SD parting out 2 trucks - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**vetnat** · 10-03-2017, 12:11 AM

2 sets of mirrors, and one single. First set is in OK condition, a chunk of glass is missing out of one of them. I was thinking of using them myself, so the price is a little dear at $50 picked up.

2nd set is in poor shape, and probably not what you are looking for. Would take $20 for them.

The singleton is in pretty good shape. $25.

**vetnat** · 10-03-2017, 12:14 AM

Singleton.

**vetnat** · 10-03-2017, 12:20 AM

More.

**inkfamous_13** · 11-25-2017, 11:33 AM

looking for any condition arm rest for m truck im partial to the orig design55-65

Greg B · 11-25-2017, 09:34 PM

i'm looking for GMC turn signal/parking lights (64,65,66) that mount in the hood (cat eye style)

**vetnat** · 11-25-2017, 10:36 PM

Quote:

Originally Posted by inkfamous_13

looking for any condition arm rest for m truck im partial to the orig design55-65

Nope, sorry. I wish. Out of 5 trucks, the closest I have come is one has the driver's door panel drilled for the arm rest, but the actual arm rest was gone.

**vetnat** · 11-25-2017, 10:37 PM

Quote:

Originally Posted by Greg B

i'm looking for GMC turn signal/parking lights (64,65,66) that mount in the hood (cat eye style)

No lights.

Sam63c10 · 11-26-2017, 11:35 AM

Posted via Mobile Device

Sam63c10 · 11-26-2017, 11:36 AM

Have you got a passenger side motor mount perch, suitable for a 63-66 frame and v8 engine? If so would you ship to the Uk?
Posted via Mobile Device

YOLO · 11-26-2017, 11:13 PM

Quote:

Originally Posted by Sam63c10

Have you got a passenger side motor mount perch, suitable for a 63-66 frame and v8 engine? If so would you ship to the Uk?
Posted via Mobile Device

I have a set. Send me an email and I can email you a picture. Mark.Barbee78@gmail.com

**vetnat** · 11-27-2017, 01:13 AM

This is what I have, from a 1963. Not sure what engine it had, but was an automatic truck.

**Android04** · 12-04-2017, 12:03 PM

Either of them have a good wiper switch? Doesn't matter if its 1 or 2 speed switch.

zeusflash · 12-04-2017, 01:25 PM

Need a left rear window run track if its still there.

**vetnat** · 12-05-2017, 12:57 AM

Android, I have a wiper switch from a 1963.

**vetnat** · 12-05-2017, 12:58 AM

Zeus, sounds like some one closer to you might have what you are looking for.

**Android04** · 12-05-2017, 08:47 AM

Quote:

Originally Posted by vetnat

Android, I have a wiper switch from a 1963.

Sending you a PM

kvchevyboy21 · 01-14-2018, 04:19 PM

hi, is the guage cluster from the gmc still available and possibly dash wiring and other components?

**vetnat** · 01-14-2018, 09:10 PM

No longer have the GMC.

CousinTone · 03-03-2018, 04:06 PM

Hey Vetnat, on the blue one you still have, I need a section - the drivers side front pillar complete from seam to seam, inside and out and roof/drip rail from same pillar back to the interior seam at the rear end of opening on inside and out, 6 inches from drip up to roof. Are those areas fairly stable? If so how much would that be with shipping to CA, zip is 92870. If you would like a pic of what I'm looking for, just let me know and I'll get it to you so we're both 100% sure what we're talking about. Thank you sir. Tony "V"

**vetnat** · 03-03-2018, 09:00 PM

CousinTone, yes a picture would help.

Macdaddy1 · 03-03-2018, 10:33 PM

Do you have a complete steering column? I have a 65c10 with no steering column.

Pat

Hmh70 · 03-03-2018, 11:00 PM

Quote:

Originally Posted by Indian113

I need a piece of the sheet metal of one of the cabs. I have a cab with a bad dent on the back of the cab from under belt line to gas filler. it starts about 1/2 way across cab and about 12 inches below window.

I have a 60 c10 cab I'm parting I'm willing to cut out what you need

CousinTone · 03-03-2018, 11:57 PM

Quote:

Originally Posted by vetnat

CousinTone, yes a picture would help.

I could have guessed that after my "clear as mud" description. I'll get that over to you tomorrow and let me know if you have the item.

I appreciate the help. Tony "V"

**vetnat** · 03-04-2018, 01:00 AM

Macdaddy, I think the blue truck has a 3 on the tree column in it. I will look tomorrow.

Macdaddy1 · 03-04-2018, 09:51 AM

No I need an automatic column shift. Let me know if you come across any or if you know if somebody has one. Thanks for responding so fast.

Pat

10-03-2017, 12:11 AM	#76
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks 2 sets of mirrors, and one single. First set is in OK condition, a chunk of glass is missing out of one of them. I was thinking of using them myself, so the price is a little dear at $50 picked up. 2nd set is in poor shape, and probably not what you are looking for. Would take $20 for them. The singleton is in pretty good shape. $25. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

10-03-2017, 12:14 AM	#77
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks Singleton. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

10-03-2017, 12:20 AM	#78
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks More. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

11-25-2017, 11:33 AM	#79
inkfamous_13 Junior Member Join Date: Jan 2017 Location: Lake los angeles, CA Posts: 94	Re: parting out 2 trucks looking for any condition arm rest for m truck im partial to the orig design55-65

11-25-2017, 09:34 PM	#80
Greg B Registered User Join Date: Aug 2017 Location: Salinas Posts: 34	Re: parting out 2 trucks i'm looking for GMC turn signal/parking lights (64,65,66) that mount in the hood (cat eye style)

11-26-2017, 11:35 AM	#83
Sam63c10 Registered User Join Date: Aug 2016 Location: United Kingdom Posts: 29	Re: parting out 2 trucks Posted via Mobile Device

11-26-2017, 11:36 AM	#84
Sam63c10 Registered User Join Date: Aug 2016 Location: United Kingdom Posts: 29	Re: parting out 2 trucks Have you got a passenger side motor mount perch, suitable for a 63-66 frame and v8 engine? If so would you ship to the Uk? Posted via Mobile Device

11-27-2017, 01:13 AM	#86
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks This is what I have, from a 1963. Not sure what engine it had, but was an automatic truck. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

12-04-2017, 12:03 PM	#87
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 364	Re: parting out 2 trucks Either of them have a good wiper switch? Doesn't matter if its 1 or 2 speed switch.

12-04-2017, 01:25 PM	#88
zeusflash Registered User Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 690	Re: parting out 2 trucks Need a left rear window run track if its still there. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

12-05-2017, 12:57 AM	#89
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks Android, I have a wiper switch from a 1963. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

12-05-2017, 12:58 AM	#90
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks Zeus, sounds like some one closer to you might have what you are looking for. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

01-14-2018, 04:19 PM	#92
kvchevyboy21 Registered User Join Date: Mar 2017 Location: Yuba city california Posts: 7	Re: parting out 2 trucks hi, is the guage cluster from the gmc still available and possibly dash wiring and other components?

01-14-2018, 09:10 PM	#93
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks No longer have the GMC. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-03-2018, 04:06 PM	#94
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: parting out 2 trucks Hey Vetnat, on the blue one you still have, I need a section - the drivers side front pillar complete from seam to seam, inside and out and roof/drip rail from same pillar back to the interior seam at the rear end of opening on inside and out, 6 inches from drip up to roof. Are those areas fairly stable? If so how much would that be with shipping to CA, zip is 92870. If you would like a pic of what I'm looking for, just let me know and I'll get it to you so we're both 100% sure what we're talking about. Thank you sir. Tony "V"



Register or Log In To remove these advertisements.

03-03-2018, 09:00 PM	#95
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks CousinTone, yes a picture would help. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-03-2018, 10:33 PM	#96
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: parting out 2 trucks Do you have a complete steering column? I have a 65c10 with no steering column. Pat

03-04-2018, 01:00 AM	#99
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: parting out 2 trucks Macdaddy, I think the blue truck has a 3 on the tree column in it. I will look tomorrow. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-04-2018, 09:51 AM	#100
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: parting out 2 trucks No I need an automatic column shift. Let me know if you come across any or if you know if somebody has one. Thanks for responding so fast. Pat

Register or Log In To remove these advertisements.