4speed and NP 205 worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robby · 11-02-2003, 04:40 PM

I have an sm465 on a NP 205 transfer case with a front driveshaft I would like to sell. I cannot verify whether it worked well or not but the previous owner said it did. What is it worth? Any help would be great.

Pont · 11-03-2003, 08:31 PM

Robby,

Before I get started, my name is Rob also (and I spell mine the same way, with a "y" instead of "ie", seems like most are spelled "ie")

Anyway, I recently paid $200 for that same setup, complete from the bellhousing back. However, I think I got a good deal on it in my area. Typically, that setup goes for around $300-$350, in good working condition, where I live. It might be worth more than that in some areas, it's all about supply and demand. If you can confirm that the setup is good, I would guess that you could get top dollar for it. If it's sold "as is" and you don't know if it will even work, then expect to take less for it. If you think it needs work, I wouldn't take any less than $150. If you think it's good to go, I would start at $300 and go down from there.

Hope this helps..........

Rob

robby · 11-03-2003, 09:48 PM

Thanks Rob-nice name!

11-02-2003, 04:40 PM	#1
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	4speed and NP 205 worth? I have an sm465 on a NP 205 transfer case with a front driveshaft I would like to sell. I cannot verify whether it worked well or not but the previous owner said it did. What is it worth? Any help would be great. __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)

11-03-2003, 08:31 PM	#2
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Robby, Before I get started, my name is Rob also (and I spell mine the same way, with a "y" instead of "ie", seems like most are spelled "ie") Anyway, I recently paid $200 for that same setup, complete from the bellhousing back. However, I think I got a good deal on it in my area. Typically, that setup goes for around $300-$350, in good working condition, where I live. It might be worth more than that in some areas, it's all about supply and demand. If you can confirm that the setup is good, I would guess that you could get top dollar for it. If it's sold "as is" and you don't know if it will even work, then expect to take less for it. If you think it needs work, I wouldn't take any less than $150. If you think it's good to go, I would start at $300 and go down from there. Hope this helps.......... Rob __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

11-03-2003, 09:48 PM	#3
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	Thanks Rob-nice name! __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.