71' Blazer Rust bucket build

[VA72C10]

WOwsers....from 1 to 3 in a hurry Looking forward to seeing what you do with these...like the 2wd SLAM idea The 4wd frame gets you lower than a 2wd would...but if you do a BIG notch...that doesn't matter

I'd be interested in the plates as wall art I have a few nice 72 pairs...they actually want them clean/good white paint or they won't let us run them here (according to DMV)

Looks like some really nice parts from the last two blazers...

[richard2717]

Originally Posted by VA72C10

WOwsers....from 1 to 3 in a hurry Looking forward to seeing what you do with these...like the 2wd SLAM idea The 4wd frame gets you lower than a 2wd would...but if you do a BIG notch...that doesn't matter

I'd be interested in the plates as wall art I have a few nice 72 pairs...they actually want them clean/good white paint or they won't let us run them here (according to DMV)

Looks like some really nice parts from the last two blazers...

I would only lower it as low as I could go without notching. My comfort area is in body & paint. I can do suspension and all but only have limited experience in it. I plan to read up on the site before tackling anything like that. I also have found another board member that is doing the same thing that lives close enough to visit should I go that way.

As soon as I figure out what i am doing with the plates I will let you have 1st dibs on them. Other than wall art, they have no value to me unless someone has a set of 68' 71' or 72' MD plates that I could use on either the panel truck or one of the blazers. They are getting harder to come by, for sure.

Richard