Fender attachment hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Black_Sheep · 09-09-2018, 12:49 PM

What type of fastener is used in these holes on 59-59 models? Nothing was there when I dismantled the truck and I’m not finding it in the assembly manual.

TIA

_Ogre · 09-09-2018, 01:30 PM

can't quite tell what part you posted from that pic
90% of tf truck sheet metal bolts are 5/16'' flange bolts, like the bolt head i see in the pic above
found them at the bolt depot in zinc plated or stainless

_Ogre · 09-09-2018, 01:33 PM

is that the inside of the headlight bucket?
oem would be clutch head sheet metal screws

Black_Sheep · 09-09-2018, 03:25 PM

Quote:

Originally Posted by _Ogre

is that the inside of the headlight bucket?
oem would be clutch head sheet metal screws

I was asking about the screws for the fender to grille surround Ogre. The holes are stamped in such a way that it created a “thread”. I’ll find some pan head sheet metal screws, non clutch head though.

Thanks

b-mac · 09-10-2018, 11:27 AM

They look like the back of a speed-nut. About anything with coarse threads will do.

09-09-2018, 12:49 PM	#1
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Fender attachment hardware What type of fastener is used in these holes on 59-59 models? Nothing was there when I dismantled the truck and I’m not finding it in the assembly manual. TIA Attached Images __________________ Mark Brother's keeper - '58 Stepside build

09-09-2018, 01:30 PM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,667	Re: Fender attachment hardware can't quite tell what part you posted from that pic 90% of tf truck sheet metal bolts are 5/16'' flange bolts, like the bolt head i see in the pic above found them at the bolt depot in zinc plated or stainless __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

09-09-2018, 01:33 PM	#3
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,667	Re: Fender attachment hardware is that the inside of the headlight bucket? oem would be clutch head sheet metal screws __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

09-10-2018, 11:27 AM	#5
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 516	Re: Fender attachment hardware They look like the back of a speed-nut. About anything with coarse threads will do.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.