1970 c20 disc brake swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sim · 03-28-2019, 09:11 AM

hello,

been trying to figure out if this can work.

1977 disc brake spindle from a g30, I replaced the "big disc" with a normal one
had to change upper and lower ball joint
longer hydraulic hose

everything works to this point. spindle is mounted and moves freely.

the point where I am a little bit curious is the steering. my 70 c20 got 5/8" tie rods (if i´m right?)
the van spindle asks for a 11/16" tie rod.

Is there any other solution than buying this super expensive hotchkis tie rod adapter sleeves where you can connect a 11/16 tie rod to a 5/8.

remember that I´m from Europe. So shipping heavy and big parts like a spindle is very expensive.

SCOTI · 04-01-2019, 03:43 PM

Would these work for you?

https://www.performanceonline.com/19...ONVERSIONS-Pr/

SimonTek · 04-01-2019, 06:03 PM

Really what are the odds that we would both be in the process of doing the same thing on a c20. I pulled up the forum, because I couldn't remember how the steering went.

77c10bowtie · 04-04-2019, 08:19 AM

have a machine shop open the taper in the drag link to run tie rods off the 77

sim · 04-06-2019, 04:22 AM

@simon tek
Haha, even the same name!

Thank you all. I've ordered the hotchkis tie rod adapters.
I'll let you know if it works.

03-28-2019, 09:11 AM	#1
sim Registered User Join Date: Mar 2019 Location: Austia/Europe Posts: 2	1970 c20 disc brake swap hello, been trying to figure out if this can work. 1977 disc brake spindle from a g30, I replaced the "big disc" with a normal one had to change upper and lower ball joint longer hydraulic hose everything works to this point. spindle is mounted and moves freely. the point where I am a little bit curious is the steering. my 70 c20 got 5/8" tie rods (if i´m right?) the van spindle asks for a 11/16" tie rod. Is there any other solution than buying this super expensive hotchkis tie rod adapter sleeves where you can connect a 11/16 tie rod to a 5/8. remember that I´m from Europe. So shipping heavy and big parts like a spindle is very expensive. Attached Images Last edited by sim; 03-28-2019 at 09:30 AM.

04-01-2019, 03:43 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,910	Re: 1970 c20 disc brake swap Would these work for you? https://www.performanceonline.com/19...ONVERSIONS-Pr/ __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-01-2019, 06:03 PM	#3
SimonTek Registered User Join Date: Jun 2015 Location: Springville, IN Posts: 7	Re: 1970 c20 disc brake swap Really what are the odds that we would both be in the process of doing the same thing on a c20. I pulled up the forum, because I couldn't remember how the steering went. __________________ 1969 Chevrolet C20 Longbed I-6 250, SM465

04-04-2019, 08:19 AM	#4
77c10bowtie Registered User Join Date: Dec 2018 Location: Goodyear, AZ Posts: 59	Re: 1970 c20 disc brake swap have a machine shop open the taper in the drag link to run tie rods off the 77 __________________ 77 SWB 2wd. gutted, caged, slicks, not weighed yet 02 Duramax CCSB 4x4 12.7@104 6750lbs

04-06-2019, 04:22 AM	#5
sim Registered User Join Date: Mar 2019 Location: Austia/Europe Posts: 2	Re: 1970 c20 disc brake swap @simon tek Haha, even the same name! Thank you all. I've ordered the hotchkis tie rod adapters. I'll let you know if it works.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.