NJ parting out 82 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 12-29-2017, 05:44 PM

this truck body wise is pretty bad
motor runs its a 350 $350
trans is shot and spoken for
transfer case $150
hood sold
plow motor , electrical, and lights sold
plow frame $100
axels $100 each
frame is in good shape $150
dash is cut pad is shot let me know needs NO SHIPPING ON BIG STUFF UNLESS YOU ARRANGE IT

86454k30 · 12-29-2017, 06:54 PM

What kind of shape is the grille surround trim?

**old Rusty C10** · 12-29-2017, 08:52 PM

tomorrow ill get up close to it and get some pics for you

OutlawM92 · 12-30-2017, 04:29 AM

Pictures of seatbelts and grille bowtie emblem when you can.. interested in those.. thanks

**TKCR** · 12-30-2017, 09:51 AM

Quote:

Originally Posted by OutlawM92

Pictures of seatbelts and grille bowtie emblem when you can.. interested in those.. thanks

PM sent

**TKCR** · 12-30-2017, 09:53 AM

I sure would like to get the seat, if it's available. Might be too far of a drive though.

**old Rusty C10** · 12-30-2017, 10:51 AM

the grille surround has some dents in it, if interested make offer seat is shot on drivers side, you'd have to pick up but id give it to you if you want it grille was broken for plow wiring. I have my old 82 grille in my garage. Ill shoot a pic of that the emblem is a slightly oversize I think I glued on as the gold was shot pic to follow

**old Rusty C10** · 12-30-2017, 11:00 AM

Its been up in the rafters for a couple of years but let me know if you can use it

**TKCR** · 12-30-2017, 11:43 AM

That seat is fine for restoring, which i what I started as a hobby. Let me map out the driving and see if I can find more seats along the way, to make the trip more worth while. Unless you have a source for more seats?

**old Rusty C10** · 12-30-2017, 06:54 PM

if youre looking for restorables I have two for you one is a blue one

72 blue · 12-31-2017, 10:54 PM

I need a drivers side vent window assembly I'm in 35125 and can send PayPal for payment and shipping
Posted via Mobile Device

Speeding Dakota · 01-02-2018, 07:59 PM

Second in line for the grill if "86454K30" is not interested.
Also what are you asking for it?
Thanks

86454k30 · 01-02-2018, 08:03 PM

Passing on the grille trim. Don't need the grille so speedingdakota is welcome to it.

**old Rusty C10** · 01-03-2018, 09:20 AM

weve got some bad weather here give me a few days

**dtkarst** · 01-07-2018, 03:58 AM

Do you have a driver side exhaust manifold? And a picture?

**old Rusty C10** · 01-09-2018, 05:58 PM

Quote:

Originally Posted by dtkarst

Do you have a driver side exhaust manifold? And a picture?

I just pulled the truck up on the driveway today ( from in the field) I hope to have motor out tomorrow but this is what I have so far is 20 plus ride ok?

**old Rusty C10** · 01-11-2018, 05:01 PM

couldn't get seatbelts out broke socket trying and the vent window was not in good shapes o I left it

Speeding Dakota · 01-12-2018, 06:07 PM

Still waiting for a quote on the grill shipped to 17361?
Thanks

12-29-2017, 05:44 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	parting out 82 4x4 this truck body wise is pretty bad motor runs its a 350 $350 trans is shot and spoken for transfer case $150 hood sold plow motor , electrical, and lights sold plow frame $100 axels $100 each frame is in good shape $150 dash is cut pad is shot let me know needs NO SHIPPING ON BIG STUFF UNLESS YOU ARRANGE IT Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-29-2017, 06:54 PM	#2
86454k30 Registered User Join Date: May 2008 Location: Spokane, Washington Posts: 596	Re: parting out 82 4x4 What kind of shape is the grille surround trim?

12-29-2017, 08:52 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 tomorrow ill get up close to it and get some pics for you __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-30-2017, 04:29 AM	#4
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: parting out 82 4x4 Pictures of seatbelts and grille bowtie emblem when you can.. interested in those.. thanks __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

12-30-2017, 09:53 AM	#6
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,857	Re: parting out 82 4x4 I sure would like to get the seat, if it's available. Might be too far of a drive though. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

12-30-2017, 10:51 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 the grille surround has some dents in it, if interested make offer seat is shot on drivers side, you'd have to pick up but id give it to you if you want it grille was broken for plow wiring. I have my old 82 grille in my garage. Ill shoot a pic of that the emblem is a slightly oversize I think I glued on as the gold was shot pic to follow Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-30-2017, 11:00 AM	#8
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 Its been up in the rafters for a couple of years but let me know if you can use it Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-30-2017, 11:43 AM	#9
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,857	Re: parting out 82 4x4 That seat is fine for restoring, which i what I started as a hobby. Let me map out the driving and see if I can find more seats along the way, to make the trip more worth while. Unless you have a source for more seats? __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

12-30-2017, 06:54 PM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 if youre looking for restorables I have two for you one is a blue one __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-31-2017, 10:54 PM	#11
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: parting out 82 4x4 I need a drivers side vent window assembly I'm in 35125 and can send PayPal for payment and shipping Posted via Mobile Device

01-02-2018, 07:59 PM	#12
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	Re: parting out 82 4x4 Second in line for the grill if "86454K30" is not interested. Also what are you asking for it? Thanks

01-02-2018, 08:03 PM	#13
86454k30 Registered User Join Date: May 2008 Location: Spokane, Washington Posts: 596	Re: parting out 82 4x4 Passing on the grille trim. Don't need the grille so speedingdakota is welcome to it.

01-03-2018, 09:20 AM	#14
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 weve got some bad weather here give me a few days __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-07-2018, 03:58 AM	#15
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: parting out 82 4x4 Do you have a driver side exhaust manifold? And a picture?

01-11-2018, 05:01 PM	#17
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: parting out 82 4x4 couldn't get seatbelts out broke socket trying and the vent window was not in good shapes o I left it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

01-12-2018, 06:07 PM	#18
Speeding Dakota Registered User Join Date: Oct 2013 Location: Shrewsbury, PA Posts: 325	Re: parting out 82 4x4 Still waiting for a quote on the grill shipped to 17361? Thanks

Register or Log In To remove these advertisements.