Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-25-2017, 05:23 AM | #1 |
Registered User
Join Date: Jan 2017
Location: Wichita
Posts: 639
|
Stopping rust inside door panel
While working on getting everything lubed and working properly on my door, I noticed what resembles a bunch of rock wool in the bottom of my door(s). Someone told me it might be what they originally sprayed the inside of doors with to somewhat sound deaden the door. It's that our the work if pack rats, but never the less, it was damp and needed to come out, which it did.
Now I'm tasked with, how do I treat the insides of my doors so they don't rust any more than already probably are? Spray rust neutralizer in there and hope for the best? I also have a jug of metal etch.....is that a good solution? If I can get satisfactory results from one of those or something else, what's a good way to coat the inside to protect from future? Spray it with primer and paint and hope for best once again? I'd also like to deaden the panels so what about sound deadening spray? Keep in mind I don't have much access and I don't want to cut the door open. This is on a 1960 door. |
05-02-2017, 12:08 AM | #2 | |
Registered User
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
|
Re: Stopping rust inside door panel
Quote:
I clean the door as best as I can - and then hose it out outside and blow it out with air, and tilt it so you get all the water out. Once dry, I lay it flat on one of those folding stands, inside up and tape up the obvious holes, like door locks, from the outside. Then I pour some rust encapsulator inside and tilt the door around until it's completely covered inside. Often you can see it seeping thru the edge of the door skin. Then I tilt the door up and pour the excess out a drain hole. Once well drained, I lay it back down, do my best to wipe off any leaks and drips, and leave it until it dries. Seems to work great for me. I have a quart of Eastwood Rust Encapsulator waiting for my doors.
__________________
Scott ______________ my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979 |
|
05-02-2017, 12:20 AM | #3 | |
Registered User
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
|
Re: Stopping rust inside door panel
Quote:
__________________
Scott ______________ my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979 Last edited by Scott2; 05-02-2017 at 12:22 AM. Reason: Duplicate posting |
|
05-05-2017, 08:46 PM | #4 |
Registered User
Join Date: Aug 2003
Location: Nashport, OH
Posts: 549
|
Re: Stopping rust inside door panel
This stuff is supposed to be really good but I have not used it yet.
http://www.3m.com/3M/en_US/collision...vity-wax-plus/ |
05-31-2017, 08:02 PM | #5 |
Registered User
Join Date: Mar 2017
Location: Etowah, TN
Posts: 210
|
Re: Stopping rust inside door panel
If Your Door is in Good Shape - I would use the Wax ..
They also make a Wax Similar - Land Rover has been using it for Decades Two Different Types _ 1 Type Flows very Slowly forever . Other Type Flows then Hardens down in all the Seams and Welds - to Keep Out O2 and Water .. This Type of Wax - will do other Things for Your Doors LOL : http://www.waxcenter.com/ Land Rovers : http://www.waxoilme.co.uk/?page_id=4 Buy It Here in Spray Can Dinitrol Range - RC 900 Rust Converter goes about 8 times Deeper then Others .. Video's on Line . . Then there is the Home Made Version - Maritime Solution . 2 1/2 quarts turpentine 12 oz. beeswax / candle wax 1 quart light machine oil With a cheese shredder, cut the wax into the turpentine, stir until the wax has dissolved, (takes a long time; you can use very low heat (a warm room) to aid but be careful) and thin with the machine oil to a brushable / sprayable consistency. Apply liberally. You can use a hand spray bottle to get into closed-off sections if you have a small access hole. Land Rover - Swedes Volvo's : Spray Type http://www.roversnorth.com/ProductDe...006&type=0&eq= |
01-09-2018, 11:59 AM | #6 | |
Registered User
Join Date: Mar 2015
Location: Castle Rock, CO
Posts: 534
|
Re: Stopping rust inside door panel
Quote:
__________________
Scott ______________ my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979 |
|
01-15-2018, 11:34 PM | #7 |
Registered User
Join Date: Dec 2017
Location: Niceville Florida
Posts: 347
|
Re: Stopping rust inside door panel
I have used Fluid Film which is very similar to the waxoilme product. Google it and checke it out.
|
Bookmarks |
|
|