The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-22-2010, 01:37 AM   #1
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
51' 3100 build in PA New to Site

Hi, been visiting this site for a while. New to building any vehicle. Learning alot about 47-54 specific chevy trucks. Love em, and also 60's c-10's. I am from Pittsburgh, will be working on this in Erie PA where I have access to all the essentials for customizing. Also going to do a 53' and will bag that. But the 51' is my baby in the making. I am a picture freak too. Keeping this looking vintage on the outside but under the hood, fenders, frame, inside etc will be crisp. Going to put this on an s-10 frame, lower it and use a 350 with manual trans.
Hope to meet some cool people on here, seems like I will.
Attached Images
     
99 to Life is offline   Reply With Quote
Old 01-22-2010, 03:14 AM   #2
drivea55
Registered User
 
drivea55's Avatar
 
Join Date: Oct 2009
Location: Monson,MA
Posts: 503
Re: 51' 3100 build in PA New to Site

looks like a nice place to work on the truck, and also looks like a great project. keep the pics coming.
i dig the winter pics, it makes you want to hold up in that garage, fire up the wood stove and get grinding!....lol

welcome!
__________________
current project;
1950 GMC "Junk Yard Dawg"
http://67-72chevytrucks.com/vboard/s...d.php?t=635960

___________________________________________

SOLD to "ONEBADFIVEFIVE"
http://67-72chevytrucks.com/vboard/s...d.php?t=436406
drivea55 is offline   Reply With Quote
Old 01-22-2010, 08:39 AM   #3
c10addict
Registered User
 
c10addict's Avatar
 
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
Re: 51' 3100 build in PA New to Site

Subscribed!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08
67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast.
64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten..
54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread...
07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind..
http://67-72chevytrucks.com/vboard/s...d.php?t=339340

See pics of my trucks in my profile
c10addict is offline   Reply With Quote
Old 01-22-2010, 10:05 AM   #4
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

Thanks guys. Yes the winter is a must. I feel it not only resembles how much harder it is to deal with finding and getting an oldie but also what we have to deal with on the east coast. It is so hard to find good oldies that lived thier lives here because of this very weather. It is kind of ironic I think, it is the heart of winter and this ol' beast is hybernating just waiting to be build and steet seeking again. This truck was built in Kansas City in August 51 my goal is to have it on the road before then but having a christening for it in August 2010. I got original license plates for the years of all the trucks I want, so those will accompany themselves on the front and also some original never used PA inspection stickers that I am displaying inside the cab for the year of each truck.

I have some cool ideas on some custom stuff I am gonna do. But never the less, I want this to look it's age. I am not a big fan of new paint jobs. Also the original guages are a must. OG steering wheel. My pockets are short, but I will make the best of it. I been fortunate to find really good deals on on this stuff. I will post all the other parts from when I first started with this. Such as a slew of 48' parts that I got on black friday this year, that is where this all started. Going from the ground up. That will be the 53'. This was pretty much complete and in good shape, so I had to jump on it. Also I want all the metal to be original, no aftermarket stuff, I think that is just too easy (and expensive). I love to hunt for stuff, find it and go get it, it makes it that much more satisfying.

Anyway speaking of that. This day was so crazy. This is my friends place where the build will take place. This driveway is loooonnnnggg and curvy, I started the day, getting stuck at the bottom of it, (s-10 2wd) so we had to push the dolly up the hill and all around the curves (I had zero traction on my shoes). This is my friend Fye in the picture. But after that everything went good. Then we got back and had to snowblow and shovel (pitch black) about 2-3ft deep of snow and wide enough to get this truck through at about 40 yards in length. It was a PIA getting it in the barn, but here she sits.

stay tuned, sorry for the long typing. I will post pics at night and have a story in the mornings.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com

Last edited by 99 to Life; 12-07-2010 at 09:59 AM.
99 to Life is offline   Reply With Quote
Old 01-22-2010, 11:26 AM   #5
tiny2085
Registered User
 
tiny2085's Avatar
 
Join Date: May 2004
Location: Tooele, UT
Posts: 12
Re: 51' 3100 build in PA New to Site

That truck looks solid ! nice find
__________________
1972 C20 Custom Camper Cheyenne Super - new shop truck
tiny2085 is offline   Reply With Quote
Old 01-22-2010, 11:46 AM   #6
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

Thanks, yeah the truck is solid which was a huge selling point for me. I am so anxious to get this going and to be street seeking. I am also going to do one from scratch but I will do this first since it is in better shape. I really am digging the 51' since it has vent windows and pull down door handles, it's the only model that has that. I got this for 1200 bucks. Up in NY came with extra rear fenders too, but no guages, kinda bumbed on that but still overall so happy with it.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 01-22-2010, 12:49 PM   #7
63 & 64 Bowties
and a few others
 
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
Re: 51' 3100 build in PA New to Site

Welcome to the board. We'll be watching your progress. Plenty of S-10 swaps either done or going on here.

tiny2085, where have you been? Two posts in almost 6 years? Military?
__________________
Bill US Army Vet -193rd Infantry
BlueRidgeMuscleCars.com

“The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi
63 & 64 Bowties is offline   Reply With Quote
Old 01-22-2010, 03:39 PM   #8
Kabwe
Certified Car Nut
 
Kabwe's Avatar
 
Join Date: Jan 2005
Location: Inglewood, California
Posts: 3,118
Re: 51' 3100 build in PA New to Site

Welcome to the site, great people, great information, and knowledge what else can you ask for.
Kabwe is offline   Reply With Quote
Old 01-22-2010, 10:12 PM   #9
xJoey Dubsx
Registered User
 
xJoey Dubsx's Avatar
 
Join Date: Jan 2010
Location: Brook Park, Oh
Posts: 206
Re: 51' 3100 build in PA New to Site

Welcome, can't wait to see progress!
__________________
[CENTER][FONT="Arial Black"]-------------------- Joey Dubs --------------------
2000 Dakota - Bagged, Shaved, and more
2003 Ram - Fast, and perdy
1951 GMC Stepside - All apart, like a puzzle.
xJoey Dubsx is offline   Reply With Quote
Old 01-22-2010, 10:34 PM   #10
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

So here is the frame I should be getting soon, weather has been an issue. Not
sure of the year but this is a single cab long bed frame. Getting a real good deal on it, minus that telephone pole.

Here is an engine and cradle I picked up. This is 350 fully carb and yes the
valve covers are on it. Just been hunting for the essentials and have had some
luck with a brand new dist HEI, a used carb, maybe some donor manifolds just to get it running (not sure about the steering and manifolds quite yet) got water pump, should be getting starter next week. Building an engine stand and degreasing it this weekend, going to paint it up nice and crome it up with the rest. So next weekend I am hoping to get it running.

Maybe I'll post pics from my initial part searching. Thanks everyone and if you know off hand if I will have steering issues, let me know.
Attached Images
  
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 01-24-2010, 09:49 PM   #11
tiny2085
Registered User
 
tiny2085's Avatar
 
Join Date: May 2004
Location: Tooele, UT
Posts: 12
Re: 51' 3100 build in PA New to Site

Quote:
Originally Posted by 63 & 64 Bowties View Post
Welcome to the board. We'll be watching your progress. Plenty of S-10 swaps either done or going on here.

tiny2085, where have you been? Two posts in almost 6 years? Military?
I joined back in the day because I loved to look at trucks, and finally about 6 yrs later finally got one, and totally forgot I was a member !
__________________
1972 C20 Custom Camper Cheyenne Super - new shop truck
tiny2085 is offline   Reply With Quote
Old 01-25-2010, 09:41 AM   #12
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

tiny, cool welcome back. Is that your 54'? I really am falling in love with those grille's. I just found a really good deal around here on the whole front end to one of those. But my money is so tight, I don't think I can jump on it. But anyway, I am glad you got a truck and that one. You don't see too many of those it seems.

I worked on my engine over the weekend, will post pics tonight. hopefully.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 01-26-2010, 12:57 AM   #13
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

Well here is an almost complete engine stand so we can try and fire up the engine next weekend maybe. I still need to get some things for it obviously. Have quite a bit lined up but still need a fly wheel and possibly alternator. Painted the engine up too.

Well it has been freezing cold so working on the truck is kind of not happening right now. But soon I should be picking up the frame, looking to mount the V-8 mounts and start working on the cab and also lowering the frame.

Does anyone have any suggestions on drop spindles and blocks for s-10's, never ran them. Are there ones to avoid? I wanna go pretty low without
baggin it, but want a decent ride.

thanks
Attached Images
 
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 01-26-2010, 02:59 PM   #14
britnjc
Registered User
 
britnjc's Avatar
 
Join Date: Mar 2009
Location: Helena, Alabama
Posts: 453
Re: 51' 3100 build in PA New to Site

sport truck direct has a kit that is nice quality. I installed it on my project but have not drivin it since the install so as far as ride quality I can not comment
britnjc is offline   Reply With Quote
Old 01-28-2010, 10:32 AM   #15
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

britnjc-thanks for the link. Now that my memory has been jogged, I do remember reading and hearing good things about beltech, which is what I am going to go with.

I figure I'll try the 2'' spindles and 3'' blocks in the back. Get the engine on
and see where she sits, then decide if it can go lower by cuttin the coils or
removing some leafs. Again I wanna keep it low but a good ride. I am a month or two away from that maybe.

Just got some dress up stuff from Summitt, also got a high performance distributor for rock bottom price, then got a used dist, starter and wire harness (not that I will necessarily use this one) for $40. I really just need a
fly wheel and I should have just about everything to get my 350 running. Which is set to take place this weekend, most likely. I'll post some pics.

Here is a pic of a good stance. I honestly like a little more tuck in the rear than this one, but anyway the height is great I think. Also I will be keeping mine looking vintage as well.
Attached Images
 
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 01-28-2010, 11:17 AM   #16
bjcaldwe
Registered User
 
bjcaldwe's Avatar
 
Join Date: Aug 2009
Location: OKC, OK
Posts: 1,169
Re: 51' 3100 build in PA New to Site

That looks pretty good.

I have belltech spring and flip kit for a 3/5 on my crewcab and have no complaints with the parts. My notch is a mcg, but the belltech looked sturdier.
__________________
My AD Truck Build Thread
52 GMC one day laying on the running boards
2004 Chevy Crewcab. 3/5 and notched
bjcaldwe is offline   Reply With Quote
Old 02-22-2010, 11:55 PM   #17
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

Feb 22nd. Ok been a little while since I posted. Just been waiting until I get engine as dressed up as I like. Well this pic is before some dress up stuff I got for it. But is it up and running and sounds good. Got an eddlebrock intake and carb. Got some nice aluminum pulleys to put on still, new water pump and some other chrome goodies.

Here is a pic of some drop spindles I picked up. Guy told me they were belltech and upon emailing for two weeks and driving almost an hour to get them, they are from bell foundry out of LA, not belltechs. Oh well, they were $125 with blocks. If anyone has any critiques on these let me know.

Should be getting the frame tomorrow and will be cleaning it and hopefully lowering it this weekend.

Also came across a good deal on a 55' 1st series 5 window cab, doors, and whole front clip. needs some work, but I really wanted a 55 1st series because they were only in production for 6 months and I do like the grilles.
I'll put pics of them up too. So now instead of the 53' which is on the back burner for now. I have the 51' which I am trying to get done asap, then I got the 55' as another project. I also have another s-10 frame lined up for that.
I also have bed, doors fenders and more for a 48' gmc.

Got plenty of more pics to post. Hopefully after this weekend I can do so.
Attached Images
  
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 02-23-2010, 12:37 AM   #18
nickp51chevy
Registered Chevy Owner
 
nickp51chevy's Avatar
 
Join Date: Aug 2008
Location: Snohomish, wa
Posts: 1,557
Re: 51' 3100 build in PA New to Site

This looks like it's going to be a great build. I'm going keep an eye on this one.
__________________
Love is fleeting, but Chevy trucks are forever!!!!

1970 Chevy CST C10 long box 350/400
2008 Chevy Silverado short box 4x4

Had;
1951 Chevy short box 307/T5
1988 Chevy shot box 4x4 350/350
1971 Chevy C10 long box 4x4 350/350
1971 Chevy C20 long box 350/350
1971 Chevy C10 long box 350/350
nickp51chevy is offline   Reply With Quote
Old 02-23-2010, 08:17 AM   #19
Dan Bowles
AD Addict
 
Join Date: Oct 2009
Location: Blissfield, MI
Posts: 822
Re: 51' 3100 build in PA New to Site

Cool. I'm digging the switch to the '54/55S1! I just got 2" Belltech for my son's '54. It already sits pretty low but lower isn't too bad. I'm not cutting coils or pulling leaves because I want the better ride.

Watch Craigslist, you never know what you'll find!
Dan Bowles is offline   Reply With Quote
Old 02-25-2010, 10:10 AM   #20
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

dan, well I am still doing the 51' first. the 55 1st series will be another project. It needs a lot of metal work done to the cab, corners, back bottom, kick panels and right below the hood latches on the fire wall. The rear floor boards etc. So that is going to be an emense amount of work, not to mention the fenders and all that. Here is a pic of what I got, I will upload more of the actual haul. I got corner glass,door glass and gauges.

Just got my s-10 frame last night. I will upload pics of that as well.
Attached Images
 
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com

Last edited by 63 & 64 Bowties; 02-25-2010 at 10:31 AM.
99 to Life is offline   Reply With Quote
Old 03-02-2010, 08:59 AM   #21
Bullit68
Registered User
 
Join Date: Mar 2010
Location: Pittsburgh, PA
Posts: 2
Re: 51' 3100 build in PA New to Site

Hey 99 to Life, I'm in the Pgh area, saw this thread and have a couple questions. Sent you a PM. Looks like you have a good project started there! -Don
Bullit68 is offline   Reply With Quote
Old 03-02-2010, 11:24 AM   #22
1sik52
Account Suspended
 
Join Date: Oct 2008
Location: Gulfport, Ms
Posts: 833
Re: 51' 3100 build in PA New to Site

subscribed
1sik52 is offline   Reply With Quote
Old 03-03-2010, 12:22 AM   #23
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

Ok, I know I am mixing up two builds here. I am still working on the 51' truck first (the first pics in thread).

So after getting this 55.1 cab and clip, I also finally picked up my s-10 frame. I put the cab on the frame and took it up north to work on it. Well as the pics show, cab was on there and snow wasn't too bad. Let me say, don't haul a frame with bald tires, a cab on it and connected to a tow dolly. Pulling it with a 2wd s-10 in a snow storm. Well that is what I did, took 2 hours to go the distance of one. Got stuck in my grams driveway. Next day got stuck again, had to have a friend help tow me out. Finally got it into his garage and it was a snow storm again. This snow has been KILLING my project. I had to move the cab up higher on the frame the second day because the frame was swirling so bad I almost wrecked.

We torched the ice and snow off it. Some work has begun, will post them pics next week.
Attached Images
    
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 03-03-2010, 12:27 AM   #24
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 51' 3100 build in PA New to Site

MARCH 2ND.

Got another s-10 for a frame and also some other odds and ends off it.
Just picked this up today. got a tranny with it, I'll sell to get my money
back for this set up. Paid $150 for this.

Now I have two frames and a 55.1 and a 51' truck.

I need a 5 speed tranny for my 350 that will be in the 51'. An
aluminum radiator, exhaust and some odds and ends.

The 55.1needs a lot of metal work (front clip, cab) I need engine, tranny
etc for that. I want to bag that one.
Attached Images
 
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 03-04-2010, 06:40 AM   #25
Dan Bowles
AD Addict
 
Join Date: Oct 2009
Location: Blissfield, MI
Posts: 822
Re: 51' 3100 build in PA New to Site

You should haul that 55.1 to my house instead and haul back a NV3500 I've got in the barn...
Dan Bowles is offline   Reply With Quote
Reply

Bookmarks

Tags
1951, chevy 3100, chevy 350, s-10


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com