|
12-26-2016, 07:08 PM
|
#1 |
|
Registered User
Join Date: Jul 2015
Location: Whittier, CA
Posts: 851
|
Brake lamp issue
Was told my tail lights don't appear when stopping. Checked all my connections with a test lamp. Fuses are good, even replaced them just to do it. Brake switch is responsive. But when pressing the brake pedal, no power coming from the black power wire. When I turn on the light switch. I got rear lights and power running through the black wire. Brake lights just don't work at all. Can't figure out why?
I have a 63 c10. Please share some advice or expletive. This is my daily. Thanks ! |
|
|
|
12-26-2016, 07:25 PM
|
#2 |
|
Senior Member
 
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,820
|
Re: Brake lamp issue
__________________
MusicMan70 1961 GMC Suburban |
|
|
|
|
12-26-2016, 09:25 PM
|
#3 |
|
Senior Member
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: Brake lamp issue
Have you got turn signals? The brake and running lights wont be on the same wire. Put a ground wire on the bed to the frame and I also ground my tail light housings to the bed.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
12-26-2016, 09:43 PM
|
#4 |
|
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: Brake lamp issue
If you have rear turn signals L and R then the problem is most likely in the turn switch BUT can be from brake switch to turn switch or bad grounds
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
