Inner windshield header piece - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Orange71shorty** · 08-11-2021, 10:30 PM

Does anyone have experience with reproduction inner header piece for the front windshield frame? Mine is rusted but the upper header is all solid

**1rippen6** · 08-11-2021, 11:00 PM

There is a good write up on the board on the repoped headers, I'll see if I can find it.

**1rippen6** · 08-11-2021, 11:03 PM

Keep in mind, this was 6 years ago so I would assume they have fixed some of the issues

http://67-72chevytrucks.com/vboard/s...ght=windshield

**Orange71shorty** · 08-11-2021, 11:11 PM

Quote:

Originally Posted by 1rippen6

Keep in mind, this was 6 years ago so I would assume they have fixed some of the issues

http://67-72chevytrucks.com/vboard/s...ght=windshield

Thanks much 1rippen6

1moretruck · 08-13-2021, 03:14 AM

I did the complete windshield header 5pc. kit recently and it fit very good, the only problem i had was the screw holes for the visor retainers were too big. i didnt even have to do any trimming to the 3 outer pieces. just a little on the 2 inner braces.

**Orange71shorty** · 08-13-2021, 08:45 AM

Quote:

Originally Posted by 1moretruck

I did the complete windshield header 5pc. kit recently and it fit very good, the only problem i had was the screw holes for the visor retainers were too big. i didnt even have to do any trimming to the 3 outer pieces. just a little on the 2 inner braces.

Do you know what brand the parts were and where did you source them?

Thealien · 08-13-2021, 10:23 AM

Quote:

Originally Posted by Orange71shorty

Do you know what brand the parts were and where did you source them?

I believe the windshield header pieces are only made by one manufacturer. I Purchased the pieces a little while ago and they are not installed yet. When I was looking to purchase everybody was out of stock. And then everybody seem to have them about the same time when they came back?

1moretruck · 08-13-2021, 03:09 PM

I got them from GMC Paul's

**SoCoC10** · 08-15-2021, 04:59 PM

I purchased one a year or two ago. Manufactured by Woodall. Very nice piece. Something to consider is that all you need is the inner piece. Just buy the inner piece for a truck, drill and weld in the captured visor nuts. Done.

**Orange71shorty** · 08-16-2021, 07:41 PM

Quote:

Originally Posted by SoCoC10

I purchased one a year or two ago. Manufactured by Woodall. Very nice piece. Something to consider is that all you need is the inner piece. Just buy the inner piece for a truck, drill and weld in the captured visor nuts. Done.

I wish it was that easy. Blazer header panel is significantly different than pickup

08-11-2021, 10:30 PM	#1
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 526	Inner windshield header piece Does anyone have experience with reproduction inner header piece for the front windshield frame? Mine is rusted but the upper header is all solid

08-11-2021, 11:00 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Inner windshield header piece There is a good write up on the board on the repoped headers, I'll see if I can find it.

08-11-2021, 11:03 PM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Inner windshield header piece Keep in mind, this was 6 years ago so I would assume they have fixed some of the issues http://67-72chevytrucks.com/vboard/s...ght=windshield

08-13-2021, 03:14 AM	#5
1moretruck Registered User Join Date: May 2021 Location: Center Barnstead NH Posts: 35	Re: Inner windshield header piece I did the complete windshield header 5pc. kit recently and it fit very good, the only problem i had was the screw holes for the visor retainers were too big. i didnt even have to do any trimming to the 3 outer pieces. just a little on the 2 inner braces. __________________ 1972 C10 SWB 383 M22 1972 K20 454 1970 K5 1985 M1008 1986 M1008 2020 2500HD Duramax

08-13-2021, 03:09 PM	#8
1moretruck Registered User Join Date: May 2021 Location: Center Barnstead NH Posts: 35	Re: Inner windshield header piece I got them from GMC Paul's __________________ 1972 C10 SWB 383 M22 1972 K20 454 1970 K5 1985 M1008 1986 M1008 2020 2500HD Duramax

08-15-2021, 04:59 PM	#9
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,142	Re: Inner windshield header piece I purchased one a year or two ago. Manufactured by Woodall. Very nice piece. Something to consider is that all you need is the inner piece. Just buy the inner piece for a truck, drill and weld in the captured visor nuts. Done. __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.