new style console in my blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevnkevin · 03-06-2016, 01:57 PM

hello all
just thought I'd share some pics of my new style console install in my blazer
as I've seen lots of others on here too
it was very easy and to me it looks like it could have been factory, kind of a blend of old and new
I had the console lid recovered in matching material and had the stitching done to mimic the original console lid and re-used the emblem too, then painted the console to match as close as possible
I added power ports for phone charging or GPS or what ever, cause you need them
in all i think it turned out pretty good and was a very simple and use able addition
enjoy the pictures

Malo83 · 03-06-2016, 02:20 PM

Nice!

ClassicStyle · 03-06-2016, 03:44 PM

Actually looks really good! What's it out of? Trailblazer?

**praisegeetarman** · 03-06-2016, 09:26 PM

I love what you did with the top. Going to do that with the pad on my Tuffy console.

71swb4x4 · 03-06-2016, 09:56 PM

Very nice! What is it out of?

sbrban · 03-06-2016, 10:24 PM

looks real clean!

extd56 · 03-07-2016, 12:06 AM

seems to fit great

chevnkevin · 03-08-2016, 03:42 AM

thanks for the comments guys
the console is from a 2000-2002 ford expedition or excursion
though i cant take all the credit , i saw this in a cool blazer when i was at the good guys show in pleasanton this summer , and managed to get the guy to tell me what it was from
after that i had to have one and here it is , cant wait for summer to go cruising again

**EricSean** · 03-08-2016, 08:19 AM

So with the the rear cup holders is it from the Eddie Bower? All the consoles I see don't have it.

ochre 72 · 03-08-2016, 09:44 AM

Nice work! That turned out great!

chevnkevin · 03-08-2016, 09:34 PM

Eric
not sure which one it came out of but there are two styles of consoles
a wide and a narrow
the narrow one is when the seats have arm rests and they don't have the cup holders
the wide is the one I have

**EricSean** · 03-08-2016, 10:41 PM

Cool thanks. If you get a chance could you measure the width of yours. I am looking for one and don't want to waste my money on the wrong one.

71swb4x4 · 03-08-2016, 10:54 PM

Did you add the power ports to the back too?

YBNORML · 03-09-2016, 01:25 AM

Looks good Kev!

**72gmguy** · 03-09-2016, 07:59 AM

I think the Lincoln navigator version had the cup holders.

chastain90 · 03-11-2016, 11:00 PM

Awesome

Chulisohombre · 03-12-2016, 06:19 AM

That looks awesome. Great job.

PGG · 03-15-2016, 07:50 AM

I would love to have a console like this but mine is 4x4 so not sure there is anything that can be done that would work with it. PG

**EricSean** · 03-17-2016, 05:32 PM

I wonder how it would look if the center of the console where the emblem is was done in houndstooth like the seats.

03-06-2016, 01:57 PM	#1
chevnkevin Registered User Join Date: Nov 2011 Location: sherwood park ,alberta Posts: 44	new style console in my blazer hello all just thought I'd share some pics of my new style console install in my blazer as I've seen lots of others on here too it was very easy and to me it looks like it could have been factory, kind of a blend of old and new I had the console lid recovered in matching material and had the stitching done to mimic the original console lid and re-used the emblem too, then painted the console to match as close as possible I added power ports for phone charging or GPS or what ever, cause you need them in all i think it turned out pretty good and was a very simple and use able addition enjoy the pictures Attached Images

03-06-2016, 02:20 PM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: new style console in my blazer Nice!

03-06-2016, 03:44 PM	#3
ClassicStyle Registered User Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 215	Re: new style console in my blazer Actually looks really good! What's it out of? Trailblazer? __________________ 1972 Dark blue, Cst, Highlander

03-06-2016, 09:26 PM	#4
praisegeetarman Senior Member Join Date: Feb 2010 Location: Harrah, Washington Posts: 323	Re: new style console in my blazer I love what you did with the top. Going to do that with the pad on my Tuffy console. __________________ 71 Blazer 4X4 (unmolested, all original (including paint) 74,000 mile barn find) 67 Camaro RS SS (unmolested, all original (including paint) 81,000 mile barn find) Keith Riel

03-06-2016, 09:56 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: new style console in my blazer Very nice! What is it out of? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

03-06-2016, 10:24 PM	#6
sbrban Registered User Join Date: Sep 2002 Location: Iowa Posts: 236	Re: new style console in my blazer looks real clean! __________________ you never have too many suburbans....

03-07-2016, 12:06 AM	#7
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: new style console in my blazer seems to fit great

03-08-2016, 03:42 AM	#8
chevnkevin Registered User Join Date: Nov 2011 Location: sherwood park ,alberta Posts: 44	Re: new style console in my blazer thanks for the comments guys the console is from a 2000-2002 ford expedition or excursion though i cant take all the credit , i saw this in a cool blazer when i was at the good guys show in pleasanton this summer , and managed to get the guy to tell me what it was from after that i had to have one and here it is , cant wait for summer to go cruising again

03-08-2016, 08:19 AM	#9
EricSean Active Member Join Date: May 2013 Location: Hanover,PA Posts: 162	Re: new style console in my blazer So with the the rear cup holders is it from the Eddie Bower? All the consoles I see don't have it.

03-08-2016, 09:44 AM	#10
ochre 72 Registered User Join Date: Feb 2016 Location: Woodstock, Ga. Posts: 183	Re: new style console in my blazer Nice work! That turned out great!

03-08-2016, 09:34 PM	#11
chevnkevin Registered User Join Date: Nov 2011 Location: sherwood park ,alberta Posts: 44	Re: new style console in my blazer Eric not sure which one it came out of but there are two styles of consoles a wide and a narrow the narrow one is when the seats have arm rests and they don't have the cup holders the wide is the one I have

03-08-2016, 10:41 PM	#12
EricSean Active Member Join Date: May 2013 Location: Hanover,PA Posts: 162	Re: new style console in my blazer Cool thanks. If you get a chance could you measure the width of yours. I am looking for one and don't want to waste my money on the wrong one.

03-08-2016, 10:54 PM	#13
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: new style console in my blazer Did you add the power ports to the back too? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

03-09-2016, 01:25 AM	#14
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: new style console in my blazer Looks good Kev! __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

03-09-2016, 07:59 AM	#15
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 819	Re: new style console in my blazer I think the Lincoln navigator version had the cup holders. __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii



Register or Log In To remove these advertisements.

03-11-2016, 11:00 PM	#16
chastain90 Registered User Join Date: Jul 2009 Location: Chatsworth Ga Posts: 400	Re: new style console in my blazer Awesome

03-12-2016, 06:19 AM	#17
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: new style console in my blazer That looks awesome. Great job. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

03-15-2016, 07:50 AM	#18
PGG Registered User Join Date: Mar 2015 Location: Fort Worth Texas Posts: 279	Re: new style console in my blazer I would love to have a console like this but mine is 4x4 so not sure there is anything that can be done that would work with it. PG

03-17-2016, 05:32 PM	#19
EricSean Active Member Join Date: May 2013 Location: Hanover,PA Posts: 162	Re: new style console in my blazer I wonder how it would look if the center of the console where the emblem is was done in houndstooth like the seats.

Register or Log In To remove these advertisements.