99 Silverado brakes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dfosh · 11-03-2008, 05:10 PM

I am going to change the brake pads . Is their anything i need to do diffrent because of the anti loc brakes . if so please explain . thanks

mothertrucker424 · 11-03-2008, 09:53 PM

open bleeder screws to colapse calipers so fluid doesn,t get push back through abs pump

rubrhammer · 11-06-2008, 12:07 AM

not necessary. Just retract the pistons with a clamp or big channel locks. I do it every day at the shop with no problems.
Here is a link to a thred I did on PM for GM truck brakes. Youcan use this info (with pics) to do your brake job. Hope it helps you. There are some tips in there to keep you brakes working freely. It shows the rear brakes but the tronts are similar enough that the info applies there also.
Bob
http://www.outbackers.com/forums/ind...opic=23002&hl=

dfosh · 11-08-2008, 02:59 PM

Thanks for the info . We did the brakes on my sons 2000 Silverado four times.. Had to change rotors twice 160000 miles .Since the first time he has said the brakes were not as good as the factory. I didnt know if we messed up the abs system or not . We just pushed the pistons back to get the new pads in. We did clean all the parts while they were off . I didnt know if you had to do somthing to the abs system . My 99 has 51000 on it and will need brakes soon .

**truckdude239** · 11-08-2008, 06:51 PM

i just use a clamp never had no problems yet

11-03-2008, 05:10 PM	#1
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	99 Silverado brakes I am going to change the brake pads . Is their anything i need to do diffrent because of the anti loc brakes . if so please explain . thanks

11-03-2008, 09:53 PM	#2
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	Re: 99 Silverado brakes open bleeder screws to colapse calipers so fluid doesn,t get push back through abs pump __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's

11-06-2008, 12:07 AM	#3
rubrhammer Registered User Join Date: Mar 2006 Location: Lyndonville ny Posts: 24	Re: 99 Silverado brakes not necessary. Just retract the pistons with a clamp or big channel locks. I do it every day at the shop with no problems. Here is a link to a thred I did on PM for GM truck brakes. Youcan use this info (with pics) to do your brake job. Hope it helps you. There are some tips in there to keep you brakes working freely. It shows the rear brakes but the tronts are similar enough that the info applies there also. Bob http://www.outbackers.com/forums/ind...opic=23002&hl=

11-08-2008, 02:59 PM	#4
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	Re: 99 Silverado brakes Thanks for the info . We did the brakes on my sons 2000 Silverado four times.. Had to change rotors twice 160000 miles .Since the first time he has said the brakes were not as good as the factory. I didnt know if we messed up the abs system or not . We just pushed the pistons back to get the new pads in. We did clean all the parts while they were off . I didnt know if you had to do somthing to the abs system . My 99 has 51000 on it and will need brakes soon .

11-08-2008, 06:51 PM	#5
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: 99 Silverado brakes i just use a clamp never had no problems yet __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.