20x11's?? will they fit?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Duraburb · 04-11-2018, 01:26 PM

Hi guys! Was looking at trying to order up a set of Detroit Steel 8-lug smoothies for my c20 Burb. Was looking at the 20x8 for the fron and was hoping to do their 20x11's for the rear. ANybody have any advice/suggestions on this setup? Backspacing that will work, etc. It's factory 8 lug and will be on air ride . with stock-ish suspension, big c-notch in the rear, factory disc brake front. Thanks for any help!!

nastety92 · 04-11-2018, 02:09 PM

I have a 17x8 with a 255 wide tire on my 67 Burb. I can't see how this would fit without cutting the rear floor and tubs. Maybe I'm wrong though.

slowcpe · 04-11-2018, 03:10 PM

Curious on this myself. I've been eying the Delrays for my '72 c10.

Duraburb · 04-11-2018, 03:50 PM

I'll be cutting the floor out anyway, so don't mind widening the tubs while I'm at it. My main concern is trying to find a good backspacing

**LockDoc** · 04-11-2018, 03:56 PM

-
I tried to figure out what rims I would need to put these tires on the panel Truck. I can't find my notes right now but I had it figured out that I would need 15x11's with a 7.5" back space. My tubs are already widened almost to the frame. I just don't want them sticking out of the wheel wells.....

LockDoc

**Hart_Rod** · 04-12-2018, 09:51 AM

Quote:

Originally Posted by Duraburb

Hi guys! Was looking at trying to order up a set of Detroit Steel 8-lug smoothies for my c20 Burb. Was looking at the 20x8 for the fron and was hoping to do their 20x11's for the rear. ANybody have any advice/suggestions on this setup? Backspacing that will work, etc. It's factory 8 lug and will be on air ride . with stock-ish suspension, big c-notch in the rear, factory disc brake front. Thanks for any help!!

20x11's would be pretty tight with stock wheel tubs. I have a bolt in c-notch with bags. I'm running 20x10s (5"BS) with a 295 45 and it's close. On occasion, I get a slight rub on the inner wheel well on the tire bulge if I turn really hard. You would have to be spot on with your backspacing AND get the right tire size with 20x11s.

Duraburb · 04-16-2018, 03:44 PM

Thanks everyone for the ideas and suggestions! I'm leaning towards the 20x11's and getting 7" backspacing, as I'm planning on widening the tubs anyway Just want to make sure i clear the outer portion of the fender. Thanks again!

04-11-2018, 01:26 PM	#1
Duraburb Registered User Join Date: Aug 2014 Location: Eureka CA Posts: 94	20x11's?? will they fit?! Hi guys! Was looking at trying to order up a set of Detroit Steel 8-lug smoothies for my c20 Burb. Was looking at the 20x8 for the fron and was hoping to do their 20x11's for the rear. ANybody have any advice/suggestions on this setup? Backspacing that will work, etc. It's factory 8 lug and will be on air ride . with stock-ish suspension, big c-notch in the rear, factory disc brake front. Thanks for any help!! __________________ 1972 C20 Suburban, Bagged and c10 swapped Suspension (sold) 1969 Jimmy, 2wd swapped. bagged, body dropped

04-11-2018, 02:09 PM	#2
nastety92 Registered User Join Date: Jun 2016 Location: Rockland, MA Posts: 367	Re: 20x11's?? will they fit?! I have a 17x8 with a 255 wide tire on my 67 Burb. I can't see how this would fit without cutting the rear floor and tubs. Maybe I'm wrong though.

04-11-2018, 03:10 PM	#3
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: 20x11's?? will they fit?! Curious on this myself. I've been eying the Delrays for my '72 c10. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

04-11-2018, 03:50 PM	#4
Duraburb Registered User Join Date: Aug 2014 Location: Eureka CA Posts: 94	Re: 20x11's?? will they fit?! I'll be cutting the floor out anyway, so don't mind widening the tubs while I'm at it. My main concern is trying to find a good backspacing __________________ 1972 C20 Suburban, Bagged and c10 swapped Suspension (sold) 1969 Jimmy, 2wd swapped. bagged, body dropped

04-11-2018, 03:56 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,315	Re: 20x11's?? will they fit?! - I tried to figure out what rims I would need to put these tires on the panel Truck. I can't find my notes right now but I had it figured out that I would need 15x11's with a 7.5" back space. My tubs are already widened almost to the frame. I just don't want them sticking out of the wheel wells..... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-16-2018, 03:44 PM	#7
Duraburb Registered User Join Date: Aug 2014 Location: Eureka CA Posts: 94	Re: 20x11's?? will they fit?! Thanks everyone for the ideas and suggestions! I'm leaning towards the 20x11's and getting 7" backspacing, as I'm planning on widening the tubs anyway Just want to make sure i clear the outer portion of the fender. Thanks again! __________________ 1972 C20 Suburban, Bagged and c10 swapped Suspension (sold) 1969 Jimmy, 2wd swapped. bagged, body dropped

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.