Anyone used a pneumatic door skin tool?

[Jennandrand]

Has anyone had luck using a pneumatic door skin tool to fold the flange instead of hammer and dolly?

[ClassicStyle]

I've only seen one guy that can use one, otherwise it seems to be. the fastest way to ruin a panel. Haha

[hemi43]

Use a body hammer and a long piece of wood. One slip of that pneumatic tool and you'll damage the skin.

[Livrat]

I bought one thinking it may speed up the process, but so far I have not been able to master it even after many tries on sample pieces, (its real quick to destroy the part) I figure by the time I master it I could have several door skins installed by the hammer and dolly method so I tossed it in a drawer

[Jennandrand]

well I decided to try out the single pass pneumatic door skinner tool sold by Eastwood on the ds door of my 71 blazer. My first ever experience reskinning a door...Could be absolute beginners luck, but this thing works like an absolute D R E A M!! Watched the instructional video 4-5 times to be sure. Test fitted the skin, applied panel adhesive, tapped the edges down to about 45 degrees, and voila! Super clean factory looking seams. Definitely recommend.