|
04-06-2007, 06:11 PM
|
#1 |
|
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,020
|
Bed dis-assembly
So,I'm taking the bed apart that I just bought so I can blast it and prime it all and get all the rust.So,about half the bolts are out now.The front panel is ready to come off.The wheel tub on the passenger side is ready to come off too.So....everything unbolts,no welds to grind off,correct?I just plan to remove the tubs from the floor,remove the side panels from the floor,and unbolt the front panel from the floor....This is a fun thing to do (not!).The bed is upside down and 90% of the bolts get loose and spin under there so I have to get under there and put vise grips on them to keep them from spinning.....Hopefully,I will have pics of the bed all apart by Sunday.
|
|
|
|
04-06-2007, 06:18 PM
|
#2 |
|
Senior Member
Join Date: Jan 2005
Location: Ontario, Kali
Posts: 2,427
|
Re: Bed dis-assembly
__________________
 '69 FleetIt ain't yours, if you didn't build it! |
|
|
|
|
04-06-2007, 11:13 PM
|
#3 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Bed dis-assembly
There are welds on the rear posts to the bed floor on the back rail/crossmember where the tailgate pivots are........sawzall them carefully
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
