Lets see some 1960 - 1966 engine bays - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wrecker55 · 02-25-2012, 10:50 PM

1/4" stroke 454

Wrecker55 · 02-25-2012, 10:52 PM

ran a little on the warm side this time

suzq044 · 02-26-2012, 01:40 AM

Quote:

Originally Posted by The Sub

Here is my 65 sub...

I would love to see how you're running your spark-plug wires.. cleanest engine bay EVAR

The Sub · 02-26-2012, 07:23 PM

Quote:

Originally Posted by suzq044

I would love to see how you're running your spark-plug wires.. cleanest engine bay EVAR

I tried to hide all the wires and hoses. I ran the plug wires down the back and under the heads.

lucifer · 02-26-2012, 07:39 PM

Original 283 with 1980's TIP conversion.

mr.a · 02-26-2012, 10:03 PM

My new to me today 66, 454

1Bad62Pro/Street · 06-23-2012, 01:12 AM

Bump, nudge, ping, buzz, etc.

Posted via Mobile Device
Posted via Mobile Device

ABX131 · 06-23-2012, 11:48 AM

1Bad62Pro/Street · 06-23-2012, 12:03 PM

Monster Engine - Big Block - YouTube

Posted via Mobile Device

Narxoleptic Customs · 06-23-2012, 07:28 PM

Just some true old school valve covers (not repops) painted air cleaner and dirty oily 283 that starts everytime!! It's been in this truck since 1974...

Posted via Mobile Device

DoubleL · 06-23-2012, 10:59 PM

Just figuring out the throttle linkage

oldusafmsgt · 06-24-2012, 12:33 PM

61 Apache 20, original 235/4 spd

100%Chevy · 06-24-2012, 04:22 PM

My little torque monster-351-C
I'm working on the front suspension now.

Uploaded with ImageShack.us
Mike.

1Bad62Pro/Street · 06-25-2012, 11:59 AM

Here is the link to Tricked-out Chevy six cylinder engines.
http://67-72chevytrucks.com/vboard/s...d.php?t=276823

Keep'em coming fellas. Doesn't matter if it is shiny or dusty.
Posted via Mobile Device

towersddg9 · 06-25-2012, 06:50 PM

My 65, still working on the fleet bed panels!!!!!

RockTonka · 06-25-2012, 09:36 PM

Looks great towersddg9, nice attention to detail

MARTYZ · 06-25-2012, 11:48 PM

Nothing too Fancy just a cleaned up old small block, rest is origonal

towersddg9 · 06-26-2012, 12:35 AM

Quote:

Originally Posted by RockTonka

Looks great towersddg9, nice attention to detail

Thanks Rock, here is a before, and after

1Bad62Pro/Street · 06-27-2012, 09:48 PM

One heck of an engine bay!
V12 baby........

All sizes \| 1965 GMC Twin Six V12 Custom Pickup...

Quote:

http://www.flickr.com/photos/kneebea...n/photostream/

Posted via Mobile Device

1Bad62Pro/Street · 06-27-2012, 10:01 PM

V6 Pics
http://67-72chevytrucks.com/vboard/s....php?p=5224829

The 702-cubic-inch V12 "Twin Six" was offered in United States GMC commercial trucks, and as a special order option in Canada.
It was often mistaken as two V6 engines welded together but in fact was a single casting.
It used four separate exhaust manifolds, two separate carburetors, two separate distributor caps driven off of a single distributor drive, and other parts from the 351.
56 major parts are interchangeable between the Twin-Six and the other GMC V-6 engines to provide greater parts availability and standardization.
It produced 250 net SAE horsepower .
Torque was 585*lb·ft
Posted via Mobile Device
Posted via Mobile Device

pb6603 · 06-28-2012, 11:57 AM

I just dropped this one in my 66 last week.

Johnny Too Bad · 06-29-2012, 12:30 AM

Currently a little too much black, but I'm hoping to start dropping a little chrome on it. Not too much, but maybe some new valve covers and a few other odds and ends.

MikeS. · 06-29-2012, 01:24 AM

Here ya go, my 63 4x4 burb.

I don't think it's been touched since 1963.

RockTonka · 08-19-2012, 03:14 PM

Bringing this back to the top as we are trying to get ours worthy...

doobiebro · 08-19-2012, 03:47 PM

283 with sum modern upgrades...

02-25-2012, 10:50 PM	#176
Wrecker55 Registered User Join Date: Jun 2009 Location: Norman, Ok Posts: 108	Re: Lets see some 1960 - 1966 engine bays 1/4" stroke 454 Attached Images __________________ BUILDhttp://67-72chevytrucks.com/vboard/s...d.php?t=351049 INTRO http://67-72chevytrucks.com/vboard/s...d.php?t=349761

02-25-2012, 10:52 PM	#177
Wrecker55 Registered User Join Date: Jun 2009 Location: Norman, Ok Posts: 108	Re: Lets see some 1960 - 1966 engine bays ran a little on the warm side this time Attached Images __________________ BUILDhttp://67-72chevytrucks.com/vboard/s...d.php?t=351049 INTRO http://67-72chevytrucks.com/vboard/s...d.php?t=349761

02-26-2012, 07:39 PM	#180
lucifer Registered User Join Date: Mar 2010 Location: simcoe ontario canada Posts: 681	Re: Lets see some 1960 - 1966 engine bays Original 283 with 1980's TIP conversion. Attached Images __________________ 65 burb On the road Mar 26th Finally

02-26-2012, 10:03 PM	#181
mr.a Registered User Join Date: Feb 2012 Location: sterling NY Posts: 20	Re: Lets see some 1960 - 1966 engine bays My new to me today 66, 454 Attached Images

06-23-2012, 01:12 AM	#182
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays Bump, nudge, ping, buzz, etc. Posted via Mobile Device Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

06-23-2012, 11:48 AM	#183
ABX131 Registered User Join Date: Mar 2012 Location: Seattle,WA Posts: 317	Re: Lets see some 1960 - 1966 engine bays

06-23-2012, 07:28 PM	#185
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: Lets see some 1960 - 1966 engine bays Just some true old school valve covers (not repops) painted air cleaner and dirty oily 283 that starts everytime!! It's been in this truck since 1974... Posted via Mobile Device

06-23-2012, 10:59 PM	#186
DoubleL Registered User Join Date: Jun 2012 Location: Rathdrum, Idaho Posts: 305	Almost got it put back together.... Just figuring out the throttle linkage Attached Images

06-24-2012, 12:33 PM	#187
oldusafmsgt Registered User Join Date: May 2011 Location: Jasper, AL Posts: 224	Re: Lets see some 1960 - 1966 engine bays 61 Apache 20, original 235/4 spd Attached Images __________________ 1960 Chevy Apache10 Short Fleetside 1961 Chevy Apache10 Short Fleetside 1961 Chevy Apache20 Fleetside 1963 Chevy C10 Short Fleetside 1965 Chevy C10 Short Stepside 1965 Chevy C10 Long Fleetside 1966 GMC 1000 Long Fleetside 1966 Chevy C10 Short Fleetside

06-24-2012, 04:22 PM	#188
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Lets see some 1960 - 1966 engine bays My little torque monster-351-C I'm working on the front suspension now. Uploaded with ImageShack.us Mike.

06-25-2012, 11:59 AM	#189
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays Here is the link to Tricked-out Chevy six cylinder engines. http://67-72chevytrucks.com/vboard/s...d.php?t=276823 Keep'em coming fellas. Doesn't matter if it is shiny or dusty. Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

06-25-2012, 06:50 PM	#190
towersddg9 Registered User Join Date: Dec 2010 Location: Texas Posts: 246	Re: Lets see some 1960 - 1966 engine bays My 65, still working on the fleet bed panels!!!!! Attached Images

06-25-2012, 09:36 PM	#191
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: Lets see some 1960 - 1966 engine bays Looks great towersddg9, nice attention to detail __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

06-25-2012, 11:48 PM	#192
MARTYZ Registered User Join Date: Mar 2012 Location: Shallow Lake Ontario,Canada Posts: 201	Re: Lets see some 1960 - 1966 engine bays Nothing too Fancy just a cleaned up old small block, rest is origonal Attached Images

06-27-2012, 10:01 PM	#195
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays V6 Pics http://67-72chevytrucks.com/vboard/s....php?p=5224829 The 702-cubic-inch V12 "Twin Six" was offered in United States GMC commercial trucks, and as a special order option in Canada. It was often mistaken as two V6 engines welded together but in fact was a single casting. It used four separate exhaust manifolds, two separate carburetors, two separate distributor caps driven off of a single distributor drive, and other parts from the 351. 56 major parts are interchangeable between the Twin-Six and the other GMC V-6 engines to provide greater parts availability and standardization. It produced 250 net SAE horsepower . Torque was 585lb·ft Posted via Mobile Device* Posted via Mobile Device __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.



Register or Log In To remove these advertisements.

06-28-2012, 11:57 AM	#196
pb6603 Registered User Join Date: Jun 2012 Location: Pine Bluff, AR Posts: 3	Re: Lets see some 1960 - 1966 engine bays I just dropped this one in my 66 last week. Attached Images

06-29-2012, 12:30 AM	#197
Johnny Too Bad Registered User Join Date: Apr 2011 Location: Denver, CO Posts: 98	Re: Lets see some 1960 - 1966 engine bays Currently a little too much black, but I'm hoping to start dropping a little chrome on it. Not too much, but maybe some new valve covers and a few other odds and ends. Attached Images __________________ 1964 Chevrolet C10 SWB Stepside (350cid/TH400) 1978 Chevrolet C10 SWB Silverado Big 10 (454cid/TH400) -"Ah, the pressure's fierce!"

06-29-2012, 01:24 AM	#198
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: Lets see some 1960 - 1966 engine bays Here ya go, my 63 4x4 burb. I don't think it's been touched since 1963. __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447 Last edited by MikeS.; 06-29-2012 at 01:45 AM.

08-19-2012, 03:14 PM	#199
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: Lets see some 1960 - 1966 engine bays Bringing this back to the top as we are trying to get ours worthy... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

08-19-2012, 03:47 PM	#200
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 688	Re: Lets see some 1960 - 1966 engine bays 283 with sum modern upgrades... Attached Images __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

Register or Log In To remove these advertisements.