PA Yet another 72 going under the torch, factory 3 speed on the tree! - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 01-11-2018, 05:08 PM

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

**1rippen6** · 01-11-2018, 10:58 PM

Quote:

Originally Posted by smbrouss70

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

Will do it this weekend.

**1rippen6** · 01-13-2018, 01:00 PM

Quote:

Originally Posted by smbrouss70

$80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind.

Medium flat rate for 15 looks like the best shipping option. I also completed the repair on the latch. I will PM my PP info.

**1rippen6** · 01-13-2018, 02:21 PM

Quote:

Originally Posted by mortoyz

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

Here is a set but I have a better set didn't realized they had groove until I carried them to the house LOL

**1rippen6** · 01-13-2018, 02:27 PM

Quote:

Originally Posted by 2006gmcdmax

Sounds good, thanks.

Not sure I can help I cut the floor nuts out of the other blazer and they are rusty please see pictures. It didn't help that someone sprayed foam under everything on this blazer I sure it held moisture in. I took a closer look at the spare tire nuts and they look good externally but the thread look like they might have some issues hard to tell because they are fine thread. I can run a tap through them if you are still interested.

2006gmcdmax · 01-14-2018, 03:48 AM

Quote:

Originally Posted by 1rippen6

Not sure I can help I cut the floor nuts out of the other blazer and they are rusty please see pictures. It didn't help that someone sprayed foam under everything on this blazer I sure it held moisture in. I took a closer look at the spare tire nuts and they look good externally but the thread look like they might have some issues hard to tell because they are fine thread. I can run a tap through them if you are still interested.

I think I would be willing to pay you more for something more solid than what's pictured. If the others just need a tap run through them and the blast clean then, yes I interested. Thanks 1rippen6.

**1rippen6** · 01-14-2018, 01:17 PM

Quote:

Originally Posted by mortoyz

Thanks. I’ll take em. Do you happen to have the plate that goes under the latch assembly on the hatch?

Here is a picture of a better catch 20.

**1rippen6** · 01-14-2018, 06:23 PM

Quote:

Originally Posted by 2006gmcdmax

I think I would be willing to pay you more for something more solid than what's pictured. If the others just need a tap run through them and the blast clean then, yes I interested. Thanks 1rippen6.

Threads cleaned up better than I thought 23 shipped for the pair.

**mortoyz** · 01-14-2018, 08:33 PM

Quote:

Originally Posted by 1rippen6

Here is a picture of a better catch 20.

I’ll take it. What will the total be with front hold down brackets?

**1rippen6** · 01-14-2018, 11:06 PM

Quote:

Originally Posted by mortoyz

I’ll take it. What will the total be with front hold down brackets?

52 total shipped

smbrouss70 · 01-15-2018, 03:57 AM

Quote:

Originally Posted by 1rippen6

Medium flat rate for 15 looks like the best shipping option. I also completed the repair on the latch. I will PM my PP info.

Paypal sent, Thanks Dwayne!

**1rippen6** · 01-15-2018, 07:50 AM

Quote:

Originally Posted by smbrouss70

Paypal sent, Thanks Dwayne!

Received I will box up tonight should ship out tomorrow.

**1rippen6** · 01-17-2018, 10:51 PM

Here you go.

tocker1 · 02-15-2018, 12:24 AM

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

**1rippen6** · 02-15-2018, 08:33 AM

Quote:

Originally Posted by tocker1

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

Yes. I have those parts but not the nicest pieces. I will get some pictures tomorrow I have plans tonight. That should be everything you need except for the seat and clamps on the front but they are reproduced.

**1rippen6** · 02-17-2018, 11:46 AM

Quote:

Originally Posted by tocker1

Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

I'm having trouble loading pictures will try again later tonight.

**1rippen6** · 02-17-2018, 02:36 PM

Pics

**1rippen6** · 02-17-2018, 02:37 PM

Top plate on picture below has some holes the rest are decent.

**1rippen6** · 02-17-2018, 02:38 PM

Now last

rossboss · 02-21-2018, 06:25 PM

do you have a folding jack handle,

**1rippen6** · 02-21-2018, 10:25 PM

Quote:

Originally Posted by rossboss

do you have a folding jack handle,

I do but think they are a couple inches longer then the original for a blazer.

**leddzepp** · 02-22-2018, 11:34 AM

Do you have any 4x4 dipstick/tube setups available? Thanks!

**1rippen6** · 02-22-2018, 11:49 AM

Sorry, I have the dipstick no tube the mounting tab was rusted off.

**leddzepp** · 02-22-2018, 11:57 AM

Thanks, appreciate you checking!

SVFK5 · 03-08-2019, 10:55 AM

Are you selling the frame?

01-11-2018, 05:08 PM	#176
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: Yet another 72 going under the torch, factory 3 speed on the tree! $80 for latches and $20 for the fill tube, correct? I think that is fair. Go ahead and fix that latch and get me a shipping quote for 70578, if you don't mind. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-17-2018, 10:51 PM	#188
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Here you go. Attached Images

02-15-2018, 12:24 AM	#189
tocker1 Registered User Join Date: Jun 2015 Location: Modesto Ca Posts: 82	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Do you have the channel and plates for adding a rear seat to my non rear seat option blazer? Any other parts i need?

02-17-2018, 02:36 PM	#192
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Pics Attached Images

02-17-2018, 02:37 PM	#193
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Top plate on picture below has some holes the rest are decent.

02-17-2018, 02:38 PM	#194
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Now last Attached Images

02-21-2018, 06:25 PM	#195
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Re: Yet another 72 going under the torch, factory 3 speed on the tree! do you have a folding jack handle,

02-22-2018, 11:34 AM	#197
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,978	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Do you have any 4x4 dipstick/tube setups available? Thanks! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

02-22-2018, 11:49 AM	#198
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Sorry, I have the dipstick no tube the mounting tab was rusted off.

02-22-2018, 11:57 AM	#199
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,978	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Thanks, appreciate you checking! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

03-08-2019, 10:55 AM	#200
SVFK5 Registered User Join Date: Mar 2019 Location: Grand Rapids Posts: 13	Re: Yet another 72 going under the torch, factory 3 speed on the tree! Are you selling the frame?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.