, 05:47 PM   #57
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc


Progress on the tear down


More truck

Welding table rebuild in progress with new casters installed


parts removed in storage for now

More of the same just for Don.
As you can see the shop is not ready for company but it serves my purpose which is a great place to hang out with my stuff.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 12-29-2016, 05:57 PM   #58
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

[IMG]DSCF1520 by Vince Crawford, on Flickr[/IMG]

Cherry picker with new casters installed.

[IMG]DSCF1518 by Vince Crawford, on Flickr[/IMG]

Jeep on lift with vette parked underneath. Home made drip containment looking like it is working so far. Still need to get the trucks done so the vette won't have to worry about getting dripped on.

[IMG]DSCF1514 by Vince Crawford, on Flickr[/IMG]

Garage art for Rian aka Grizz.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 12-29-2016, 06:21 PM   #59
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

[IMG]DSCF1510 by Vince Crawford, on Flickr[/IMG]

Almost forgot, new to me 5 speed from Don aka Ta2Don. It is close to where it was unloaded last week, but now it is on a dolly, that's progress.

I may rename this build, My Shoestring Budget Build or Shade Tree Truck Build.

I call my shop "Shade Tree LLC, the LLC stands for Loafer and Liars Club.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-01-2017, 09:01 PM   #60
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

More progress on tear down and moving stuff around is the shop.
Got the core support off, the drive shaft out, power steering pump and alt. removed.

Also got the shelf set up for the welding table/mobile work bench project.

Found out my car dolley idea did not work so they are in the back of the 62 for now.

Some shots of the shop with the Jeep on the lift over the vette and the trucks waiting for more attention.
Attached Images
     
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-01-2017, 09:27 PM   #61
Ta2Don
Registered User
 
Ta2Don's Avatar
 
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
Re: 1962 stepside project by realvc

Looks Great Brother! Welding table is spot on!
__________________
DON
Proverbs 27:17
US Air Force Retarded errr Retired
My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920
My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266
My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD
Ta2Don is offline   Reply With Quote
Old 01-05-2017, 08:16 PM   #62
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

More progress. Got the engine out of the 82 on Tuesday and tore it down on Wednesday.
Today I tore down another 350 I've had on a stand for over 10 years. It has Brodix heads and is supposed to rebuilt and ready to go but I had some doubts so I took it apart to check it out.
It appears to have been rebuilt but there are some issues I want to follow up with the machine shop.
The internal parts look new and the valves look great too.
Attached Images
     
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-12-2017, 08:26 AM   #63
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

No new pictures at this time.

A few little things have been taken care of like removing some knick knacks off the 82 that might or might not be used on the 62. General cleaning up and picking up around the shop.

Have had to work on my daily driver (99 Z71) this week too. About every six months the throttle starts getting hard to mash and requires cleaning of the throttle body to free it up. Took care of that and cleaned up the lock assy. inside the passenger door that had also quit working. Everything looking and acting good.

Then yesterday as I was leaving the bank drive through I heard a squeak that was new. On further inspection it turned out to be the rear u joint.
I picked up some new ones from O'reilly's and installed them last night.

When I got back from the required road test the low coolant light was on and I could smell coolant. Checked under the hood and found the top rad. hose disconnected from the rad. and coolant all over everything. The hose clamp was slid about half way up the hose.

I had replaced the water pump back in July and not put the clamp back in place when I installed the hose. I could not believe that the hose had stayed on this long.

How is that for a crazy story? It's hard to believe that the hose had stayed in place without the clamp during all the miles I've driven since installing the water pump.

That is the way it goes at the "Shade Tree L.L.C."
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-13-2017, 06:10 PM   #64
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Got the 82 tore down further.
Removed the steering sector, steering column, power brake booster and master cyl. and the biggy got the front cross member with all the suspension and brakes out.

Feels like I got a lot done but still have a long, long ways to go.
Attached Images
   
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-14-2017, 01:51 PM   #65
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: 1962 stepside project by realvc

Been following along, like what you've been doing.
That hose staying on for so long is serious crazy luck.
Bomp is offline   Reply With Quote
Old 01-21-2017, 02:50 PM   #66
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

The progress is going slow.
I could not figure how to move the 82 with the cross member removed.
So I put it back in place using a couple of it's bolts and the front wheels.
I could move it with my jeep and come a long onto the lift.

Moved everything around and got the 82 up on the lift.
The is 62 where the 82 was the vette is back under the lift and the jeep now easier to get to and use down on the shop floor.

Now ready to take the 62 apart and start the upgrades/updates.
Attached Images
     
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-26-2017, 09:19 AM   #67
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Update of sorts.
The 62 is being taken apart very slowly due to rust. The core support mount on the passenger side under the battery was a bear as was the bumper.

Yesterday morning was spent in the kitchen replacing the water valve on the refrigerator for the ice maker and water disp.
A trip into town for a 5/16 to 5/16 coupling added more than an hour to that little job. In the end we have ice again and that makes my wife happy so I'm happy too.

A couple of pictures of said truck progress.
Attached Images
   
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 01-26-2017, 10:16 PM   #68
RDrancher
Registered User
 
RDrancher's Avatar
 
Join Date: Aug 2014
Location: Decatur, Texas
Posts: 673
Re: 1962 stepside project by realvc

Happy wife, happy life!
__________________
Romans 10:9 - The Truth
RDrancher is offline   Reply With Quote
Old 02-05-2017, 03:59 PM   #69
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Finally got the 235 out of the 62. It has been a long journey up to now with a very long way to go.
Next is removing the front suspension and steering sector, cleaning everything and start to rebuild and reassemble everything.

Finding a place to store everything until it is needed again takes some planning and a lot of moving stuff around.

Check out the hole in the bell housing in the last picture. The tin flywheel cover is all beat up and has a hole knocked in it from the inside out. Bet there was a racket when what ever happened happened.
Attached Images
    
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 02-05-2017, 04:10 PM   #70
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: 1962 stepside project by realvc

Amazing how sturdy bell housings are. Is that a hydraulic clutch?
Bomp is offline   Reply With Quote
Old 02-05-2017, 05:05 PM   #71
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Quote:
Originally Posted by Bomp View Post
Amazing how sturdy bell housings are. Is that a hydraulic clutch?
Yes it is. Seemed to still work pretty good too, what little I drove it before the tear down.

Great to hear from you Bomp.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Old 02-06-2017, 08:12 AM   #72
Ta2Don
Registered User
 
Ta2Don's Avatar
 
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
Re: 1962 stepside project by realvc

Nice Progress Brother! Bet that was a surprising noise... Will call you later today
__________________
DON
Proverbs 27:17
US Air Force Retarded errr Retired
My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920
My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266
My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD
Ta2Don is offline   Reply With Quote
Old 02-06-2017, 09:58 AM   #73
clemdaddy
Senior Member
 
clemdaddy's Avatar
 
Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,922
Re: 1962 stepside project by realvc

Morning Vince,
just read your build thread and i got to say you are doing it right. Almost everything from the 82 will make the 62 a better truck. the complete cradle will bolt in, power brakes and steering too. there will be a nice stepper in the shop when you're done. And your progress, well, it seems pretty fast to me.
clemdaddy is offline   Reply With Quote
Old 02-06-2017, 11:00 PM   #74
Vincenthdfan
Registered User
 
Join Date: Sep 2014
Location: Olympia, Washington
Posts: 172
Re: 1962 stepside project by realvc

Hi Vince, my name's Vince as well....and I too, own a '62!

So, I read through your thread with great interest, particularly interested in seeing how that front suspension assembly is going to go in from the '82.

I have my whole front clip removed right now to replace the old and tired original 283. I'm putting a brand new crate 350 in from Jegs.

Anyway...keep up the good work, I'll be following along for inspiration.
Attached Images
 
Vincenthdfan is offline   Reply With Quote
Old 02-07-2017, 10:41 AM   #75
realvc
Registered User
 
realvc's Avatar
 
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 413
Re: 1962 stepside project by realvc

Quote:
Originally Posted by Ta2Don View Post
Nice Progress Brother! Bet that was a surprising noise... Will call you later today
I count any progress as another step forward no matter how small.
__________________
Vince
Galatians 6:14
62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette

My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086
"If it's too loud, you're too old"
realvc is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com