|
06-04-2019, 05:41 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Getting ready
Getting the C 10 ready for the 2019 Hot Rod Power Tour last week & this week. Last week exhaust fixed two hangers where broke off. Oil & filter, greased everything good, washed waxed along with new rear air bags installed. Checked all the fluid levels again cleaned the interior good and treated the leather. Fixed the cruise control and got the rear disc brakes working better than ever before.
Yesterday had it at the front end alignment shop and today had 2 new front tires installed. Front's looked if'y! Started packing it this afternoon. 2- 2.5 ton floor jacks & stands wood to place under them and rubber mat to lay on if needed. My tool box with everything I could fit in it and more. Voltmeter, test light, timing light, rags towels for cleaning, water, antifreeze, cooler with drinks and plenty of water to drink, 10x10 tent with chairs. 100's of electrical connector's of all sizes, hammers, wheel puller tube flaring tool you name it I got it! 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
06-04-2019, 06:02 PM
|
#2 |
|
Where's my beer?
Join Date: Oct 2004
Location: Glen Allen, VA
Posts: 1,768
|
Re: Getting ready
sounds like you've covered all the bases! I'd love to do a leg or long haul the entire thing one day.
__________________
70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K |
|
|
|
|
06-04-2019, 06:13 PM
|
#3 |
|
Proprietor of Dale's Corner
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 15,834
|
Re: Getting ready
Have great time...post lots of pics
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
|
|
|
|
06-04-2019, 08:05 PM
|
#4 | |
|
Registered User
Join Date: Oct 2012
Location: Green Valley Arizona
Posts: 1,351
|
Re: Getting ready
Quote:
Edit....Don't forget a spare tire!!!
__________________
1970 C10 Short Stepper with 71/72 front clip. Last edited by BugzC10; 06-04-2019 at 08:11 PM. |
|
|
|
|
|
06-04-2019, 08:45 PM
|
#5 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Getting ready
Quote:
This will be the 5th Long Haul for the truck. Last year I drove the 56 Bel Air. Thanks, I do my best. There are a few of us on here going. I hope we can all meet up at some point and get some pictures together. ls1nova71, Bagd72Chevy, Advanced Design, smbrouss70, towbar & BlueJeep are going. 67ChevyRedneck and jeffg1010 are doing the first 2 stops. Truck is all loaded with tools and such now for clothes!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
06-04-2019, 11:07 PM
|
#6 |
|
Registered User
Join Date: Aug 2014
Location: Mena,Arkansas
Posts: 485
|
Re: Getting ready
Enjoy the trip! Hope it is a smooth one! I am sure you will share lots of pictures with the rest of us who can't make it.
__________________
68' with no bells or whistles unless I add'em. |
|
|
|
|
06-04-2019, 11:09 PM
|
#7 |
|
Registered User
Join Date: Oct 2013
Location: Montrose, CO
Posts: 328
|
Re: Getting ready
Enjoy yourself! PowerTour 2018 was one of the best times of my life.
It’s the best!
__________________
Jim 1972 K20 Cheyenne- 350/350/205 1972 K20 Cheyenne - 350/SM465/205 |
|
|
|
|
06-04-2019, 11:52 PM
|
#8 |
|
Registered User
Join Date: Apr 2014
Location: Azle,Texas
Posts: 2,248
|
Re: Getting ready
Quite the lineup of board members to cruise with.
 Have to say I'm more than a bit jealous of you Andy! I'm hoping to make it for at least a few legs of the trip in 2020, in my 72, if all goes to plan.Brian
__________________
Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod. |
|
|
|
|
06-05-2019, 06:09 AM
|
#9 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Getting ready
Quote:
I'm hoping we can all get together on the tour and run together are at least be some what together. It's hard trying to keep a big group together on this kind of trip. I'm also hoping we can do a photo shot with all the trucks one day. Pictures will be forth coming but may take a bit before I can post them here. My face book page https://www.facebook.com/C10Tour/?ref=your_pages will have live feeds and the most up to date pictures as the week goes by.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
|
06-05-2019, 07:10 PM
|
#10 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Getting ready
Well it looks like I will have a co-pilot riding with me. My friend from Covington LA isn't going to drive his car so he is riding with me. This should be fun. I'll have a navigator and a photo shooter!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
06-07-2019, 06:29 AM
|
#11 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Getting ready
Zero hr! Hot Rod Power Tour starts now! We are fixing to pull out and enjoy a week worth of hot rods. Along with about 6000 others!
I'll be back in about 10 day's.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
06-07-2019, 07:02 PM
|
#12 |
|
Registered User
Join Date: Aug 2016
Location: Lake Forest, CA
Posts: 2,177
|
Re: Getting ready
You can help others out as well. That's the cool part.
__________________
"Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC |
|
|
|
|
06-07-2019, 09:14 PM
|
#13 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
|
Re: Getting ready
I'm in the hotel in Concord, made it to North Carolina this afternoon. Hopefully the rain will stop since it's been raining here just about all day.
Andy, this is what I'm driving.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
