Lets see some 1960 - 1966 engine bays - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vernski · 09-10-2011, 10:44 PM

GMC 230, Mercruiser boat cam, Clifford hot water heated intake, Edelbrock 1404 4V, Fenton cast iron headers....Vernski

**Captainfab** · 09-11-2011, 12:48 AM

Lookin good Vernski

Quote:

Originally Posted by Vernski

GMC 230, Mercruiser boat cam, Clifford hot water heated intake, Edelbrock 1404 4V, Fenton cast iron headers....Vernski

boucher racing · 09-11-2011, 11:56 AM

ChuckW · 09-12-2011, 04:52 PM

Comming together slooooowly

gearheads78 · 09-12-2011, 05:09 PM

Quote:

Originally Posted by ChuckW

Comming together slooooowly

Very nice...that air cleaner cost you as much as the motor?

Mechanic77 · 09-12-2011, 09:08 PM

Quote:

Originally Posted by boucher racing

Ok, that has to be the coolest six setup I've seen in one of our trucks

it looks all factory, and I just love that look......I couldn't of done it better myself

ChuckW · 09-12-2011, 09:32 PM

GH78.... close. I really wanted the double snorkel.... I like the looks of it. Found it at the Good Guys swap meet a couple of weeks ago. A bit different!

ChuckW · 09-12-2011, 09:45 PM

Love the look... Love that Turbo!!! Good JOB!!!

bobbylast · 09-14-2011, 12:18 PM

Quote:

Originally Posted by ChuckW

Comming together slooooowly

i love the pipes under the hood...are they block huggers? my headers hang down too far and the exhaust is visible from the profile. i want something like what you have to tuck em up in there a little tighter.

**jocko** · 09-14-2011, 01:04 PM

Quote:

Originally Posted by ChuckW

Comming together slooooowly

that's sweet! ala old L72 big block (can't touch one of those air cleaners for under a grand) or old eary 70's Z28. Very nice. I've been eyeballing the dual snorkel air cleaners at swap meets as well, can't seem to find much lately though. Your engine looks great - very clean, simple and functional. Jocko likey.

*sinnersahuayo* · 09-14-2011, 09:20 PM

350 from a 1971 mooneyes air cleaner

derail · 09-14-2011, 09:27 PM

Quote:

Originally Posted by sinnersahuayo

350 from a 1971 mooneyes air cleaner

Air cleaner is sweet! Not something you see everyday.

samuellg1977 · 09-14-2011, 10:58 PM

Here is mine... Junkyard 350 with all used Craigslist finds bolted together to make it go. Just as with all other projects, I have a "Plan B" (hanging from the brake booster

). Plans to clean it up and replace old parts with new as it needs repairs

. Someday, it should be real nice, but for now, i just drive it like a rental!!

Sam

A.T. RockDriller · 09-15-2011, 12:21 AM

Quote:

Originally Posted by jbgroby

Soon to be....in an engine bay.

What tranny is that....?

**LostMy65** · 09-15-2011, 12:52 AM

Quote:

Originally Posted by samuellg1977

Here is mine... Junkyard 350 with all used Craigslist finds bolted together to make it go. Just as with all other projects, I have a "Plan B" (hanging from the brake booster

). Plans to clean it up and replace old parts with new as it needs repairs

. Someday, it should be real nice, but for now, i just drive it like a rental!!

Sam

Anti-theft Grenade
Posted via Mobile Device

KroAutomotiveInc · 09-15-2011, 03:13 AM

jbgroby · 09-15-2011, 08:56 AM

Quote:

Originally Posted by A.T. RockDriller

What tranny is that....?

That is a 4 speed hydra-matic. it is supposed to be sorta rare, others told me so, although I really don't know how rare it is. I think the way it was explained to me was (kinda funny)

"It's so rare people think it's almost rumor"

1Bad62Pro/Street · 02-18-2012, 10:10 PM

3970010 350 1969 Corvette late 69, 4 bolt main (.30 over) - 355cid
Standard Cast Steel Crankshaft
Engine Works 135290H - Camshaft Hydraulic Dual Pattern
http://www.engine-worksperformance.c...PartNo=135290H
Lopey Idle - .445/.465 Lift
10.5:1 Compression Ratio
1968 Chevrolet Corvette
327 Double/Camel Hump
3917291 - 327 - 1968 Corvette - 350hp w/temp unit hole
New Springs – 1969 – Z28
New Stainless Valves
Manley 1.94 Int / 1.50Exh
Hardened Exh Seats
Setup to 490 Lift
New Retainers and Locks
New Guides

1Bad62Pro/Street - 1962 Chevy C-10 Stepside...

Sicboy · 02-18-2012, 10:23 PM

chemlab · 02-19-2012, 11:45 AM

i love that pbr lid, i've seen it on a few threads since you've picked it up. if i could find a micky's one i would do the same

Turkey · 02-19-2012, 03:26 PM

Name: DSC01888.jpg
Views: 2154
Size: 70.9 KB

Name: DSC01885.jpg
Views: 2170
Size: 71.2 KB

Chevysdominate · 02-21-2012, 10:41 PM

A little dirty but its been driven a lot lately.

**LostMy65** · 02-21-2012, 11:07 PM

Quote:

Originally Posted by Chevysdominate

A little dirty but its been driven a lot lately.

That's a nice engine bay!

I'm going to have to get me one of those.

"El Jalapeno 66" · 02-22-2012, 03:21 AM

350

65sbss · 02-25-2012, 10:42 PM

Here you go...

09-10-2011, 10:44 PM	#151
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: Lets see some 1960 - 1966 engine bays GMC 230, Mercruiser boat cam, Clifford hot water heated intake, Edelbrock 1404 4V, Fenton cast iron headers....Vernski Attached Images

09-11-2011, 11:56 AM	#153
boucher racing Registered User Join Date: Feb 2009 Location: Nashville TN Posts: 294	Re: Lets see some 1960 - 1966 engine bays __________________ Build Threads: "JED" 66 GMC C1000 http://inliners.org/ubbthreads/ubbth...1857#Post61857 "Cropwell" 66 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=587639

09-12-2011, 04:52 PM	#154
ChuckW Registered User Join Date: Mar 2011 Location: Alameda, CA. Posts: 173	Re: Lets see some 1960 - 1966 engine bays Comming together slooooowly Attached Images

09-12-2011, 09:32 PM	#157
ChuckW Registered User Join Date: Mar 2011 Location: Alameda, CA. Posts: 173	Re: Lets see some 1960 - 1966 engine bays GH78.... close. I really wanted the double snorkel.... I like the looks of it. Found it at the Good Guys swap meet a couple of weeks ago. A bit different!

09-12-2011, 09:45 PM	#158
ChuckW Registered User Join Date: Mar 2011 Location: Alameda, CA. Posts: 173	Re: Lets see some 1960 - 1966 engine bays Love the look... Love that Turbo!!! Good JOB!!!

09-14-2011, 09:20 PM	#161
sinnersahuayo Account Suspended Join Date: May 2011 Location: Bremerton Posts: 93	Re: Lets see some 1960 - 1966 engine bays 350 from a 1971 mooneyes air cleaner Attached Images

09-14-2011, 10:58 PM	#163
samuellg1977 Registered User Join Date: Jul 2011 Location: Oak Grove, Kentucky Posts: 226	Re: Lets see some 1960 - 1966 engine bays Here is mine... Junkyard 350 with all used Craigslist finds bolted together to make it go. Just as with all other projects, I have a "Plan B" (hanging from the brake booster). Plans to clean it up and replace old parts with new as it needs repairs. Someday, it should be real nice, but for now, i just drive it like a rental!! Sam Attached Images

09-15-2011, 03:13 AM	#166
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Lets see some 1960 - 1966 engine bays __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

02-18-2012, 10:23 PM	#169
Sicboy Registered User Join Date: Jun 2009 Location: Eugene, OR Posts: 200	Re: Lets see some 1960 - 1966 engine bays __________________ Project Build (1): http://67-72chevytrucks.com/vboard/s...d.php?t=362482 Project build (2): http://67-72chevytrucks.com/vboard/s...d.php?t=370985 “Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming...Wow, What a Ride!” - Hunter S. Thompson

02-19-2012, 11:45 AM	#170
chemlab Registered User Join Date: Feb 2010 Location: Phoenix, AZ Posts: 114	Re: Lets see some 1960 - 1966 engine bays i love that pbr lid, i've seen it on a few threads since you've picked it up. if i could find a micky's one i would do the same

02-19-2012, 03:26 PM	#171
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: Lets see some 1960 - 1966 engine bays __________________

02-21-2012, 10:41 PM	#172
Chevysdominate Registered User Join Date: Jul 2006 Location: Springtucky, Oregon Posts: 265	Re: Lets see some 1960 - 1966 engine bays A little dirty but its been driven a lot lately. Attached Images

02-22-2012, 03:21 AM	#174
"El Jalapeno 66" Registered User Join Date: Dec 2011 Location: calexico Posts: 26	Re: Lets see some 1960 - 1966 engine bays 350 Attached Images

02-25-2012, 10:42 PM	#175
65sbss Registered User Join Date: Feb 2012 Location: HARTWELL GA Posts: 43	Re: Lets see some 1960 - 1966 engine bays Here you go... Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.