PA Believe it or not another 72 blazer w/ factory 3 sp. part out

[1rippen6]

Originally Posted by MikeCofield

Interested in the locking hub assembly's

Hubs 160 shipped
Knob 38 shipped or 30 in the box with the lockouts

[1rippen6]

Originally Posted by rayray767

Any of these?

Sorry it had truck doors cut down.

[1rippen6]

Originally Posted by DeadheadNM

Gas tank fuel neck?

Did you mean the fill tube on the body or the neck on the gas tank? Gas tank is gone.

[1rippen6]

Originally Posted by Harold Holbrook

How is the rear cross sill under tail gate, with the 2 brackets that go to the frame.

Cross sill and brackets are wasted.

[1rippen6]

Originally Posted by dirish

Looking for the "caps" on the doors. The ones that the window goes into at top of door, and by the door lock pull.
Thanks

LOL had to think about what you were talking about they are not just caps they are the back window tracks also. I have a couple but not perfect I can get pictures if still interested.

[1rippen6]

Originally Posted by smbrouss70

Interested in the gas tank fuel neck also. Does it have good latches in the hatch?

Latches don't more, once I get them out I will see if they are froze up or something else.

[1rippen6]

Originally Posted by best view

gas tank skid plate ken

no gas tank or skid plate

[bluek5]

Originally Posted by 1rippen6

LOL had to think about what you were talking about they are not just caps they are the back window tracks also. I have a couple but not perfect I can get pictures if still interested.

I think he was asking about these.

[1rippen6]

Originally Posted by bluek5

I think he was asking about these.

That's what I thought at first also but the door lock pull comment threw me off and then I remembered someone else asked me about the same thing a while back.

[bluek5]

The one by the door lock is probably this one.

[1rippen6]

Originally Posted by bluek5

The one by the door lock is probably this one.

Yes that's the one I'm talking about its not a cap its part of the back window channel.

[DeadheadNM]

Originally Posted by 1rippen6

Did you mean the fill tube on the body or the neck on the gas tank? Gas tank is gone.

Gas tank - sounds gone. Thanks anyway.

[Harold Holbrook]

Thanks, No Rush, if you come across this part let me know.

[dirish]

Originally Posted by 1rippen6

LOL had to think about what you were talking about they are not just caps they are the back window tracks also. I have a couple but not perfect I can get pictures if still interested.

Yes sir, thanks
Dan

[dirish]

Originally Posted by bluek5

The one by the door lock is probably this one.

That's it, also one for top of door,/window frame.
Thank you!

[waylonbud]

Hello, interested in the 3 spd shift linkage rods from the column and shifter arms on the side of the trans. Also need a set of saddles/ retaining caps or u-bolts that hold the rear of the driveshaft in the pinion yoke.
Shipped to 37303.
Thanks.

[WAYNE G.]

Dwayne, if you have not sold the np 205 knob yet I like to purchase. Thanks Wayne

[MikeCofield]

I'll take the knob and are there and dents or bad marks on the chrome part of the hubs? If not I'll take those too

[71GeneralMotorsCorp]

Needing the front tie-rod bar that connects the two outer tie rods to the spindles.. shipped to 66749. Thank you

[1rippen6]

Originally Posted by dirish

That's it, also one for top of door,/window frame.
Thank you!

I will get you some pictures of what I have.

Originally Posted by waylonbud

Hello, interested in the 3 spd shift linkage rods from the column and shifter arms on the side of the trans. Also need a set of saddles/ retaining caps or u-bolts that hold the rear of the driveshaft in the pinion yoke.
Shipped to 37303.
Thanks.

It had a 3 spd. on the floor installed but the other parts were in the back. Not sure if it is all there but I will get you some pictures.

Originally Posted by WAYNE G.

Dwayne, if you have not sold the np 205 knob yet I like to purchase. Thanks Wayne

Looks like Mike is going to take it.

Originally Posted by MikeCofield

I'll take the knob and are there and dents or bad marks on the chrome part of the hubs? If not I'll take those too

I will let you get better pictures of the chrome rings and let you decide.

Originally Posted by 71GeneralMotorsCorp

Needing the front tie-rod bar that connects the two outer tie rods to the spindles.. shipped to 66749. Thank you

I will check the condition.

[1rippen6]

Originally Posted by dirish

That's it, also one for top of door,/window frame.
Thank you!

Here are the pictures they didn't turn out so good I can get some better one's tomorrow. I also forgot the top cap I can get pictures of them tomorrow also.

[1rippen6]

Originally Posted by waylonbud

Hello, interested in the 3 spd shift linkage rods from the column and shifter arms on the side of the trans. Also need a set of saddles/ retaining caps or u-bolts that hold the rear of the driveshaft in the pinion yoke.
Shipped to 37303.
Thanks.

Here is what I have 50 plus shipping if interested I will get you a shipping quote.

[1rippen6]

Originally Posted by MikeCofield

I'll take the knob and are there and dents or bad marks on the chrome part of the hubs? If not I'll take those too

The left side has some issues the right doesn't appear too bad.

[1rippen6]

Originally Posted by 71GeneralMotorsCorp

Needing the front tie-rod bar that connects the two outer tie rods to the spindles.. shipped to 66749. Thank you

Rod is bent they must have done it when they pulled it out.

[71GeneralMotorsCorp]

Do you have another bar from another blazer that you are parting?